Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Home >>> MaximIC >>> MAX680CSA Datasheet

MAX680CSA Datasheet - MaximIC

Part Name
Description
MFG CO.
MAX680CSA
MaximIC
Maxim Integrated MaximIC
Other PDF
  not available.
PDF
DOWNLOAD     
MAX680CSA image

General Description
The MAX680/MAX681 are monolithic, CMOS, dual charge-pump voltage converters that provide ±10V outputs from a +5V input voltage. The MAX680/MAX681 provide both a positive step-up charge pump to develop +10V from +5V input and an inverting charge pump to generate the -10V output. Both parts have an on-chip, 8kHz oscillator. The MAX681 has the capacitors internal to the package, and the MAX680 requires four external capacitors to produce both positive and negative voltages from a single supply.
The output source impedances are typically 150Ω, providing useful output currents up to 10mA. The low quiescent current and high efficiency make this device suitable for a variety of applications that need both positive and negative voltages generated from a single supply.
The MAX864/MAX865 are also recommended for new designs. The MAX864 operates at up to 200kHz and uses smaller capacitors. The MAX865 comes in the smaller µMAX package.

Features
♦ 95% Voltage-Conversion Efficiency
♦ 85% Power-Conversion Efficiency
♦ +2V to +6V Voltage Range
♦ Only Four External Capacitors Required (MAX680)
♦ No Capacitors Required (MAX681)
♦ 500µA Supply Current
♦ Monolithic CMOS Design

Applications
   The MAX680/MAX681 can be used wherever a singlepositive supply is available and where positive and negative voltages are required. Common applications include generating ±6V from a 3V battery and generating ±10V from the  standard +5V logic supply (for use with analog circuitry). Typical applications include:
   ±6V from 3V Lithium Cell
   Hand-Held Instruments
   Data-Acquisition Systems
   Panel Meters
   ±10V from +5V Logic Supply
   Battery-Operated Equipment
   Operational Amplifier Power Supplies

Page Link's: 1  2  3  4  5  6  7  8 
 

Part Name
Description
PDF
MFG CO.
0.5mm Pitch SMT Board to Board Connector
HIROSE ELECTRIC
High breakdown voltage type is available (1.5 kV between open contacts) TX-D RELAYS
Panasonic Corporation
TQ RELAYS
Panasonic Corporation
2 A CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE TX RELAYS
Panasonic Corporation
2 A CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE TX RELAYS
Matsushita Electric Works
TX-S RELAYS Very High Sensitivity, 50 mW (nominal operating) Rely with LT style pin layout
Panasonic Corporation
0.5mm Pitch SMT Board to Board Connector
HIROSE ELECTRIC
0.5mm Pitch Board to Board Connector
HIROSE ELECTRIC
0.5mm Pitch Board to Board Connector
HIROSE ELECTRIC
1a/1c 10A cubic type power relays
Panasonic Corporation

Share Link: 

All Rights Reserved© datasheetq.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]