Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Home >>> NexFlash >>> NX25F011A Datasheet

NX25F011A Datasheet

Part NameDescriptionManufacturer
NX25F011A 1M-BIT AND 4M-BIT SERIAL FLASH MEMORIES WITH 4-PIN SPI INTERFACE NexFlash
NexFlash -> Winbond Electronics NexFlash
Other PDF  not available.
PDF DOWNLOAD     
NX25F011A image

DESCRIPTION
The NX25F011A and NX25F041A Serial Flash memories provide a storage solution for systems limited in power, pins, space, hardware, and firmware resources. They are ideal for applications that store voice, text, and data in a portable or mobile environment. Using NexFlash's patented single transistor EEPROM cell, the devices offer a high-density, low-voltage, low-power, and cost-effective non-volatile memory solution. The devices operate on a single 5V or 3V (2.7V-3.6V) supply for Read and Erase/Write with typical current consumption as low as 5 mA active and less than 1 µA standby. Sector erase/write speeds as fast as 5 ms increase system performance, minimize power-on time, and maximize battery life.

FEATURES
• Flash Storage for Resource-Limited Systems
   – Ideal for portable/mobile and microcontroller-based applications that store voice, text, and data
• NexFlash Serial Flash Memory
   – Patented single transistor EEPROM technology
   – High-density, low-voltage & power, cost-effective
   – Small 264-byte sectors
   – 10K/100K write cycles, ten years data retention
• Ultra-low Power for Battery-Operation
   – Single 5V or 3V supply for read and erase/write
   – 1 µA standby current, 5 mA active @ 3V (typical)
   – Low frequency read command for very low power
   – No pre-erase. Erase/Write time of 5 ms/sector @ 5V ensures efficient battery use JUNE 1999
• 4-pin SPI Serial Interface
   – Easily interfaces with popular microcontrollers
   – Clock operation as fast as 16 MHz
• On-chip Serial SRAM
   – Dual 264-byte Read/Write SRAM buffers
   – Use in conjunction with or independent of Flash
   – Off-loads RAM-limited microcontrollers
• Special Features for Media-Storage Applications
   – Byte-level addressing
   – Transfer and compare sector to SRAM commands
   – Versatile hardware and software write-protection
   – Alternate oscillator frequency for EMI sensitive applications.
   – In-system electronic part number identification
   – Removable Serial Flash Module package option

 

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26 
 

Other manufacturer searches related to NX25F011A

Part NameDescriptionPDFManufacturer
IS25F011A 1M-BIT, 2M-BIT, AND 4M-BIT SERIAL FLASH MEMORIES WITH 4-PIN SPI INTERFACE View Integrated Silicon Solution
25X10BLIG 1M-BIT, 2M-BIT AND 4M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL I/O SPI View Winbond
W25X10L 1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI View Winbond
NX25F011B 1M-BIT, 2M-BIT, AND 4M-BIT SERIAL FLASH MEMORIES WITH 4-PIN SPI INTERFACE View Unspecified
25X10ALAIZ 1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI View Winbond
25Q40BWIG 1.8V 4M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI View Winbond
25X10AVIG 1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI View Winbond
ST72321M6 80-pin 8-bit MCU with 32 to 60 Kbytes Flash, ADC, five timers, SPI, SCI, I2C interface View STMicroelectronics
25Q16 8M-BIT, 16M-BIT AND 32M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI View Winbond
LE25FS406 4M-bit (512K×8) Serial Flash Memory View SANYO -> Panasonic

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]