Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : FM93S46EM8 FM93S46EMT8 FM93S46EN FM93S46LEM8 FM93S46LEMT8 FM93S46LEN FM93S46LM8 FM93S46LMT8 FM93S46LN FM93S46LVM8 Fairchild
Fairchild Semiconductor
Description : (MICROWIREBus Interface) 1024-Bit Serial EEPROM with Data Protect and Sequential Read View

General Description

FM93CS46 is a 1024-Bit CMOS non-volatile EEPROM organized as 64 x 16-bit array. This device features MICROWIRE Interface which is a 4-wire Serial Bus with chipselect (CS), clock (SK), data input (DI) and data output (DO) signals. This Interface is compatible to many of standard Microcontrollers and Microprocessors.



Features

■Wide VCC2.7V - 5.5V

■Programmable write protection

■Sequential register read

■Typical active current of 200µA

  10µA standby current typical

  1µA standby current typical (L)

  0.1µA standby current typical (LZ)

■No Erase instruction required before Write instruction

■Self timed write cycle

■Device status during programming cycles

■40 year data retention

■Endurance: 1,000,000 data changes

■Packages available: 8-pin SO, 8-pin DIP, 8-pin TSSOP


Part Name(s) : INA2586 Integral
Integral Corp.
Description : 1024 x 8-Bit n-MOS EEPROM with I2C-Bus Interface View

The INA2586 is a 8-Kbit (1024 x 8-bit) n-MOS floating gate electrically erasable programmable read only memory (EEPROM). IC works in systems with Serial I2C-Bus. Up to two INA2586 devices may be connected to the I2C-Bus.The programming of the array is implemented by electron’s tunneling. The programming voltage is generated on-chip, using a voltage multiplier. Device is functionally identical to the SDA2586, Siemens. IC are made in 8-pin DIP and 8-pin SOP.

FEATURES
♦ Non-volatile storage of information during 10 years
♦ Single supply (Ucc=4,75 B - 5,25 B)
♦ On-chip voltage multiplier
♦ On-chip generator of bulk biasing
Serial input/output I2C-Bus
♦ 10 000 ERASE/WRITE cycles per byte;
♦ Internal reprogramming (no external components)
♦ Duration of the ERASE/WRITE cycle is 15 ms
♦ Temperature range: 0 ÷ +70°C

Part Name(s) : NM93CS66EM NM93CS66EM8X NM93CS66EMX NM93CS66LEM NM93CS66LEM8X NM93CS66LEMX NM93CS66LM NM93CS66LM8X NM93CS66LMX NM93CS66LZEM8X Fairchild
Fairchild Semiconductor
Description : (MICROWIRE Bus Interface) 4096-Bit Serial EEPROM with Data Protect and Sequential Read View

General Description
NM93CS66 is a 4096-bit CMOS non-volatile EEPROM organized as 256 x 16-bit array. This device features MICROWIRE Interface which is a 4-wire Serial Bus with chipselect (CS), clock (SK), data input (DI) and data output (DO) signals. This Interface is compatible to many of standard Microcontrollers and Microprocessors.

Features
■ Wide VCC 2.7V - 5.5V
■ Programmable write protection
■ Sequential register read
■ Typical active current of 200µA
    10µA standby current typical
    1µA standby current typical (L)
    0.1µA standby current typical (LZ)
■ No Erase instruction required before Write instruction
■ Self timed write cycle
■ Device status during programming cycles
■ 40 year data retention
■ Endurance: 1,000,000 data changes
■ Packages available: 8-pin SO, 8-pin DIP, 8-pin TSSOP

Part Name(s) : NM93C46 NM93C46E NM93C46EM8 NM93C46EMT8 NM93C46EN NM93C46LEM8 NM93C46LEMT8 NM93C46LEN NM93C46LM8 NM93C46LMT8 Fairchild
Fairchild Semiconductor
Description : 1024-Bit Serial CMOS EEPROM (MICROWIRE™ Synchronous Bus) View

General Description
NM93C46 is a 1024-Bit CMOS non-volatile EEPROM organized as 64 x 16-bit array. This device features MICROWIRE Interface which is a 4-wire Serial Bus with chipselect (CS), clock (SK), data input (DI) and data output (DO) signals. This Interface is compat ible to many of standard Microcontrollers and Microprocessors. There are 7 instructions implemented on the NM93C46 for various Read, Write, Erase, and Write Enable/Disable operations. This device is fabricated using Fairchild Semiconductor floating-gate CMOS process for high reliability, high endurance and low power consumption.
“LZ” and “L” versions of NM93C46 offer very low standby current making them suitable for low power applications. This device is offered in both SO and TSSOP packages for small space consid erations.

Features
■ Wide VCC 2.7V - 5.5V
■ Typical active current of 200µA
   10µA standby current typical
   1µA standby current typical (L)
   0.1µA standby current typical (LZ)
■ No Erase instruction required before Write instruction
■ Self timed write cycle
■ Device status during programming cycles
■ 40 year data retention
■ Endurance: 1,000,000 data changes
■ Packages available: 8-pin SO, 8-pin DIP, 8-pin TSSOP


Part Name(s) : NM93CS46 NM93CS46E NM93CS46EM8 NM93CS46EMT8 NM93CS46EN NM93CS46LEM8 NM93CS46LEMT8 NM93CS46LEN NM93CS46LM8 NM93CS46LMT8 Fairchild
Fairchild Semiconductor
Description : (MICROWIREBus Interface) 1024-Bit Serial EEPROM with Data Protect and Sequential Read View

General Description
NM93CS46 is a 1024-Bit CMOS non-volatile EEPROM organized as 64 x 16-bit array. This device features MICROWIRE Interface which is a 4-wire Serial Bus with chipselect (CS), clock (SK), data input (DI) and data output (DO) signals. This Interface is compatible to many of standard Microcontrollers and Microprocessors. NM93CS46 offers programmable write protection to the memory array using a special register called Protect Register. Selected memory locations can be protected against write by programming this Protect Register with the address of the first memory location to be protected (all locations greater than or equal to this first address are then protected from further change). Additionally, this address can be “permanently locked” into the device, making all future attempts to change data impossible. In addition this device features “sequential read”, by which, entire memory can be read in one cycle instead of multiple single byte read cycles. There are 10 instructions implemented on the NM93CS46, 5 of which are for memory operations and the remaining 5 are for Protect Register operations. This device is fabricated using Fairchild Semiconductor floating-gate CMOS process for high reliability, high endurance and low power consumption.
“LZ” and “L” versions of NM93CS46 offer very low standby current making them suitable for low power applications. This device is offered in both SO and TSSOP packages for small space considerations.

Features
■ Wide VCC 2.7V - 5.5V
■ Programmable write protection
■ Sequential register read
■ Typical active current of 200µA
   10µA standby current typical
   1µA standby current typical (L)
   0.1µA standby current typical (LZ)
■ No Erase instruction required before Write instruction
■ Self timed write cycle
■ Device status during programming cycles
■ 40 year data retention
■ Endurance: 1,000,000 data changes
■ Packages available: 8-pin SO, 8-pin DIP, 8-pin TSSOP

Part Name(s) : NM93C13 NM93C13M8 NM93C13N NM93C14 NM93C14M8 NM93C14N NM93C14TM8 National-Semiconductor
National ->Texas Instruments
Description : 256-/1024-Bit Serial EEPROM View

General Description
The NM93C13/C14 is 256/1024, respectively, bits of CMOS electrically erasable memory divided into 16/64 16-bit registers. They are fabricated using National Semiconductor’s floating-gate CMOS process for high speed, high reliability and low power. The NM93C13/C14 is available in an 8-pin SO package to save board space.
The Serial Interface of the NM93C13/C14 is MICROWIRE™ compatible for simple Interface to standard microcontrollers and microprocessors. There are 7 instructions: Read, Erase/Write Enable, Erase, Erase All, Write, Write All, and Erase/Write Disable.
All programming cycles are completely self-timed for simplified operation. The ready/Busy status is available on the DO pin to indicate the completion of a programming cycle.

Features
■ Typical active current 400 mA; Typical standby current 25 mA
■ Reliable CMOS floating gate technology
■ 4.5V to 5.5V operation in all modes
MICROWIRE compatible Serial I/O
■ Self-timed programming cycle
■ Device status indication during programming mode
■ 15 years data retention
■ Endurance: 100,000 read/write cycles minimum
■ Packages available: 8-pin DIP, 8-pin SO

Part Name(s) : 93C46 93C56 93C66 93C76 93C86 ST-Microelectronics
STMicroelectronics
Description : MICROWIRE Serial access EEPROM View

M93C86-x M93C76-x M93C66-x, M93C56-x M93C46-x



: 16-Kbit, 8-Kbit, 4-Kbit, 2-Kbit and 1-Kbit (8-bit or 16-bit wide) MICROWIRE Serial access EEPROM




Part Name(s) : FM93C66A FM93C66AE FM93C66AEM8 FM93C66AEMT8 FM93C66AL FM93C66AEN FM93C66ALEM8 FM93C66ALEMT8 FM93C66ALEN FM93C66ALM8 Fairchild
Fairchild Semiconductor
Description : 4K-Bit Serial CMOS EEPROM(MICROWIRE™ Synchronous Bus) View

General Description

FM93C66A is a 4096-bit CMOS non-volatile EEPROM organized as 256 x 16-bit array. This device features MICROWIRE Interface which is a 4-wire Serial Bus with chipselect (CS), clock (SK), data input (DI) and data output (DO) signals. This Interface is compat ible to many of standard Microcontrollers and Microprocessors.



Features

■ Wide VCC2.7V - 5.5V

■ User selectable organization

    x16 (ORG = 1)

    x8 (ORG = 0)

■ Typical active current of 200µA

    10µA standby current typical

    1µA standby current typical (L)

    0.1µA standby current typical (LZ)

■ No Erase instruction required before Write instruction

■ Self timed write cycle

■ Device status during programming cycles

■ 40 year data retention

■ Endurance: 1,000,000 data changes

■ Packages available: 8-pin SO, 8-pin DIP, 8-pin TSSOP


Part Name(s) : FM93C56 FM93C56E FM93C56EM8 FM93C56EMT8 FM93C56EN FM93C56LEM8 FM93C56LEMT8 FM93C56LEN FM93C56LM8 FM93C56LMT8 Fairchild
Fairchild Semiconductor
Description : (MICROWIREBus Interface) 2048-Bit Serial EEPROM with Data Protect and Sequential Read View

General Description

FM93CS56 is a 2048-bit CMOS non-volatile EEPROM organized as 128 x 16-bit array. This device features MICROWIRE Interface which is a 4-wire Serial Bus with chipselect (CS), clock (SK), data input (DI) and data output (DO) signals. This Interface is compatible to many of standard Microcontrollers and Microprocessors.



Features

■Wide VCC2.7V - 5.5V

■Programmable write protection

■Sequential register read

■Typical active current of 200µA

10µA standby current typical

1µA standby current typical (L)

0.1µA standby current typical (LZ)

■No Erase instruction required before Write instruction

■Self timed write cycle

■Device status during programming cycles

■40 year data retention

■Endurance: 1,000,000 data changes

■Packages available: 8-pin SO, 8-pin DIP, 8-pin TSSOP


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]