Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Part name(s)'  

P/N + Description + Content Search

Search Word's :

Part name(s)' : VSC7281
Description : Dual XAUI – Single XGMII Quad 0.95 Gbps to 3.25 Gbps Transceiver
Vitesse
Vitesse Semiconductor

GENERAL DESCRIPTION
The VSC7281 is a Dual XAUI – Single XGMII Transceiver tailored for 10 Gigabit Ethernet (10GbE) and 10 Gigabit Fibre Channel (10GFC) applications. The feature set and flexibility of these devices make them perfectly suited for Backplane and other Serial Interconnect applications such as Serial Rapid I/O, PCI Express and XAUI.
   
FEATURES
► IEEE802.3ae 10 Gigabit Ethernet Compliant
► ANSI 10Gb Fibre Channel Compliant
► Dual XAUI Serial Bus
Single XGMII Parallel Bus
► 0.95 Gbps to 3.25 Gbps Quad SerDes/Transceiver
► XAUI Compliant Retimer and Repeater Modes
► Simultaneous Operation at Multiple Frequencies
► Programmable Pre-Emphasis and Signal Equalization
► 8B/10B Encoder/Decoder with Optional Bypass
► Programmable Rate Matching Characters
► Elastic Buffer for Intra/Inter-Chip Deskewing and Channel-toChannel Alignment
► Received Data Aligned to Local REFCLK or to Recovered Clock
► TX and RX Rate Matching for FC, 1GbE, and InfiniBand™
► Output Reduced Swing Level for Optics
► Serial and Parallel Loopback
► Fast Locking CRU
► Flexible CMU Operation
► IEEE802.3 MDIO Register Interface
► Multiple Built-In-Self Test Diagnostics and Counters
    - PRBS, CRPAT, CJPAT Pattern Generation
► JTG Boundary Scan
► HSTL1.5 and HSTL1.8 Parallel I/O
   
APPLICATIONS
► 10 Gigabit Ethernet and Fibre Channel Links
    - XENPAK, X2, XPAK Module Connections
► High Speed Serial Backplanes
    - XAUI Channel
    - Independent Channel Control
► Box-to-Box Serial Communications
    - Copper, Coax, and Fiber
   

View
Part name(s)' : SPS-8340BG SPS-8340G
Description : 3.3V / 1550 nm / 4.25 Gbps LC SFP Single-Mode Transceiver
Optoway
Optoway Technology

DESCRIPTION

The SPS-8340G series Single Mode Transceiver is small form factor pluggable module for bi-directional serial optical dat a communicat ions such as 4x/2x/ 1x Fibre Channel and 1000BASE Ethernet . It is with t he SFP 20- pin connector to allow hot plug capability . This module is designed for Single Mode fiber and operates at a nominal wave length of 1550 nm. The transmitter secti on  uses  a 1550 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety  Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical  header and a limiting post-amplifier IC.



FEATURES

Up  to  4.25 Gbps Bi-directional Dat a Links

Hot-Pluggable SFP Footprint LC Optical Transceiver

Small Form-Factor Pl uggable(SFP) MSA compatible

Compliance with Fibre Channel FC-PI 400/ 200/ 100-SM-LC-L

1550 nm DFB LD Transmitter

18 dB Power Budget at Least

AC/AC Coupling according  to MSA

Up to  40 km Transmission

Single +3.3 V Power Supply

RoHS Compliant

0 to 70°C Operating : SPS-8340G

-10  to 85°C Operating : SPS-8340BG

Class  1 Laser International Safety  Standard IEC-60825 Compliant



 


View
Part name(s)' : SPS-73200WG
Description : 3.3V / 1550 nm / 1.25 Gbps Digital Diagnostic LC SFP Single-Mode Transceiver
Optoway
Optoway Technology

DESCRIPTION
The SPS-73200WG series Single Mode Transceivers is small form factor pluggable module for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability.

FEATURES
● Hot-Pluggable SFP Footprint LC Optical Transceiver
● Small Form-Factor Pluggable (SFP) MSA compatible
● Compliant with IEEE 802.3z Gigabit Ethernet
● Compliant with Fiber Channel 1X SM-LC-L FC-PI
● SFF-8472 Digital Diagnostic Function
● 1550 nm DFB LD Transmitter
● APD High Sensitivity Receiver
● 41 dB Power Budget at Least
● Distance up to 200 km
● AC/AC Coupling according to MSA
Single +3.3 V Power Supply
● RoHS Compliant
● 0 to 70oC Operation
● Class 1 Laser International Safety Standard IEC-60825 Compliant

APPLICATIONS
● Gigabit Ethernet Switches and Routers
● Fiber Channel Switch Infrastructure
● XDSL Applications
● Metro Edge Switching

View
Part name(s)' : VSC7280
Description : Dual XAUI – Dual XGMII Octal 0.95 Gbps to 3.25 Gbps Transceiver
Vitesse
Vitesse Semiconductor

GENERAL DESCRIPTION :
The VSC7280 is a Dual XAUI – Dual XGMII Transceivers tailored for 10 Gigabit Ethernet (10GbE) and 10 Gigabit Fibre Channel (10GFC) applications. The feature set and flexibility of these devices make them perfectly suited for Backplane and other Serial Interconnect applications such as Serial Rapid I/O, PCI Express and XAUI.
   
FEATURES
► IEEE802.3ae 10 Gigabit Ethernet Compliant
► ANSI 10Gb Fibre Channel Compliant
► Dual XAUI Serial Bus
► Dual XGMII Parallel Bus
► 0.95 Gbps to 3.25 Gbps Octal SerDes/Transceiver
► XAUI Compliant Retimer and Repeater Modes
► Simultaneous Operation at Multiple Frequencies
► Programmable Pre-Emphasis and Signal Equalization
► 8B/10B Encoder/Decoder with Optional Bypass
► Programmable Rate Matching Characters
► Elastic Buffer for Intra/Inter-Chip Deskewing and Channel-toChannel Alignment
► Received Data Aligned to Local REFCLK or to Recovered Clock
► TX and RX Rate Matching for XAUI, 1GbE, and InfiniBand™
► Output Reduced Swing Level for Optics
► Serial and Parallel Loopback
► Fast Locking CRU
► Flexible CMU Operation
► IEEE802.3 MDIO Register Interface
► Multiple Built-In-Self Test Diagnostics and Counters
    - PRBS, CRPAT, CJPAT Pattern Generation
► JTAG Boundary Scan
► HSTL1.5 and HSTL1.8 Parallel I/O
   
APPLICATIONS
► 10 Gigabit Ethernet and Fibre Channel Links
    - XENPAK, X2, XPAK Module Connections
► High Speed Serial Backplanes
    - XAUI Channel
    - Independent Channel Control
► Box-to-Box Serial Communications
    - Copper, Coax, and Fiber
   

View

Part name(s)' : PM8351
Description : 8-Channel 1.0-1.25 Gbps Transceiver
PMC-Sierra
PMC-Sierra

GENERAL DESCRIPTION

The OctalPHYTM is an octal PHYsical layer Transceiver ideal for systems requiring large numbers of point-to-point gigabit links. It provides eight individual serial channels capable of operation at up to 1.25 Gbps, which may be grouped together to form a Single 12.5 Gbps bidirectional link.

The OctalPHY includes 8B/10B block coding logic (compliant with 802.3z Gigabit Ethernet and FibreChannel requirements) which produces run length limited data streams for serial transmission.



FEATURES

• Eight independent 1.0-1.25 Gbit/s Transceivers

• Ultra low power operation: 1.25 Watts typical

• Integrated serializer/deserializer, clock synthesis, clock recovery, and 8B/10B encode/decode logic

• Physical Coding Sublayer (PCS) logic for Gigabit Ethernet

• Optional receive FIFO which synchronizes incoming data to local clock domain

• Dual Data Rate (DDR) parallel interface with clock forwarding to halve ASIC terminal count and simplify timing

• Extensive control of loopback, BIST, and operating Modes via 802.3 compliant MDC/MDIO serial interface

• Built-in packet generator/checker

• “Trunking” feature to de-skew and align received parallel data across eight channels

• IEEE 1149.1 JTAG testing support

• IEEE 802.3z Gigabit Ethernet and ANSI X3T11 FibreChannel support

• High speed outputs which feature programmable output current to directly drive dual-terminated line

• 2.5 V, 0.25 µ CMOS technology with 3.3V tolerant I/O

• Direct interface to optical modules, coax, or serial backplanes

• Small footprint 19x19 mm, 289-pin PBGA



APPLICATIONS

• High speed serial backplanes

• Gigabit Ethernet links

• FibreChannel links

• Intra-system interconnect

• ASIC to PMD link



 


View
Part name(s)' : SPS-73120AWG SPS-73120BWG SPS-73120WG
Description : 3.3V / 1550 nm / 1.25 Gbps Digital Diagnostic LC SFP Single-Mode Transceiver
Optoway
Optoway Technology

DESCRIPTION
The SPS-73120WG series Single Mode Transceivers is small form factor pluggable module for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability.

FEATURES
● Hot-Pluggable SFP Footprint LC Optical Transceiver
● Small Form-Factor Pluggable (SFP) MSA compatible
● Compliant with IEEE 802.3z Gigabit Ethernet
● SFF-8472 Digital Diagnostic Function
● 1550 nm DFB LD Transmitter
● APD High Sensitivity Receiver
● 32 dB Power Budget at Least
● Distance up to 120 km
● AC/AC Coupling according to MSA
Single +3.3 V Power Supply
● RoHS Compliant
● 0 to 70°C Operation: SPS-73120WG
● -10 to 85°C Operation: SPS-73120BWG
● -40 to 85°C Operation: SPS-73120AWG
● Class 1 Laser International Safety Standard IEC-60825 Compliant

APPLICATIONS
● Gigabit Ethernet Switches and Routers
● Fiber Channel Switch Infrastructure
● XDSL Applications
● Metro Edge Switching

View
Part name(s)' : SPS-7380AWG SPS-7380BWG SPS-7380WG
Description : 3.3V / 1550 nm / 1.25 Gbps Digital Diagnostic LC SFP Single-Mode Transceiver
Optoway
Optoway Technology

DESCRIPTION

The SPS-7380WG series Single Mode Transceivers is small form factor pluggable module for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fibre Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for Single Mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.



FEATURES

• Hot-Pluggable SFP Footprint LC Optical Transceiver

• Small Form-Factor Pluggable (SFP) MSA compatible

• Compliant with IEEE 802.3z 1000BASE-ZX

• Compliant with Fibre Channel 1x SM-LC-L FC-PI

• SFF-8472 Digital Diagnostic Function

• AC/AC Coupling according to MSA

• 1550 nm DFB LD Transmitter

• Distance up to 80 km

Single +3.3 V Power Supply

• RoHS Compliant

• 0 to 70oC Operation: SPS-7380WG

• -10 to 85oC Operation: SPS-7380BWG

• -40 to 85oC Operation: SPS-7380AWG

• Class 1 Laser International Safety Standard IEC-60825 Compliant



APPLICATIONS

• Gigabit Ethernet Switches and Routers

• Fibre Channel Switch Infrastructure

• XDSL Applications

• Metro Edge Switching



 


View
Part name(s)' : SPS-73160AWG SPS-73160BWG SPS-73160WG
Description : 3.3V / 1550 nm / 1.25 Gbps Digital Diagnostic LC SFP Single-Mode Transceiver
Optoway
Optoway Technology

DESCRIPTION

The SPS-73160WG series Single Mode Transceivers is small form factor pluggable module for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for Single Mode fiber and operates at a nominal wavelength of 1550 nm. A guaranteed minimum optical link budget of 37 dB is offered which can correspond to a link distance of over 160 km (assuming worst case fiber loss of 0.22 dB/km). The transmitter section uses a multiple quantum well 1550 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs Avalanche photodetector preamplifier mounted in an optical header and a limiting post-amplifier IC.



FEATURES

• Hot-Pluggable SFP Footprint LC Optical Transceiver

• Small Form-Factor Pluggable (SFP) MSA compatible

• Compliant with IEEE 802.3z Gigabit Ethernet

• Compliant with Fiber Channel 1X SM-LC-L FC-PI

• SFF-8472 Digital Diagnostic Function

• 1550 nm DFB LD Transmitter

• APD High Sensitivity Receiver

• 37 dB Power Budget at Least

• Distance up to 160 km

• AC/AC Coupling according to MSA

Single +3.3 V Power Supply

• RoHS Compliant

• 0 to 70oC Operation: SPS-73160WG

• -10 to 85oC Operation: SPS-73160BWG

• -40 to 85oC Operation: SPS-73160AWG

• Class 1 Laser International Safety Standard IEC-60825 Compliant



APPLICATIONS

• Gigabit Ethernet Switches and Routers

• Fiber Channel Switch Infrastructure

• XDSL Applications

• Metro Edge Switching



 


View
Part name(s)' : SPS-7380AG SPS-7380BG SPS-7380G
Description : 3.3V / 1550 nm / 1.25 Gbps LC SFP Single-Mode Transceiver
Optoway
Optoway Technology

DESCRIPTION

The  SPS- 7380G  series  Single  Mode  Transceivers  is  small form  factor  pluggable  module  for  bi-directional   serial optical  data  communications  such  as  Gigabit  Ethernet 1000BASE-ZX  and  Fibre  Channel 1x  SM-LC-L   FC-PI.  It  is with  the SFP 20- pin connector to allow hot  plug capability.



FEATURES

l  Hot-Pl uggabl e SFP Foot pri nt  LC Opti cal Transceiver

l  Small Form-Factor Pluggable (SFP) MSA  compatible

l  Compl iant with IEEE  802. 3z 1000BASE-ZX

l  Compl iant with  Fibre Channel  1x  SM-LC-L FC-PI

l  AC/AC Coupling  according t o MSA

l  1550 nm DFB LD Transmi tter

l  Di stance  up to 80  km

l  Si ngle +3. 3 V Power Supply

l  RoHS Compl iant

l  0 t o  70oC Operation: SPS-7380G

l  -10 t o  85oC Operation: SPS-7380BG

l  -40 t o  85oC Operation: SPS-7380AG

l  Cl ass 1 Laser Internati onal  Safet y  Standard IEC-60825 Compl iant



APPLICATIONS

l  Gi gabi t Ethernet Switches  and Routers

l  Fi bre Channel Switch Inf rastructure

l  XDSL Applicat ions

l  Metro Edge Switchi ng


View
12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]