FUNCTIONAL DESCRIPTION
The DDU224Fseries device is a 10TAP digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T10), shifted in time by an amount determined by the device dash number. The nominal taptotap DELAY increment is given by 1/10 of the dash number. For dash numbers less than 50, the total DELAY of the LINE is measured from T1 to T10, with the nominal value given by 9 times the increment. The inherent DELAY from IN to T1 is nominally 3.5ns. For dash numbers greater than or equal to 50, the total DELAY of the LINE is measured from IN to T10, with the nominal value given by the dash number.
FEATURES
• Ten equally spaced outputs
• Very narrow device (SIP package)
• Stackable for PC board economy
• Input & outputs fully TTL interfaced & buffered
• 10 T2L fanout capability
FUNCTIONAL DESCRIPTION
The DDU224Fseries device is a 10TAP digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T10), shifted in time by an amount determined by the device dash number. The nominal taptotap DELAY increment is given by 1/10 of the dash number. For dash numbers less than 50, the total DELAY of the LINE is measured from T1 to T10, with the nominal value given by 9 times the increment. The inherent DELAY from IN to T1 is nominally 3.5ns. For dash numbers greater than or equal to 50, the total DELAY of the LINE is measured from IN to T10, with the nominal value given by the dash number.
FEATURES
• Ten equally spaced outputs
• Very narrow device (SIP package)
• Stackable for PC board economy
• Input & outputs fully TTL interfaced & buffered
• 10 T2L fanout capability
FUNCTIONAL DESCRIPTION
The DDU222Fseries device is a 5tap digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T5), shifted in time by an amount given by the device dash number. For dash numbers less than 25, the total DELAY of the LINE is measured from T1 to T5, with the nominal value given by the dash number. The nominal taptotap DELAY increment is given by 1/4 of this number. The inherent DELAY from IN to T1 is nominally 3.5ns. For dash numbers greater than or equal to 25, the total DELAY of the LINE is measured from IN to T5, with the nominal value given by the dash number. The nominal taptotap DELAY increment is given by 1/5 of this number.
FEATURES
• Five equally spaced outputs
• Very narrow device (SIP package)
• Stackable for PC board economy
• Input & outputs fully TTL interfaced & buffered
• 10 T2L fanout capability
FUNCTIONAL DESCRIPTION
The DDU222Fseries device is a 5tap digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T5), shifted in time by an amount given by the device dash number. For dash numbers less than 25, the total DELAY of the LINE is measured from T1 to T5, with the nominal value given by the dash number. The nominal taptotap DELAY increment is given by 1/4 of this number. The inherent DELAY from IN to T1 is nominally 3.5ns. For dash numbers greater than or equal to 25, the total DELAY of the LINE is measured from IN to T5, with the nominal value given by the dash number. The nominal taptotap DELAY increment is given by 1/5 of this number.
FEATURES
• Five equally spaced outputs
• Very narrow device (SIP package)
• Stackable for PC board economy
• Input & outputs fully TTL interfaced & buffered
• 10 T2L fanout capability
FUNCTIONAL DESCRIPTION
The DDU7Fseries device is a 10TAP digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T10), shifted in time by an amount determined by the device dash number. The nominal taptotap DELAY increment is given by 1/10 of the dash number. For dash numbers less than 50, the total DELAY of the LINE is measured from T1 to T10, with the nominal value given by 9 times the increment. The inherent DELAY from IN to T1 is nominally 3.5ns. For
dash numbers greater than or equal to 50, the total DELAY of the LINE is measured from IN to T10, with the nominal value given by the dash number.
FEATURES
· Ten equally spaced outputs
· Fits standard 14pin DIP socket
· Low profile
· Autoinsertable
· Input & outputs fully TTL interfaced & buffered
· 10 T^{2}L fanout capability
FUNCTIONAL DESCRIPTION
The DDU7Cseries device is a 10TAP digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T10), shifted in time by an amount determined by the device dash number. The nominal taptotap DELAY increment is given by 1/10 of the dash number. For dash numbers less than 50, the total DELAY of the LINE is measured from T1 to T10, with the nominal value given by 9 times the increment. The inherent DELAY from IN to T1 is nominally 8.0ns. For dash numbers greater than or equal to 50, the total DELAY of the LINE is measured from IN to T10, with the nominal value given by the dash number.
FEATURES
• Ten equally spaced outputs
• Fits standard 16pin DIP socket
• Low profile
• Autoinsertable
• Input & outputs fully CMOS interfaced & buffered
• 10 T2L fanout capability
FUNCTIONAL DESCRIPTION
The DDU7Fseries device is a 10TAP digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T10), shifted in time by an amount determined by the device dash number. The nominal taptotap DELAY increment is given by 1/10 of the dash number. For dash numbers less than 50, the total DELAY of the LINE is measured from T1 to T10, with the nominal value given by 9 times the increment. The inherent DELAY from IN to T1 is nominally 3.5ns. For dash numbers greater than or equal to 50, the total DELAY of the LINE is measured from IN to T10, with the nominal value given by the dash number.
FEATURES
• Ten equally spaced outputs
• Fits standard 14pin DIP socket
• Low profile
• Autoinsertable
• Input & outputs fully TTL interfaced & buffered
• 10 T2L fanout capability
FUNCTIONAL DESCRIPTION
The SMD99Fseries device is a 5tap digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T5), shifted in time by an amount determined by the device dash number (See Table). For dash numbers less than 5025, the total DELAY of the LINE is measured from T1 to T5. The nominal taptotap DELAY increment is given by onefourth of the total DELAY, and the inherent DELAY from IN to T1 is nominally 3.5ns. For dash numbers greater than or equal to 5025, the total DELAY of the LINE is measured from IN to T5. The nominal taptotap DELAY increment is given by onefifth of this number.
FEATURES
• Five equally spaced outputs
• Designed for surface mounting
• Low profile (0.175 maximum height)
• Input & outputs fully TTL interfaced & buffered
• 10 T2L fanout capability
FUNCTIONAL DESCRIPTION
The DDU222Cseries device is a 5tap digitally buffered DELAY LINE. The signal input (IN) is reproduced at the outputs (T1T5), shifted in time by an amount given by the device dash number. For dash numbers less than 40, the total DELAY of the LINE is measured from T1 to T5, with the nominal value given by the dash number. The nominal taptotap DELAY increment is given by 1/4 of this number. The inherent DELAY from IN to T1 is nominally 8.0ns. For dash numbers greater than or equal to 40, the total DELAY of the LINE is measured from IN to T5, with the nominal value given by the dash number. The nominal taptotap DELAY increment is given by 1/5 of this number.
FEATURES
● Five equally spaced outputs
● Very narrow device (SIP package)
● Stackable for PC board economy
● Input & outputs fully CMOS interfaced & buffered
● 10 T2L fanout capability
FUNCTIONAL DESCRIPTION
The DDU222Cseries device is a 5tap digitally buffered delay LINE. The signal input (IN) is reproduced at the outputs (T1T5), shifted in time by an amount given by the device dash number. For dash numbers less than 40, the total delay of the LINE is measured from T1 to T5, with the nominal value given by the dash number. The nominal taptotap delay increment is given by 1/4 of this number. The inherent delay from IN to T1 is nominally 8.0ns. For dash numbers greater than or equal to 40, the total delay of the LINE is measured from IN to T5, with the nominal value given by the dash number. The nominal taptotap delay increment is given by 1/5 of this number.
FEATURES
• Five equally spaced outputs
• Very narrow device (SIP package)
• Stackable for PC board economy
• Input & outputs fully CMOS interfaced & buffered
• 10 T2L fanout capability
12345678910 Next 
