Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
ADI
Analog Devices
Description : Low Noise, Low Drift Single-Supply OPERATIONAL AMPLIFIERS

GENERAL DESCRIPTION
The OP113 family of single supply OPERATIONAL AMPLIFIERS features both low noise and drift. It has been designed for systems with internal calibration. Often these processor-based systems are capable of calibrating corrections for offset and gain, but they cannot correct for temperature drifts and noise.
   
FEATURES
    Single- or Dual-Supply Operation
    Low Noise: 4.7 nV/√Hz @ 1 kHz
    Wide Bandwidth: 3.4 MHz
    Low Offset Voltage: 100 μV
    Very Low Drift: 0.2 μV/°C
    Unity Gain Stable
    No Phase Reversal
   
APPLICATIONS
    Digital Scales
    Multimedia
    Strain Gages
    Battery Powered Instrumentation
    Temperature Transducer Amplifier
   

Intersil
Intersil
Description : 0.5MHz, Low Supply Voltage, Low Input Current BiMOS OPERATIONAL AMPLIFIERS

0.5MHz, Low Supply Voltage, Low Input Current BiMOS OPERATIONAL AMPLIFIERS



The CA3420A and CA3420 are integrated circuit OPERATIONAL AMPLIFIERS that combine PMOS transistors and bipolar transistors on a single monolithic chip. The CA3420A and CA3420 BiMOS OPERATIONAL AMPLIFIERS feature gate protected PMOS transistors in the input circuit to provide very high input impedance, very low input currents (less than 1pA).



Features

• 2V Supply at 300µA Supply Current

• 1pA Input Current (Typ) (Essentially Constant to 85oC)

• Rail-to-Rail Output Swing (Drive±2mA into 1kΩLoad)

• Pin Compatible with 741 OPERATIONAL AMPLIFIERS



Applications

• pH Probe AMPLIFIERS

• Picoammeters

• Electrometer (High Z) Instruments

• Portable Equipment

• Inaccessible Field Equipment

• Battery-Dependent Equipment (Medical and Military)


Description : LOW NOISE, JFET INPUT OPERATIONAL AMPLIFIERS

Low Noise, JFET Input OPERATIONAL AMPLIFIERS

These low noise JFET input OPERATIONAL AMPLIFIERS combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated OPERATIONAL amplifier has well matched high voltage JFET input device for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents. Moreover, the devices exhibit low noise and low harmonic distortion, making them ideal for use in high fidelity audio amplifier applications.
These devices are available in single, dual and quad OPERATIONAL AMPLIFIERS which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.

• Low Input Noise Voltage: 18 nV/√Hz Typ
• Low Harmonic Distortion: 0.01% Typ
• Low Input Bias and Offset Currents
• High Input Impedance: 10 12 Ω Typ
• High Slew Rate: 13 V/µs Typ
• Wide Gain Bandwidth: 4.0 MHz Typ
• Low Supply Current: 1.4 mA per Amp

Mitsubishi
MITSUBISHI ELECTRIC
Description : DUAL LOW-NOISE J-FET INPUT OPERATIONAL AMPLIFIERS

DUAL LOW-NOISE J-FET INPUT OPERATIONAL AMPLIFIERS

Part Name(s) : M5219FP M5219L M5219P
Mitsumi
Mitsumi
Description : DUAL LOW-NOISE OPERATIONAL AMPLIFIERS(DUAL POWER SUPPLY TYPE)

DUAL LOW-NOISE OPERATIONAL AMPLIFIERS(DUAL POWER SUPPLY TYPE)


Part Name(s) : M5220FP M5220L M5220P
Mitsumi
Mitsumi
Description : DUAL LOW-NOISE OPERATIONAL AMPLIFIERS(DUAL POWER SUPPLY TYPE)

DUAL LOW-NOISE OPERATIONAL AMPLIFIERS(DUAL POWER SUPPLY TYPE)


Description : Low Noise, JFET Input OPERATIONAL AMPLIFIERS

These low noise JFET input OPERATIONAL AMPLIFIERS combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated OPERATIONAL amplifier has well matched high voltage JFET input device for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents. Moreover, the devices exhibit low noise and low harmonic distortion, making them ideal for use in high fidelity audio amplifier applications.
These devices are available in single, dual and quad OPERATIONAL AMPLIFIERS which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.

• Low Input Noise Voltage: 18 nV/√Hz Typ
• Low Harmonic Distortion: 0.01% Typ
• Low Input Bias and Offset Currents
• High Input Impedance: 10 12 Ω Typ
• High Slew Rate: 13 V/µs Typ
• Wide Gain Bandwidth: 4.0 MHz Typ
• Low Supply Current: 1.4 mA per Amp

Part Name(s) : AN6555 AN6556 AN6556S
ETC
Unspecified
Description : Low Noise Dual OPERATIONAL AMPLIFIERS

[Panasonic]

■ Overview
The AN6555, the AN6556, and the AN6556S are low noise, high slew rate dual OPERATIONAL AMPLIFIERS with phase compensation circuits built-in.
They are suitable for applications to various electronic circuits such as active filters and audio preAMPLIFIERS.

■ Features
• Phase compensation circuit
• High voltage gain:Gv=100 dB typ.
• Low noise:input referred noise voltage Vni=1.5µ Vrms typ.
• High slew rate:SR=2V/µ s typ.
• Output short-circuit protection

Part Name(s) : AN6555 AN6556 AN6556S
Panasonic
Panasonic Corporation
Description : Low Noise Dual OPERATIONAL AMPLIFIERS

■ Overview
The AN6555, the AN6556, and the AN6556S are low noise, high slew rate dual OPERATIONAL AMPLIFIERS with phase compensation circuits built-in.
They are suitable for applications to various electronic circuits such as active filters and audio preAMPLIFIERS.

■ Features
• Phase compensation circuit
• High voltage gain:Gv=100 dB typ.
• Low noise:input referred noise voltage Vni=1.5µ Vrms typ.
• High slew rate:SR=2V/µ s typ.
• Output short-circuit protection

Description : Low Power, Low Noise OPERATIONAL AMPLIFIERS

The MC33178/9 series is a family of high quality monolithic AMPLIFIERS employing Bipolar technology with innovative high performance concepts for quality audio and data signal processing applications. This device family incorporates the use of high frequency PNP input transistors to produce AMPLIFIERS exhibiting low input offset voltage, noise and distortion. In addition, the amplifier provides high output current drive capability while consuming only 420A of drain current per amplifier. The NPN output stage used, exhibits no deadband crossover distortion, large output voltage swing, excellent phase and gain margins, low open−loop high frequency output impedance, symmetrical source and sink AC frequency performance.



Features

•600 Ω Output Drive Capability

•Large Output Voltage Swing

•Low Offset Voltage: 0.15 mV (Mean)

•Low T.C. of Input Offset Voltage: 2.0 V/°C

•Low Total Harmonic Distortion: 0.0024% (@ 1.0 kHz w/600Ω Load)

•High Gain Bandwidth: 5.0 MHz

•High Slew Rate: 2.0 V/s

•Dual Supply Operation: ±2.0 V to ±18 V

•ESD Clamps on the Inputs Increase Ruggedness without Affecting Device Performance

•Pb−Free Packages are Available


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]