Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Part Name  
Home >>> Philips >>> TDA4689 Datasheet

TDA4689 Datasheet

Part NameDescriptionManufacturer
TDA4689 Video processor with automatic cut-off control Philips
Philips Electronics Philips
PDF DOWNLOAD     
TDA4689 image

GENERAL DESCRIPTION
The TDA4689 is a monolithic integrated circuit with a luminance and a colour difference interface for video processing in TV receivers. Its primary function is to process the luminance and colour difference signals from a colour decoder which is equipped e.g. with the multistandard decoder TDA4655 or TDA9160 plus delay line TDA4661 and the Picture Signal Improvement (PSI) IC, TDA467x, or from a feature module.

FEATURES
• Operates from an 8 V DC supply
• Black level clamping of the colour difference, luminance and RGB input signals with coupling-capacitor for DC level storage
• Two analog RGB inputs, selected either by fast switch signals or via I2C-bus; brightness and contrast control of both RGB inputs
• Saturation, contrast, brightness and white adjustment via I2C-bus
• Same RGB output black levels for Y/CD and RGB input signals
• Timing pulse generation from either a 2 or 3-level sandcastle pulse for clamping, vertical synchronization and cut-off timing pulses
• Automatic cut-off control or clamped output selectable via I2C-bus
• Automatic cut-off control with picture tube leakage current compensation
• Cut-off measurement pulses after end of the vertical blanking pulse or end of an extra vertical flyback pulse
• Ultra-black or nominal black blanking selectable via I2C-bus in clamped output mode
• Two switch-on delays to prevent discolouration before steady-state operation
• Average beam current and peak drive limiting
• PAL/SECAM or NTSC matrix selection via I2C-bus
• Emitter-follower RGB output stages to drive the video output stages
• I2C-bus controlled DC output e.g. for hue-adjust of NTSC (multistandard) decoders
• Positive amplification factor of cut-off control voltage.

 

Other manufacturer searches related to TDA4689

Part NameDescriptionPDFManufacturer
TDA9209 150 MHZ PIXEL VIDEO CONTROLLER WITH CUT-OFF OUTPUTS AND VIDEO DETECTION View STMicroelectronics
LS7540 TOUCH CONTROL CONTINUOUS DIMMER with AUTOMATIC GAIN CONTROL (AGC) View LSI Corporation
C4600 OCXO Standard Package Low Aging AT-Cut and SC-Cut Crystal Options Fast Warm-up View Vectron International
LS7541 TOUCH CONTROL STEP DIMMER LIGHT SWITCH WITH AUTOMATIC GAIN CONTROL (AGC) View LSI Corporation
UPC1158H2 Low Noise Preamplifier with Automatic Level Control View NEC => Renesas Technology
MAX9515 1mm x 1mm Video Filter Amplifier with Automatic Shutdown and 2V/V Gain View Maxim Integrated
VSC7940 SONET/SDH 3.125Gb/s Laser Diode Driver with Automatic Power Control View Vitesse Semiconductor
VSC7939 SONET/SDH 3.125Gb/s Laser Diode Driver with Automatic Power Control View Vitesse Semiconductor
VSC7938R0 SONET/SDH 3.125Gb/s Laser Diode Driver with Automatic Power Control View Vitesse Semiconductor
VSC7960RO 3.125Gb/s CML Limiting Amplifier with LOS Detect and Laser Driver with Automatic Power Control View Vitesse Semiconductor

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]