Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : LC75810E LC75810T ON-Semiconductor
ON Semiconductor
Description : 1/8 to 1/10 Duty Dot Matrix LCD Display Controllers/Drivers View

Overview
The LC75810E and LC75810T are 1/8 to 1/10 Duty Dot Matrix LCD Display Controllers/Drivers that support the Display of characters, numbers, and symbols. In addition to generating Dot Matrix LCD drive signals based on data transferred serially from a microcontroller, the LC75810E and LC75810T also provide on-chip character Display ROM and RAM to allow Display systems to be implemented easily.

Features
• Controls and drives a 5 × 7, 5 × 8, or 5 × 9 Dot Matrix LCD.
• Supports accessory Display segment drive (up to 80 segments)
Display technique:
    1/8-Duty, 1/4-bias drive (5 × 7 Dots, 6 × 7 Dots)
    1/9-Duty, 1/4-bias drive (5 × 8 Dots, 6 × 8 Dots)
    1/10-Duty, 1/4-bias drive (5 × 9 Dots, 6 × 9 Dots)
Display digits:
    16 digits × 1 line (5 × 7 Dots),
    15 digits × 1 line (5 × 8 or 5 × 9 Dots)
    13 digits × 1 line (6 × 7, 6 × 8, or 6 × 9 Dots)
Display control memory
    CGROM: 240 characters (5 × 7, 5 × 8, or 5 × 9 Dots)
    CGRAM: 16 characters (5 × 7, 5 × 8, or 5 × 9 Dots)
    DCRAM: 64 × 8 bits
    ALATCH: 80 bits
• Instruction function Display on/off control Smooth up, down, left, and right scrolling of the Display
• Provides a backup function based on power saving mode
• The frame frequency of the common and segment output waveforms can be controlled by instructions.
• Built-in Display contrast adjustment circuit
• Serial data input supports CCB format communication with the system controller
• Independent LCD driver block power supply VLCD
• Provides a RES pin for IC internal initialization.
• RC oscillator circuit

Part Name(s) : LC75810E LC75810T SANYO
SANYO -> Panasonic
Description : 1/8 to 1/10 Duty Dot Matrix LCD Display Controllers/Drivers View

Overview
The LC75810E and LC75810T are 1/8 to 1/10 Duty Dot Matrix LCD Display Controllers/Drivers that support the Display of characters, numbers, and symbols. In addition to generating Dot Matrix LCD drive signals based on data transferred serially from a microcontroller, the LC75810E and LC75810T also provide on-chip character Display ROM and RAM to allow Display systems to be implemented easily.

Features
• Controls and drives a 5 × 7, 5 × 8, or 5 × 9 Dot Matrix LCD.
• Supports accessory Display segment drive (up to 80 segments)
Display technique:
    1/8-Duty, 1/4-bias drive (5 × 7 Dots, 6 × 7 Dots)
    1/9-Duty, 1/4-bias drive (5 × 8 Dots, 6 × 8 Dots)
    1/10-Duty, 1/4-bias drive (5 × 9 Dots, 6 × 9 Dots)
Display digits:
    16 digits × 1 line (5 × 7 Dots),
    15 digits × 1 line (5 × 8 or 5 × 9 Dots)
    13 digits × 1 line (6 × 7, 6 × 8, or 6 × 9 Dots)
Display control memory
    CGROM: 240 characters (5 × 7, 5 × 8, or 5 × 9 Dots)
    CGRAM: 16 characters (5 × 7, 5 × 8, or 5 × 9 Dots)
    DCRAM: 64 × 8 bits
    ALATCH: 80 bits
• Instruction function Display on/off control Smooth up, down, left, and right scrolling of the Display
• Provides a backup function based on power saving mode
• The frame frequency of the common and segment output waveforms can be controlled by instructions.
• Built-in Display contrast adjustment circuit
• Serial data input supports CCB format communication with the system controller
• Independent LCD driver block power supply VLCD
• Provides a RES pin for IC internal initialization.
• RC oscillator circuit

Part Name(s) : LC75817NE LC75817NW SANYO
SANYO -> Panasonic
Description : 1/8 to 1/10 Duty Dot Matrix LCD Display Controllers/Drivers with Key Input Function View

Overview
The LC75817NE and LC75817NW are 1/8 to 1/10 Duty Dot Matrix LCD Display Controllers/Drivers that support the Display of characters, numbers, and symbols. In addition to generating Dot Matrix LCD drive signals based on data transferred serially from a microcontroller, the LC75817NE and LC75817NW also provide on-chip character Display ROM and RAM to allow Display systems to be implemented easily. These products also provide up to 4 general-purpose output ports and incorporate a key scan circuit that accepts input from up to 30 keys to reduce printed circuit board wiring.

Features
• Key input function for up to 30 keys (A key scan is performed only when a key is pressed.)
• Controls and drives a 5 × 7, 5 × 8, or 5 × 9 Dot Matrix LCD.
• Supports accessory Display segment drive (up to 60 segments)
Display technique: 1/8 Duty 1/4 bias drive (5 × 7 Dots) 1/9 Duty 1/4 bias drive (5 × 8 Dots) 1/10 Duty 1/4 bias drive (5 × 9 Dots)
Display digits: 12 digits × 1 line (5 × 7 Dots, 5 × 8 Dots) 11 digits × 1 line (5 × 9 Dots)
Display control memory
    CGROM: 240 characters (5 × 7, 5 × 8, or 5 × 9 Dots)
    CGRAM: 16 characters (5 × 7, 5 × 8, or 5 × 9 Dots)
    ADRAM: 12 × 5 bits
    DCRAM: 48 × 8 bits
• Instruction function
    Display on/off control
    Display shift function
• Sleep mode can be used to reduce current drain.
• Built-in Display contrast adjustment circuit
• Up to 4 general-purpose output ports are included.
• Serial data I/O supports CCB format communication with the system controller.
• Independent LCD driver block power supply VLCD
• A voltage detection type reset circuit is provided to initialize the IC and prevent incorrect Display.
• The INH pin is provided. This pin turns off the Display, disables key scanning, and forces the general-purpose output ports to the low level.
• RC oscillator circuit

Part Name(s) : ML9040 ML9040-AXX ML9040-AXXGA ML9040-BXX ML9040-BXXGA OKI
Oki Electric Industry
Description : Dot Matrix LCD CONTROLLER WITH 16-Dot COMMON DRIVER AND 40-Dot SEGMENT DRIVER View

GENERAL DESCRIPTION

The ML9040-Axx/-Bxx is a Dot Matrix LCD controller which is fabricated in low power CMOS silicon gate technology.  Character Display on the Dot Matrix character type LCD can be controlled in combination with a 4-bit or 8-bit microcontroller.  This LSI consists of 16-Dot COMMON driver, 40-Dot SEGMENT driver, Display data RAM, character generator RAM, character generator ROM and control circuit.



FEATURES

• Easy interface with an 8-bit or 4-bit microcontroller.

Dot Matrix LCD controller/driver for lowercase (5 x 7 Dots) or uppercase (5 x 10 Dots).

• Automatic power ON reset.

• COMMON signal drivers (16) and SEGMENT signal drivers (40).

• Can control up to 80 characters when used in combination with MSM5259.

• Character generator ROM for 160 characters with lowercase (5 x 7 Dots) and 32 characters with

uppercase (5 x 10 Dots).

• Character patterns are programmable by character generator RAM.  (Lowercase:  5 x 8 Dots, 8 patterns, uppercase:  5 x 11 Dots, 4 patterns).

• Built-in oscillation circuit to connect with external resistor or ceralock.

1/8 Duty (1 line; 5 x 7 Dots + cursor), 1/11 Duty (1 line; 5 x 10 Dots + cursor), or 1/16 Duty (2

lines; 5 x 7 Dots + cursor), selectable.

• Clear Display even at 1/5 bias, 3.0V LCD driving voltage.

LCD driving waveform

   ML9040-Axx:  A mode

   ML9040-Bxx:  B mode

• Package options:

      80-pin plastic QFP (QFP80-P-1420-0.80-BK)

                               (Product name: ML9040-Axx/-BxxGA)

                                                                xx  indicates code number.



Part Name(s) : RA8808 Raio
RAIO
Description : 128 x 64 Driver for Dot Matrix LCD View

1. General Description

The RA8808 is a LCD driver LSI with 128(Segment) x 64(Common) driver output for Dot Matrix liquid crystal

graphic Display systems. This device consists of the Display RAM,128-bit segment drivers, 64-bit common

drivers and decoder logic. It has the internal Display RAM for storing the Display data transferred from an 8-

bit 8080/6800 micro controller or 3-wire-SPI/IIC controller and generates the Dot Matrix liquid crystal driving signals corresponding to stored data.



2. Features

Dot Matrix LCD segment driver with 128

  channel output, and common driver with 64 channel output.

Internal timing generator circuit for dynamic Display.

Selection of master/slave mode for combine two RA8808 controller to support 256x64 Dot Matrix.

Applicable LCD common Duty: 1/48, 1/64.

Support 6800/8080 8-bit parallel MPU interface.

Support 3-wires SPI and IIC serial MPU interface.

Two 512 bytes (4096-bits) Display RAM

LCD driving voltage: 8V ~17V

Built-in 2X~4X Voltage Booster and Voltage Follower

Power supply voltage: +2.7V ~ 5.5V

High voltage CMOS process

Bare gold bump chip available


Part Name(s) : MSM6222 MSM6222B MSM6222B-XX MSM6222B-XXGS-BL MSM6222B-XXGS-L OKI
Oki Electric Industry
Description : Dot Matrix LCD CONTROLLER WITH 16-Dot COMMON DRIVER AND 40-Dot SEGMENT DRIVER View

GENERAL DESCRIPTION

The MSM6222B-xx is a Dot Matrix LCD controller which is fabricated in low power CMOS silicon gate technology. Character Display on the Dot Matrix character type LCD can be controlled in combination with a 4-bit/8-bit microcontroller. This LSI consists of 16-Dot COMMON driver, 40-Dot SEGMENT driver, Display data RAM, character generator RAM, character generator ROM and control circuit.



FEATURES

• Easy interface with an 8-bit or 4-bit microcontroller.

Dot Matrix LCD controller/driver for lowercase (5 x 7 Dots) or uppercase (5 x 10 Dots).

• Automatic power ON reset.

• COMMON signal drivers (16) and SEGMENT signal drivers (40).

• Can control up to 80 characters when used in combination with MSM5259.

• Character generator ROM for 160 characters with lowercase (5 x 7 Dots) and 32 characters with uppercase (5 x 10 Dots).

• Character patterns are programmable by character generator RAM. (Lowercase: 5 x 8 Dots, 8 kinds, uppercase: 5 x 11 Dots, 4 kinds).

• Oscillation circuit for external resistor or ceralock.

1/8 Duty (1 line; 5 x 7 Dots + cursor), 1/11 Duty (1 line; 5 x 10 Dots + cursor), or 1/16 Duty (2 lines; 5 x 7 Dots + cursor), selectable.

• Clear Display even at 1/5 bias, 3.0V LCD driving voltage.

• Package options:

   80-pin plastic QFP (QFP80-P-1420-0.80-L) (Product name: MSM6222B-xxGS-L)

   80-pin plastic QFP (QFP80-P-1420-0.80-BL) (Product name: MSM6222B-xxGS-BL)

                                                                 xx indicates code number.



 


Part Name(s) : ML9040A ML9040A-AXX ML9040A-AXXGA ML9040A-AXXWA ML9040A-BXX ML9040A-BXXGA ML9040A-BXXWA OKI
Oki Electric Industry
Description : Dot Matrix LCD CONTROLLER WITH 16-Dot COMMON DRIVER AND 40-Dot SEGMENT DRIVER View

GENERAL DESCRIPTION

The ML9040A-Axx/-Bxx is a Dot Matrix LCD controller which is fabricated in low power CMOS silicon gate technology.  Character Display on the Dot Matrix character type LCD can be controlled in combination with a 4-bit or 8-bit microcontroller.  This LSI consists of 16-Dot COMMON driver, 40-Dot SEGMENT driver, Display data RAM, character generator RAM, character generator ROM and control circuit.



FEATURES

• Easy interface with an 8-bit or 4-bit microcontroller.

Dot Matrix LCD controller/driver for lowercase (5 x 7 Dots) or uppercase (5 x 10 Dots).

• Automatic power ON reset.

• COMMON signal drivers (16) and SEGMENT signal drivers (40).

• Can control up to 80 characters when used in combination with MSM5259.

• Character generator ROM for 160 characters with lowercase (5 x 7 Dots) and 32 characters with

uppercase (5 x 10 Dots).

• Character patterns are programmable by character generator RAM.  (Lowercase:  5 x 8 Dots, 8 patterns, uppercase:  5 x 11 Dots, 4 patterns).

• Built-in oscillation circuit to connect with external resistor or ceralock.

1/8 Duty (1 line; 5 x 7 Dots + cursor), 1/11 Duty (1 line; 5 x 10 Dots + cursor), or 1/16 Duty (2

lines; 5 x 7 Dots + cursor), selectable.

• Clear Display even at 1/5 bias, 3.0V LCD driving voltage.

LCD driving waveform

  ML9040A-Axx:  A mode

  ML9040A-Bxx:  B mode

• Package options:

  80-pin plastic QFP(QFP80-P-1420-0.80-BK)(Product name: ML9040A-Axx/-BxxGA)

  Al pad chip                                        (Product name: ML9040A-Axx/-BxxWA)

                                                                     xx  indicates code number.

                                                                     01 indicates standard code number.


Part Name(s) : KS0107B KS0108B Samsung
Samsung
Description : 64CH SEGMENT DRIVER FOR Dot Matrix LCD View

INTRODUCTION

The KS0108B is a LCD driver LSl with 64 channel output for Dot Matrix liquid crystal graphic Display system. This device consists of the Display RAM, 64 bit data latch 64 bit drivers and decoder logics. It has the internal Display RAM for storing the Display data transferred from a 8 bit microcontroller and generates the Dot Matrix Iiquid crystal driving signals corresponding to stored data.The KS0108B composed of the liquid crystal Display system in combination with the KS0107B (64 common driver)



FEATURES

&midDot; Dot Matrix LCD segment driver with 64 channel output

&midDot; Input and Output signal

   - Input: 8 bit parallel Display data

      Control signal from MPU Splitted bias voltage (V1R, V1L, V2R, V2L, V3R. V3L, V4R, V4L)

   - Output: 64 channel waveform for LCD driving.

&midDot; Display data is stored in Display data RAM from MPU.

&midDot; Interface RAM

   - Capacity: 512 bytes (4096 bits)

   - RAM bit data: RAM bit data = 1:ON

                      RAM bit data- = 0:OFF

&midDot; Applicable LCD Duty: 1/32~1/64

&midDot; LCD driving voltage: 8V~17V(V DD-VEE)

&midDot; Power supply voltage: + 5V±10%

&midDot; High voltage CMOS process.

&midDot; 100QFP and bare chip available.



 


Part Name(s) : DM0811 DM0811-0S DM0811-0B DM0811-1S DM0811-1B SANYO
SANYO -> Panasonic
Description : LCD Dot Matrix Display Module View

LCD Dot Matrix Display Module

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]