Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Home >>> ST-Microelectronics >>> M29W320DB Datasheet

M29W320DB Datasheet

Part NameDescriptionManufacturer
M29W320DB 32 Mbit (4Mbx8 or 2Mbx16, Non-uniform Parameter Blocks, Boot Block), 3V Supply Flash memory ST-Microelectronics
STMicroelectronics ST-Microelectronics
Other PDF  not available.
PDF DOWNLOAD     
M29W320DB image

Summary description
The M29W320D is a 32 Mbit (4Mb x8 or 2Mb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage (2.7 to 3.6V) supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.
The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. Each block can be protected independently to prevent accidental Program or Erase commands from modifying the memory. Program and Erase commands are written to the Command Interface of the memory. An on-chip Program/Erase Controller simplifies the process of programming or erasing the memory by taking care of all of the special operations that are required to update the memory contents. The end of a program or erase operation can be detected and any error conditions identified. The command set required to control the memory is consistent with JEDEC standards.

Feature summary
■ Supply Voltage
   – VCC = 2.7V to 3.6V for Program, Erase and Read
   – VPP =12V for Fast Program (optional)
■ Access time: 70, 90ns
■ Programming time
– 10µs per Byte/Word typical
■ 67 memory blocks
   – 1 Boot Block (Top or Bottom Location)
   – 2 Parameter and 64 Main Blocks
■ Program/Erase controller
   – Embedded Byte/Word Program algorithms
■ Erase Suspend and Resume modes
   – Read and Program another Block during Erase Suspend
■ Unlock Bypass Program command
   – Faster Production/Batch Programming
■ VPP/WP pin for Fast Program and Write Protect
■ Temporary Block Unprotection mode
■ Common Flash Interface
   – 64 bit Security code
■ Low power consumption
   – Standby and Automatic Standby
■ 100,000 Program/Erase cycles per block
■ Electronic Signature
   – Manufacturer Code: 0020h
   – Top Device Code M29W320DT: 22CAh
   – Bottom Device Code M29W320DB: 22CBh
■ ECOPACK® packages available

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51 
 

Other manufacturer searches related to M29W320DB

Part NameDescriptionPDFManufacturer
M29W320EB 32Mbit (4Mbx8 or 2Mbx16, Uniform Parameter Blocks, Boot Block) 3V supply Flash memory View Numonyx -> Micron
M29DW323DB 32 Mbit (4Mb x8 or 2Mb x16, Dual Bank 8:24, Boot Block) 3V Supply Flash Memory View Numonyx -> Micron
M36W432BG 32 Mbit (2Mb x16, Boot Block) Flash Memory and 4 Mbit (256Kb x16) SRAM, Multiple Memory Product View STMicroelectronics
M29W128GH 128 Mbit (16 Mb x 8 or 8 Mbx 16, page, uniform block) 3 V supply Flash memory View Numonyx -> Micron
M28R400CB 4 Mbit (256Kb x16, Boot Block) 1.8V Supply Flash Memory View STMicroelectronics
LH28F320S3 32-MBIT(4MBx8/2MBx16)Smart 3 Flash MEMORY View Sharp Electronics
AB28F400BX-T90 4-MBIT (256K x16, 512K x8) BOOT BLOCK FLASH MEMORY FAMILY View Intel
A28F200BX-B 2-MBIT (128K x 16, 256K x 8) BOOT BLOCK FLASH MEMORY FAMILY View Intel
M29W320DB 32 Mbit (4Mbx8 or 2Mbx16, Non-uniform Parameter Blocks, Boot Block), 3V Supply Flash memory View Numonyx -> Micron
M29W128 128 Mbit 3V Supply Flash Memory View Numonyx -> Micron

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]