Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Home >>> NXP >>> LPC8N04 Datasheet

LPC8N04 Datasheet

Part Name
Other PDF
  not available.
LPC8N04 image

General description
The NXP LPC8N04 is an IC optimized for an entry level Cortex-M0+ MCU with built-in NFC interface. LPC8N04 supports an effective system solution with a minimal number of external components for NFC related applications. The embedded ARM Cortex-M0+ offers flexibility to the users of this IC to implement their own dedicated solution. The LPC8N04 contains multiple features, including multiple power-down modes and a selectable CPU frequency of up to 8 MHz, for ultra-low power consumption.

Features and benefits
   ◆ARM Cortex-M0+ processor running at frequencies of up to 8 MHz
   ◆ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC)
   ◆ARM Serial Wire Debug (SWD)
   ◆System tick timer
   ◆IC reset input
   ◆32 kB on-chip flash programming memory
   ◆4 kB on-chip EEPROM of which 256 byte can be write protected
   ◆8 kB SRAM
■Digital peripherals
   ◆Up to 12 General Purpose Input Output (GPIO) pins with configurable pull-up/pull-down resistors and repeater mode
   ◆GPIO pins which can be used as edge and level sensitive interrupt sources
   ◆High-current drivers/sinks (20 mA) on four GPIO pins
   ◆High-current drivers/sinks (20 mA) on two I2C-bus pins
   ◆Programmable WatchDog Timer (WDT)
■Analog peripherals
   ◆Temperature sensor with 1.5℃ absolute temperature accuracy between 40℃ and +85℃
■Communication interfaces
   ◆NFC/RFID ISO 14443 type A interface
   ◆I2C-bus interface supporting full I2C-bus specification and fast mode with a data rate of 400 kbit/s, with multiple address recognition and monitor mode
■Energy harvesting functionality to power the LPC8N04.
■Clock generation
   ◆8 MHz internal RC oscillator, trimmed to 2 % accuracy, which is used for the system clock
   ◆Timer oscillator operating at 32 kHz linked to the RTC timer unit
■Power control
   ◆Support for 1.72 V to 3.6 V external voltages
   ◆The LPC8N04 can also be powered from the NFC field
   ◆Activation via NFC possible
   ◆Integrated Power Management Unit (PMU) for versatile control of power consumption
   ◆Four reduced power modes for ARM Cortex-M0+: sleep, deep sleep, deep power-down and battery off
   ◆Power gating for each analog peripheral for ultra-low power operation
   ◆< 50 nA IC current consumption in battery off mode at 3.0 V
   ◆Power-On Reset (POR)
■Unique device serial number for identification

■ Configurable LED strip/christmas tree LEDs via NFC
■ Smart toy/interactive robot data logger
■ Buttonless/contactless control panel
■ Contactless diagnostic
■ NFC e-locker
■ Smart manufacturing

Page Link's: 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39 

Part Name
32-bit ARM Cortex-M3 MCU; up to 512 kB flash and 64 kB SRAM with Ethernet, USB 2.0 Host/Device/OTG, CAN
Philips Electronics
Single-chip 16-bit/32-bit microcontrollers; 8 kB/16 kB/32 kB flash with ISP/IAP, fast ports and 10-bit ADC
Philips Electronics
8-bit 80C51 5 V low power 16/32/64 kB Flash microcontroller with 1 kB RAM
Philips Electronics
Kinetis KL33 With Up To 256 KB Flash 48 MHz Cortex-M0+ Based Microcontroller
Freescale Semiconductor
16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC and external memory interface
Philips Electronics
8-bit microcontroller with accelerated two-clock 80C51 core 4 kB/8 kB/16 kB 3 V byte-erasable flash with 8-bit ADCs
Philips Electronics
Single-chip 16-bit/32-bit microcontrollers; 512 kB flash, with 32 segment x 4 LCD driver
Philips Electronics
16/32-bit ARM microcontrollers; 256 kB ISP/IAP Flash with CAN, 10-bit ADC and external memory interface
Philips Electronics

Share Link: 

All Rights Reserved© datasheetq.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]