Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : OPA4188 OPA4188AID OPA4188AIDR OPA4188AIPW OPA4188AIPWR TI
Texas Instruments
Description : 0.03-μV/°C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift Operational Amplifiers View

Description
The OPA4188 Operational amplifier uses TI proprietary auto-zeroing techniques to provide low offset voltage (25 μV, maximum), and near Zero-Drift over time and temperature. These miniature, high precision, low quiescent current Amplifiers offer high input impedance and Rail-to-Rail output swing within 15 mV of the rails, making them ideal for industrial applications. The input common-mode range includes the negative rail. Either single or dual supplies can be used in the range of 4 V to 36 V (±2 V to ±18 V).
The quad version is available in 14-pin SOIC and 14-pin TSSOP packages. All versions are specified for operation from –40°C to +125°C.

Features
• Low Offset Voltage: 25 μV (Maximum)
Zero-Drift: 0.03 μV/°C
• Low Noise: 8.8 nV/√Hz
   0.1-Hz to 10-Hz Noise: 0.25 µVPP
• Excellent DC Precision:
   PSRR: 142 dB
   CMRR: 146 dB
   Open-Loop Gain: 136 dB
• Gain Bandwidth: 2 MHz
• Quiescent Current: 475 μA (Maximum)
• Wide Supply Range: ±2 V to ±18 V
Rail-to-Rail Output:
   Input Includes Negative Rail
• RFI Filtered Inputs
• MicroSIZE Packages

Applications
• Bridge Amplifiers
• Strain Gauges
• Test Equipment
• Transducer Applications
• Temperature Measurement
• Electronic Scales
• Medical Instrumentation
• Resistance Temperature Detectors
• Precision Active Filters

Part Name(s) : OPA180 OPA2180 OPA4180 OPA180ID OPA180IDBVR OPA180IDBVT OPA180IDGKR OPA180IDGKT OPA180IDR OPA2180ID TI
Texas Instruments
Description : 0.1-μV/°C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift Operational Amplifiers View

Description
The OPA180, OPA2180, and OPA4180 Operational Amplifiers use Zero-Drift techniques to simultaneously provide low offset voltage (75 μV), and near Zero-Drift over time and temperature. These miniature, high-precision, low quiescent current Amplifiers offer high input impedance and Rail-to-Rail output swing within 18 mV of the rails. The input common-mode range includes the negative rail. Either single or dual supplies can be used in the range of 4.0 V to 36 V (±2 V to ±18 V).
The dual version is offered in VSSOP-8 and SOIC-8 packages. The quad is offered in SOIC-14 and TSSOP-14 packages. All versions are specified for operation from –40°C to 105°C.

Features
• Low Offset Voltage: 75 μV (max)
Zero-Drift: 0.1 μV/°C
• Low Noise: 10 nV/√Hz
• Very Low 1 / f Noise
• Excellent DC Precision:
   – PSRR: 126 dB
   – CMRR: 114 dB
   – Open-Loop Gain (AOL): 120 dB
• Quiescent Current: 525 μA (max)
• Wide Supply Range: ±2 V to ±18 V
Rail-to-Rail Output:
   Input Includes Negative Rail
• Low Bias Current: 250 pA (typ)
• RFI Filtered Inputs
• MicroSIZE Packages

Applications
• Bridge Amplifiers
• Strain Gauges
• Test Equipment
• Transducer Applications
• Temperature Measurement
• Electronic Scales
• Medical Instrumentation
• Resister Thermal Detectors
• Precision Active Filters

Part Name(s) : AD8571ARM ADI
Analog Devices
Description : Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifiers View

GENERAL DESCRIPTION
This new family of Amplifiers has ultralow offset, drift and bias current. The AD8571, AD8572 and AD8574 are single, dual and quad Amplifiers featuring Rail-to-Rail input and output swings. All are guaranteed to operate from 2.7 V to 5 V single supply.
The AD857x family provides the benefits previously found only in expensive autozeroing or chopper-stabilized Amplifiers. Using Analog Devices’ new topology these new Zero-Drift Amplifiers combine low cost with high accuracy. (No external capacitors are required.) In addition, using a patented spread-spectrum autozero technique, the AD857x family virtually eliminates the intermodulation effects from interaction of the chopping function with the signal frequency in ac applications.

FEATURES
   Low Offset Voltage: 1 mV
   Input Offset Drift: 0.005 mV/8C
   Rail-to-Rail Input and Output Swing
   5 V/2.7 V Single-Supply Operation
   High Gain, CMRR, PSRR: 130 dB
   Ultralow Input Bias Current: 20 pA
   Low Supply Current: 750 mA/Op Amp
   Overload Recovery Time: 50 ms
   No External Capacitors Required
  
APPLICATIONS
   Temperature Sensors
   Pressure Sensors
   Precision Current Sensing
   Strain Gage Amplifiers
   Medical Instrumentation
   Thermocouple Amplifiers

Part Name(s) : AD8571ARMZ AD8574ARZ ADI
Analog Devices
Description : Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifiers View

GENERAL DESCRIPTION
This family of Amplifiers has ultralow offset, Drift, and bias current. The AD8571, AD8572, and AD8574 are single, dual, and quad Amplifiers, respectively, featuring Rail-to-Rail input and output swings. All are guaranteed to operate from 2.7 V to 5 V single supply.
The AD857x family provides benefits previously found only in expensive auto-zeroing or chopper-stabilized Amplifiers. Using Analog Devices, Inc., topology, these Zero-Drift Amplifiers combine low cost with high accuracy. (No external capacitors are required.) Using a patented spread-spectrum, auto-zero technique, the AD857x family eliminates the intermodulation effects from interaction of the chopping function with the signal frequency in ac applications.

FEATURES
   Low offset voltage: 1 μV
   Input offset drift: 0.005 μV/°C
   Rail-to-Rail input and output swing
   5 V/2.7 V single-supply operation
   High gain: 145 dB typical
   CMRR: 140 dB typical
   PSRR: 130 dB typical
   Ultralow input bias current: 10 pA typical
   Low supply current: 750 μA per op amp
   Overload recovery time: 50 μs
   No external capacitors required
  
APPLICATIONS
   Temperature sensors
   Pressure sensors
   Precision current sensing
   Strain gage Amplifiers
   Medical instrumentation
   Thermocouple Amplifiers


Part Name(s) : LTC1152 LTC1152C LTC1152CN8 LTC1152CS8 LTC1152I LTC1152IN8 LTC1152IS8 Linear
Linear Technology
Description : Rail-to-Rail Input Rail-to-Rail Output Zero-Drift Op Amp View

DESCRIPTION

The LTC®1152 is a high performance, low power Zero-Drift op amp featuring an input stage that common modes to both power supply rails and an output stage that provides Rail-to-Rail swing, even into heavy loads. The wide input common-mode range is achieved with a high frequency on-board charge pump. This technique eliminates the crossover distortion and limited CMRR imposed by competing technologies. The LTC1152 is a C-LoadTM of amp, enabling it to drive any capacitive load.



FEATURES

■ Input Common-Mode Range Includes Both Rails

■ Output Swings Rail to Rail

■ Output Will Drive 1kΩ Load

■ No External Components Required

■ Input Offset Voltage: 10µV Max

■ Input Offset Drift: 100nV/°C Max

■ Minimum CMRR: 115dB

■ Supply Current: 3.0mA Max

■ Shutdown Pin Drops Supply Current to 5µA Max

■ Output Configurable to Drive Any Capacitive Load

■ Operates from 2.7V to 14V Total Supply Voltage



APPLICATIONS

Rail-to-Rail Amplifiers and Buffers

■ High Resolution Data Acquisition Systems

■ Supply Current Sensing in Either Rail

■ Low Supply Voltage Transducer Amplifiers

■ High Accuracy Instrumentation

■ Single Negative Supply Operation



 


Part Name(s) : OPA172 OPA2172 OPA4172 OPA172ID OPA172IDBVR OPA172IDBVT OPA172IDCKR OPA172IDCKT OPA172IDR OPA2172ID TI
Texas Instruments
Description : 36-V, Single-Supply, 10-MHz, Rail-to-Rail Output Operational Amplifiers View

Description
The OPA172, OPA2172 and OPA4172 (OPAx172) are a family of 36-V, single-supply, low-noise Operational Amplifiers capable of operating on supplies ranging from +4.5 V (±2.25 V) to +36 V (±18 V). This latest addition of high-voltage CMOS Operational Amplifiers, in conjunction with the OPAx171 and OPAx170, provide a family of bandwidth, noise, and power options to meet the needs of a wide variety of applications. The OPAx172 are available in micropackages, and offer low offset, Drift, and quiescent current. These devices also offer wide bandwidth, fast slew rate, and high output current drive capability. The single, dual, and quad versions all have identical specifications for maximum design flexibility.
Unlike most op amps, which are specified at only one supply voltage, the OPAx172 family is specified from +4.5 V to +36 V. Input signals beyond the supply rails do not cause phase reversal. The input can operate 100 mV below the negative rail and within 2 V of the top rail during normal operation. Note that these devices can operate with full Rail-to-Rail input 100 mV beyond the top rail, but with reduced performance within 2 V of the top rail.
The OPAx172 series of op amps are specified from –40°C to +125°C.

Features
• Wide Supply Range:
   +4.5 V to +36 V, ±2.25 V to ±18 V
• Low Offset Voltage: ±0.2 mV
• Low Offset Drift: ±0.3 µV/°C
• Gain Bandwidth: 10 MHz
• Low Input Bias Current: ±8 pA
• Low Quiescent Current: 1.6 mA per Amplifier
• Low Noise: 7 nV/√Hz
• EMI and RFI Filtered Inputs
• Input Range Includes the Negative Supply
• Input Range Operates to Positive Supply
Rail-to-Rail Output
• High Common-Mode Rejection: 120 dB
• Industry-Standard Packages:
   – SOIC-8, VSSOP-8, SOIC-14, TSSOP-14
• microPackages: Single in SC70, SOT-23,
   Dual in WSON-8

Applications
• Tracking Amplifier in Power Modules
• Merchant Power Supplies
• Transducer Amplifiers
• Bridge Amplifiers
• Temperature Measurements
• Strain Gauge Amplifiers
• Precision Integrators
• Test Equipment

Part Name(s) : TLV2460Y TLV2461Y TLV2462Y TLV2463Y TLV2464Y TLV2465Y TLV2464CNR TLV2464INR TI
Texas Instruments
Description : FAMILY OF LOW-POWER Rail-to-Rail INPUT/OUTPUT Operational Amplifiers WITH SHUTDOWN View

description
The TLV246x is a family of low-power Rail-to-Rail input/output Operational Amplifiers specifically designed for portable applications. The input common-mode voltage range extends beyond the supply rails for maximum dynamic range in low-voltage systems. The amplifier output has Rail-to-Rail performance with high-output-drive capability, solving one of the limitations of older Rail-to-Rail input/output Operational Amplifiers. This Rail-to-Rail dynamic range and high output drive make the TLV246x ideal for buffering analog-to-digital converters.

● Input Common-Mode Range Exceeds Both Supply Rails . . . – 0.2V to VDD+ + 0.2V
● Gain Bandwidth Product . . . 6.4MHz
● Supply Current . . . 500µA/channel
● Input Offset Voltage . . . 100 µV
● Input Noise Voltage . . . 11nV/√Hz
Rail-to-Rail Output Swing
● Slew Rate . . . 1.6 V/µs
● ±90mA Output Drive Capability
● Micropower Shutdown Mode (TLV2460/3/5) . . . 0.3 µA/channel
● Available in 5- or 6-pin SOT23 and 8- or 10-Pin MSOP
● Characterized From TA = –40°C to 125°C
● Universal Op Amp EVM

Part Name(s) : TLV2460A-Q1 TLV2460AQDRQ1 TLV2460AQPWRQ1 TLV2460QDRQ1 TLV2460QPWRQ1 TLV2461A-Q1 TLV2461AQDRQ1 TLV2461AQPWRQ1 TLV2461QDRQ1 TLV2461QPWRQ1 TI
Texas Instruments
Description : FAMILY OF LOW-POWER Rail-to-Rail INPUT/OUTPUT Operational Amplifiers WITH SHUTDOWN View

description

The TLV246x is a family of low-power Rail-to-Rail input/output Operational Amplifiers specifically designed for portable applications. The input common-mode voltage range extends beyond the supply rails for maximum dynamic range in low-voltage systems. The amplifier output has Rail-to-Rail performance with high-output-drive capability, solving one of the limitations of older Rail-to-Rail input/output Operational Amplifiers. This Rail-to-Rail dynamic range and high output drive make the TLV246x ideal for buffering analog-to-digital converters.



 


Part Name(s) : LMV821 LMV821SQ3T2G LMV822 LMV822DMR2G LMV822DR2G LMV824 LMV824DR2G LMV824DTBR2G ON-Semiconductor
ON Semiconductor
Description : Single, Dual, Quad Low Voltage, Rail-to-Rail Operational Amplifiers View

The LMV821, LMV822, and LMV824 are Operational Amplifiers with low input voltage offset and drift vs. temperature. In spite of low quiescent current requirements these devices have 5 MHz bandwidth and 1.4 V/μs slew rate. In addition they provide rail−to−rail output swing into 600 Ω loads. The input common−mode voltage range includes ground, and the maximum input offset voltage is only 3.5 mV. Substantially large capacitive loads can be driven by simply adding a pullup resistor or isolation resistor.



Features

• Low Offset Voltage: 3.5 mV

• Very low Offset Drift: 1.0 μV/°C

• High Bandwidth: 5 MHz

• Rail−to−Rail Output Swing into a 600 Ω load

• Capable of driving highly capacitive loads

• These Devices are Pb−Free and are RoHS Compliant



Typical Applications

• Notebook Computers

• PDAs

• Modem Transmitter/ Receivers



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]