Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Home >>> ST-Microelectronics >>> M50FW016N1G Datasheet

M50FW016N1G Datasheet

Part NameDescriptionManufacturer
M50FW016N1G 16 Mbit (2Mb x8, Uniform Block) 3V Supply Firmware Hub Flash Memory ST-Microelectronics
STMicroelectronics ST-Microelectronics
Other PDF  not available.
PDF DOWNLOAD     
M50FW016 image

SUMMARY DESCRIPTION
The M50FW016 is a 16 Mbit (2Mb x8) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage (3.0 to 3.6V) supply. For fast programming and fast erasing, an optional 12V power supply can be used to reduce the programming and the erasing times.
The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. Blocks can be protected individually to prevent accidental Program or Erase commands from modifying the memory. Program and Erase commands are written to the Command Interface of the memory. An on-chip Program/Erase Controller simplifies the process of programming or erasing the memory by taking care of all of the special operations that are required to update the memory contents. The end of a program or erase operation can be detected and any error conditions identified. The command set required to control the memory is consistent with JEDEC standards.

FEATURES SUMMARY
■ SUPPLY VOLTAGE
   – VCC = 3 V to 3.6 V for Program, Erase and Read Operations
   – VPP = 12 V for Fast Program and Fast Erase
■ TWO INTERFACES
   – Firmware Hub (FWH) Interface for embedded operation with PC Chipsets
   – Address/Address Multiplexed (A/A Mux)
      Interface for programming equipment compatibility
■ FIRMWARE HUB (FWH) HARDWARE INTERFACE MODE
   – 5 Signal Communication Interface supporting Read and Write Operations
   – Hardware Write Protect Pins for Block Protection
   – Register Based Read and Write Protection
   – 5 Additional General Purpose Inputs for platform design flexibility
   – Multi-byte Read Operation (4/16/128-byte)
   – Synchronized with 33 MHz PCI clock
■ BYTE PROGRAMMING TIME
   – Single Byte Mode: 10µs (typical)
   – Quadruple Byte Mode: 2.5µs (typical)
■ 32 UNIFORM 64 Kbyte MEMORY BLOCKS
■ PROGRAM and ERASE SUSPEND
   – Read other Blocks during Program/Erase Suspend
   – Program other Blocks during Erase Suspend
■ FOR USE in PC BIOS APPLICATIONS
■ ELECTRONIC SIGNATURE
   – Manufacturer Code: 20h
   – Device Code: 2Eh

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45 
 

Other manufacturer searches related to M50FW016N1G

Part NameDescriptionPDFManufacturer
M29DW323DB 32 Mbit (4Mb x8 or 2Mb x16, Dual Bank 8:24, Boot Block) 3V Supply Flash Memory View Numonyx -> Micron
M29W128GH 128 Mbit (16 Mb x 8 or 8 Mbx 16, page, uniform block) 3 V supply Flash memory View Numonyx -> Micron
M29W320EB 32Mbit (4Mbx8 or 2Mbx16, Uniform Parameter Blocks, Boot Block) 3V supply Flash memory View Numonyx -> Micron
M29DW324DB 32 Mbit (4Mb x8 or 2Mb x16, Dual Bank 16:16, Boot Block) 3V Supply Flash Memory View Numonyx -> Micron
M58CR032C 32 Mbit (2Mb x 16, Dual Bank, Burst ) 1.8V Supply Flash Memory View STMicroelectronics
49LF002 2 Mbit / 3 Mbit / 4 Mbit / 8 Mbit Firmware Hub View Silicon Storage Technology
AB28F400BX-T90 4-MBIT (256K x16, 512K x8) BOOT BLOCK FLASH MEMORY FAMILY View Intel
M36W432BG 32 Mbit (2Mb x16, Boot Block) Flash Memory and 4 Mbit (256Kb x16) SRAM, Multiple Memory Product View STMicroelectronics
M29W128 128 Mbit 3V Supply Flash Memory View Numonyx -> Micron
28F160B3 SMART 3 ADVANCED BOOT BLOCK WORD-WIDE 4-MBIT (256K X 16), 8-MBIT (512K X 16), 16-MBIT (1024K X 16) FLASH MEMORY FAMILY View Intel

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]