Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : DAC5675 DAC5675IPHP DAC5675I TI
Texas Instruments
Description : 14-BIT, 400-MSPS DIGITAL-TO-ANALOG CONVERTER View

DESCRIPTION
The DAC5675 is a 14-bit resolution high-speed DIGITAL-TO-ANALOG CONVERTER. The DAC5675 is designed for high-speed digital data transmission in wired and wireless communication systems, high-frequency direct-digital synthesis (DDS), and waveform reconstruction in test and measurement applications. The DAC5675 has excellent spurious free dynamic range (SFDR) at high intermediate frequencies, which makes the DAC5675 well suited for multicarrier transmission in TDMA and CDMA based cellular base transceiver stations BTS.

FEATURES
400-MSPS Update Rate
● LVDS-Compatible Input Interface
● Spurious Free Dynamic Range (SFDR) to Nyquist
    − 69 dBc at 70-MHz IF, 400 MSPS
● W-CDMA Adjacent Channel Power Ratio ACPR
    − 73 dBc at 30.72-MHz IF, 122.88 MSPS
    − 71 dBc at 61.44-MHz IF, 245.76 MSPS
● Differential Scalable Current Outputs: 2 mA to 20 mA
● On-Chip 1.2-V Reference
● Single 3.3-V Supply Operation
● Power Dissipation: 820 at fclk = 400 MSPS, fout = 70 MHz
● Package: 48-Pin HTQFP PowerPad, TJA = 28.8°C/W

APPLICATIONS
● Cellular Base Transceiver Station Transmit Channel
    − CDMA: WCDMA, CDMA2000, IS−95
    − TDMA: GSM, IS−136, EDGE/GPRS
    − Supports Single-Carrier and Multicarrier Applications
● Test and Measurement: Arbitrary Waveform Generation
● Direct Digital Synthesis (DDS)
● Cable Modem Headend

Part Name(s) : 5962-0720401VXC 5962-0720402VXC DAC5675A-SP DAC5675AHFG/EM DAC5675AWHFG-V DAC5675AMHFG-V TI
Texas Instruments
Description : Radiation-Tolerant, 14-BIT, 400-MSPS DIGITAL-TO-ANALOG CONVERTER View

Description
The DAC5675A-SP is a radiation-tolerant, 14-bit resolution high-speed DIGITAL-TO-ANALOG CONVERTER (DAC) primarily suited for space satellite applications. The DAC5675A-SP is designed for high-speed digital data transmission in wired and wireless communication systems, high-frequency direct digital synthesis (DDS), and waveform reconstruction in test and measurement applications. The DAC5675A-SP has excellent SFDR at high intermediate frequencies, which makes it well suited for multicarrier transmission in TDMA and CDMA based cellular base transceiver stations (BTSs).

Features
• QMLV (QML Class V) MIL-PRF-38535 Qualified, SMD 5962-07204
    – 5962-0720401VXC – Qualified over the Military Temperature Range (–55°C to 125°C)
    – 5962-0720402VXC – Qualified over Reduced Temperature Range (–55°C to 115°C) for Improved Dynamic Performance
• High-Performance 52-Pin Ceramic Quad Flat Pack (HFG)
400-MSPS Update Rate
• LVDS-Compatible Input Interface
• Spurious-Free Dynamic Range (SFDR) to Nyquist
    – 69 dBc at 70 MHz IF, 400 MSPS
• W-CDMA Adjacent Channel Power Ratio (ACPR)
    – 73 dBc at 30.72 MHz IF, 122.88 MSPS
    – 71 dBc at 61.44 MHz IF, 245.76 MSPS
• Differential Scalable Current Outputs: 2 to 20 mA
• On-Chip 1.2-V Reference
• Single 3.3-V Supply Operation
• Power Dissipation: 660 mW at ƒCLK = 400 MSPS, ƒOUT = 20 MHz

Applications
• Radiation Hardened Digital to Analog (DAC) Applications
• Space Satellite RF Data Transmission
• Cellular Base Transceiver Station Transmit Channel:
    – CDMA: WCDMA, CDMA2000, IS-95
    – TDMA: GSM, IS-136, EDGE/GPRS
    – Supports Single-Carrier and Multicarrier Applications
• Engineering Evaluation (/EM) Samples are Available (1)

Part Name(s) : DAC3174 DAC3174I DAC3174IRGC25 DAC3174IRGCR DAC3174IRGCT Texas-Instruments
Texas Instruments
Description : Dual 14-bit 500 MSPS Digital to Analog CONVERTER View

DESCRIPTION
The DAC3174 is a dual channel 14-BIT, 500 MSPS DIGITAL-TO-ANALOG CONVERTER (DAC). The DAC3174 uses a 14-bit wide LVDS digital bus with 1 or 2 independent data clocks for flexibility in providing each channel’s data from different data sources. An input FIFO allows independent data and sample clocks. FIFO input and output pointers can be synchronized across multiple devices for precise signal synchronization. The DAC outputs are current sourcing and terminate to GND with a compliance range of –0.5 to 1V. DAC3174 is pin compatible with the dual-channel, 12-/10-bit, 500 MSPS DIGITAL-TO-ANALOG CONVERTER DAC3164/DAC3154 and single channel, 14-/12-/10-bit, 500 MSPS DIGITAL-TO-ANALOG CONVERTER DAC3171/DAC3161/DAC3151.
The device is available in a QFN-64 PowerPAD™ package is specified over the full industrial temperature range (–40°C to 85°C).

FEATURES
• Dual Channel
• 14-Bit Resolution
• Maximum Sample Rate: 500 MSPS
• Pin Compatible with DAC3154/DAC3164 and
   DAC3151/DAC3161/DAC3171
• Input Interface:
   – 14 LVDS Inputs
   – Single 14-bit wide interface
      or Dual 7-bit wide interface
   – Single or dual DDR data clock
   – Internal FIFO
• Chip to Chip Synchronization
• Power Dissipation: 460mW
• Spectral Performance at 20 MHz IF
   – SNR: 76 dBFS
   – SFDR: 78 dBc
• Current sourcing DACs
• Compliance Range: –0.5V to 1V
• Package: 64 pin QFN (9x9mm)

APPLICATIONS
• Multi-carrier, Multi-mode Cellular Infrastructure
   Base Stations
• Radar
• Signal Intelligence
• Software-defined Radio
• Test and Measurement Instrumentation

Part Name(s) : DAC5675-EP DAC5675MPHPEP DAC5675MPHPREP V62/05619-01XE V62/05619-02XE DC5675MEP TI
Texas Instruments
Description : 14-Bit 400-MSPS DIGITAL-TO-ANALOG CONVERTER View

DESCRIPTION/ORDERING INFORMATION
The DAC5675 is a 14-bit resolution high-speed DIGITAL-TO-ANALOG CONVERTER (DAC). The DAC5675 is designed for high-speed digital data transmission in wired and wireless communication systems, high-frequency direct-digital synthesis (DDS), and waveform reconstruction in test and measurement applications. The DAC5675 has excellent spurious-free dynamic range (SFDR) at high intermediate frequencies, which makes it well-suited for multicarrier transmission in TDMA- and CDMA-based cellular base transceiver stations (BTSs).

FEATURES
400-MSPS Update Rate
• Controlled Baseline
    – One Assembly
    – One Test Site
    – One Fabrication Site
• Extended Temperature Performance of –55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• LVDS-Compatible Input Interface
• Spurious-Free Dynamic Range (SFDR) to Nyquist
    – 69 dBc at 70 MHz IF, 400 MSPS
• W-CDMA Adjacent Channel Power Ratio (ACPR)
    – 73 dBc at 30.72-MHz IF, 122.88 MSPS
    – 71 dBc at 61.44-MHz IF, 245.76 MSPS
• Differential Scalable Current Outputs: 2 mA to 20 mA
• On-Chip 1.2-V Reference
• Single 3.3-V Supply Operation
• Power Dissipation: 660 mW at fCLK = 400 MSPS, fOUT = 20 MHz
• Package: 48-Pin PowerPAD™ Thermally-Enhanced Thin Quad Flat Pack (HTQFP) TJA = 29.1°C/W

APPLICATIONS
• Cellular Base Transceiver Station Transmit Channel:
    – CDMA: WCDMA, CDMA2000, IS-95
    – TDMA: GSM, IS-136, EDGE/GPRS
    – Supports Single-Carrier and Multicarrier Applications
• Test and Measurement: Arbitrary Waveform Generation
• Military Communications


Part Name(s) : AD9102 AD9102-EBZ AD9102BCPZ AD9102BCPZRL7 ADI
Analog Devices
Description : Low Power, 14-BIT, 180 MSPS, DIGITAL-TO-ANALOG CONVERTER and Waveform Generator View

GENERAL DESCRIPTION

The AD9102 TxDAC® and waveform generator is a high performance DIGITAL-TO-ANALOG CONVERTER (DAC) integrating on-chip pattern memory for complex waveform generation with a direct digital synthesizer (DDS). The DDS is a 14-bit output, up to 180 MSPS master clock sine wave generator with a 24-bit tuning word, allowing 10.8 Hz/LSB frequency resolution.



FEATURES

On-chip 4096 × 14-bit pattern memory

On-chip DDS

Power dissipation @ 3.3 V, 4 mA output

  96.54 mW @ 180 MSPS

Sleep mode: <5 mW @ 3.3 V

Supply voltage: 1.8 V to 3.3 V

SFDR to Nyquist

  87 dBc @ 10 MHz output

Phase noise @ 1 kHz offset, 180 MSPS, 8 mA: −150 dBc/Hz

Differential current outputs: 8 mA max @ 3.3 V

Small footprint, 32-lead, 5 mm × 5 mm LFCSP with 3.6 mm × 3.6 mm exposed paddle, and Pb-free  package



APPLICATIONS

Medical instrumentation

Portable instrumentation

  Signal generators, arbitrary waveform generators

Automotive radar


Part Name(s) : XRD6418 XRD6418BIQ Exar
Exar Corporation
Description : CMOS 10-Bit, 6 MSPS, High Speed Analog-to-Digital CONVERTER with 8:1 Input Analog Multiplexer View

CMOS 10-Bit, 6 MSPS, High Speed Analog-to-Digital CONVERTER with 8:1 Input Analog Multiplexer

Part Name(s) : DAC5675A DAC5675AI DAC5675AIPHP TI
Texas Instruments
Description : 14-BIT, 400-MSPS DIGITAL-TO-ANALOG CONVERTER View

Description
The DAC5675A is a 14-bit resolution high-speed DIGITAL-TO-ANALOG CONVERTER. The DAC5675A is designed for high-speed digital data transmission in wired and wireless communication systems, highfrequency direct-digital synthesis (DDS), and waveform reconstruction in test and measurement applications. The DAC5675A has excellent spuriousfree dynamic range (SFDR) at high intermediate frequencies, which makes the DAC5675A well-suited for multicarrier transmission in TDMA- and CDMA-based cellular base transceiver stations (BTSs).

Features
• 400MSPS Update Rate
• LVDS-Compatible Input Interface
• Spurious-Free Dynamic Range (SFDR) to Nyquist:
    – 69dBc at 70MHz IF, 400MSPS
• W-CDMA Adjacent Channel Power Ratio (ACPR):
    – 73dBc at 30.72MHz IF, 122.88MSPS
    – 71dBc at 61.44MHz IF, 245.76MSPS
• Differential Scalable Current Sink Outputs: 2mA to 20mA
• On-Chip 1.2V Reference
• Single 3.3V Supply Operation
• Power Dissipation: 660mW at fCLK = 400MSPS, fOUT = 20MHz
• Package: 48-Pin HTQFP PowerPad™, TJA = 28.8°C/W

Applications
• Cellular Base Transceiver Station Transmit Channel:
    – CDMA: WCDMA, CDMA2000, IS-95
    – TDMA: GSM, IS-136, EDGE/GPRS
    – Supports Single-Carrier and Multicarrier Applications
• Test and Measurement: Arbitrary Waveform Generation
• Direct Digital Synthesis (DDS)
• Cable Modem Headend

Part Name(s) : DAC5674 DAC5674IPHP DAC5674IPHPG4 DAC5674IPHPR TI
Texas Instruments
Description : 14-BIT, 40 MSPS, 2x/4x INTERPOLATING CommsDAC DIGITAL-TO-ANALOG CONVERTER View

DESCRIPTION
The DAC5674 is a 14-bit resolution, high-speed, DIGITAL-TO-ANALOG CONVERTER (DAC) with integrated 4× interpolation filter, onboard clock multiplier, and on-chip voltage reference. The device has been designed for high-speed digital data transmission in wired and wireless communication systems, high-frequency direct-digital synthesis (DDS) and waveform reconstruction in test and measurement applications.

FEATURES
● 200-MSPS Maximum Input Data Rate
400-MSPS Maximum Update Rate DAC
● 76-dBc SFDR Over Full First Nyquist Zone With Single Tone Input Signal (Fout = 21 MHz)
● 74-dBc ACPR W-CDMA at 15.36 MHz IF
● 69-dBc ACPR W-CDMA at 30.72 MHz IF
● Selectable 2 or 4 Interpolation Filter
    − Linear Phase
    − 0.05-dB Pass-Band Ripple
    − 80-dB Stop-Band Attenuation
    − Stop-Band Transition 0.4−0.6 Fdata
    − Interpolation Filters Configurable in Either Low-Pass or High-Pass Mode, Allows For Selection High-Order Images
● On-Chip 2/4 PLL Clock Multiplier, PLL Bypass Mode
● Differential Scalable Current Outputs: 2 mA to 20 mA
● On-Chip 1.2-V Reference
● 1.8-V Digital and 3.3-V Analog Supply Operation
● 1.8/3.3-V CMOS Compatible Interface
● Power Dissipation: 435 mW at 400 MSPS
● Package: 48-Pin TQFP

APPLICATIONS
● Cellular Base Transceiver Station Transmit Channel
    − CDMA: W-CDMA, CDMA2000, IS-95
    − TDMA: GSM, IS-136, EDGE/UWC-136
● Test and Measurement: Arbitrary Waveform Generation
● Direct Digital Synthesis (DDS)
● Cable Modem Termination System

Part Name(s) : AD9952 AD9952/PCB AD9952YSV AD9952YSV-REEL7 AD9952PCB ADI
Analog Devices
Description : 400 MSPS 14-BIT, 1.8 V CMOS Direct Digital Synthesizer View

GENERAL DESCRIPTION
The AD9952 is a direct digital synthesizer (DDS) featuring a 14-bit DAC operating up to 400 MSPS. The AD9952 uses advanced DDS technology, coupled with an internal high speed, high performance DAC to form a digitally programmable, complete high frequency synthesizer capable of generating a frequency-agile analog output sinusoidal waveform at up to 200 MHz. The AD9952 is designed to provide fast frequency hopping and fine tuning resolution (32-bit frequency tuning word). The frequency tuning and control words are loaded into the AD9952 via a serial I/O port.
The AD9952 is specified to operate over the extended industrial temperature range of –40°C to +105°C.

FEATURES
  400 MSPS internal clock speed
  Integrated 14-bit DAC
  32-bit tuning word
  Phase noise ≤ –120 dBc/Hz @ 1 kHz offset (DAC output)
  Excellent dynamic performance
     >80 dB SFDR @ 160 MHz (±100 kHz offset) AOUT
  Serial I/O control
  1.8 V power supply
  Software and hardware controlled power-down
  48-lead TQFP/EP package
  Support for 5 V input levels on most digital inputs
  PLL REFCLK multiplier (4× to 20×)
  Internal oscillator, can be driven by a single crystal
  Phase modulation capability
  Multichip synchronization
  High speed comparator (200 MHz toggle rate)

APPLICATIONS
  Agile LO frequency synthesis
  Programmable clock generators
  Test and measurement equipment
  Acousto-optic device drivers

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]