Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : 1N5907_03 1N5908_03 1N5907TR_03 1N5908TR_03 Microsemi
Microsemi Corporation
Description : 1500 WATT LOW VOLTAGE TRANSIENT VOLTAGE SUPPRESSOR View

DESCRIPTION
This pair of unidirectional LOW VOLTAGE TRANSIENT VOLTAGE SUPPRESSOR (TVS) devices for the 1N5907 and 1N5908 JEDEC registrations with different packages have the same high Peak Pulse Power rating of 1500 W with extremely fast response times. The 1N5907 is available in a military qualified version as described in the Features section herein. They are most often used for protecting against TRANSIENTs from inductive switching environments, induced RF effects, or induced secondary lightning effects as found in surge levels of IEC61000-4-5 described herein. They are also very successful in protecting airborne avionics and electrical systems when LOW VOLTAGE is required. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.

FEATURES
• Unidirectional TVS series for thru-hole mounting
• Suppresses TRANSIENTs up to 1500 WATTs @ 10/1000 µs (Figure 1)
   in less than 100 pico seconds
LOW working VOLTAGE (VWM) of 5 V
• Hermetic sealed DO-13 metal package for 1N5907 and plastic
   “Case 1” for 1N5908
• JAN/TX/TXV military qualification available for 1N5907 per MIL
   PRF-19500/500 by adding JAN, JANTX, or JANTXV prefix, e.g.
   JANTXV1N5907
• Surface mount equivalent packages also available as SMCJ5.0
   or SMCG5.0 in separate data sheet (consult factory for other
   surface mount options)

APPLICATIONS / BENEFITS  
• Protection from switching TRANSIENTs and induced RF
• Protects TTL, ECL, DTL, MOS, MSI, and other
   integrated circuits requiring 5.0 V or LOWer power
   supplies
• Protection from ESD and EFT per IEC 61000-4-2 and
   IEC 61000-4-4
• Secondary lightning protection per IEC61000-4-5 with
   42 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with
   12 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with
   2 Ohms source impedance: Class 2 & 3
• 1N5907 Inherently radiation hard as described in
   Microsemi MicroNote 050

Part Name(s) : 1N5907 1N5907TR 1N5908 1N5908TR JAN1N5907 JAN1N5908 JANTX1N5907 JANTX1N5908 JANTXV1N5907 JANTXV1N5908 Microsemi
Microsemi Corporation
Description : 1500 WATT LOW VOLTAGE TRANSIENT VOLTAGE SUPPRESSOR View

DESCRIPTION
This pair of unidirectional LOW VOLTAGE TRANSIENT VOLTAGE SUPPRESSOR (TVS) devices for the 1N5907 and 1N5908 JEDEC registrations with different packages have the same high Peak Pulse Power rating of 1500 W with extremely fast response times. The 1N5907 is available in a military qualified version as described in the Features section herein. They are most often used for protecting against TRANSIENTs from inductive switching environments, induced RF effects, or induced secondary lightning effects as found in surge levels of IEC61000-4-5 described herein. They are also very successful in protecting airborne avionics and electrical systems when LOW VOLTAGE is required. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. Both hermetic seal and molded types are available.

FEATURES
• Unidirectional TVS series for thru-hole mounting
• Suppresses TRANSIENTs up to 1500 WATTs @ 10/1000 µs (Figure 1) in less than 100 pico seconds
LOW working VOLTAGE (VWM) of 5 V
• Hermetic sealed DO-13 metal package for 1N5907 and plastic “Case 1” for 1N5908
• JAN/TX/TXV military qualification available for 1N5907 per MILPRF-19500/500 by adding JAN, JANTX, or JANTXV prefix, e.g. JANTXV1N5907
• Surface mount equivalent packages also available as SMCJ5.0 or SMCG5.0 in separate data sheet (consult factory for other surface mount options)

APPLICATIONS / BENEFITS
• Protection from switching TRANSIENTs and induced RF
• Protects TTL, ECL, DTL, MOS, MSI, and other integrated circuits requiring 5.0 V or LOWer power supplies
• Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4
• Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2 & 3
• 1N5907 Inherently radiation hard as described in Microsemi MicroNote 050

Part Name(s) : LC7 LC7A LC8 LC8A LC9 LC9A Microsemi
Microsemi Corporation
Description : LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR (TVS) - 1500W View

Description
This hermetically sealed TRANSIENT VOLTAGE SUPPRESSOR (TVS) product family includes a rectifier diode element in series and opposite direction to achieve LOW CAPACITANCE performance beLOW 100 pF (see Figure 2). The LOW level of TVS CAPACITANCE may be used for protecting higher frequency applications in inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. With virtually instantaneous response, they also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar TRANSIENT capability is required

Part Name(s) : HSMBJSAC10 HSMBJSAC12 HSMBJSAC15 HSMBJSAC18 HSMBJSAC22 HSMBJSAC26 HSMBJSAC36 HSMBJSAC45 HSMBJSAC5.0 HSMBJSAC50 Microsemi
Microsemi Corporation
Description : 500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR View

DESCRIPTION

The HSMBJSAC TRANSIENT VOLTAGE SUPPRESSOR (TVS) series rated at 500 WATTs provides an added rectifier element as shown in Figure 4 to achieve LOW CAPACITANCE in applications for data or signal lines. The LOW CAPACITANCE rating of less than 30 pF may be used for protecting higher frequency applications in inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. If bidirectional protection is needed, two HSMBJSAC devices in anti-parallel configuration are required as shown in Figure 6. With their very fast response time, they also provide ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4 respectively.



FEATURES

• Unidirectional LOW-CAPACITANCE TVS series (for bidirectional see Figure 6)

• Suppresses TRANSIENT up to 500 WATTs Peak Pulse Power @ 10/1000 µs

• Improved performance in LOW CAPACITANCE of 30 pF

• Economical small plastic surface mount with robust axial subassembly package

• Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are also available by adding MQ, MX, MV, or MSP prefixes respectively to part number, e.g. MXSAC5.0, MVSAC18, etc.

• Also available in surface mount with SMAJ prefix for part numbers (ex. SMAJSAC5.0)

• UL94V-0 Flammability Classification



Part Name(s) : PJDLC03 PJDLC05 PJDLC12 PJDLC24 PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES View

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 3.3 to 24 Volts 400 WATTs



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to prodect sensitive equipment againset electrostatic discharge events as well to offer a minmum lnsertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applicatons. This dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-23, offering borard space reduction, where the application requires it.



FEATURES

• Maximum CAPACITANCE @ 0 Vdc Bias of 1.2 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• In compliance with EU RoHS 2002/95/EC directives


Part Name(s) : PJDLC05C-02 PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES View

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 5.0 Volts 200 WATTs



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to protect sensitive equipment against electrostatic discharge events as well to offer a minimum insertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applications. This

dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-23, offering board space reduction, where the application requires it.

This device comes with two pairs of high speed switching diodes connected in series, where both pairs are electrically isolated, offering a very LOW CAPACITANCE, minimizing the insertion losses in data transmission lines.



FEATURES

• Maximum CAPACITANCE @ 0 Vdc Bias of 1.0 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• In compliance with EU RoHS 2002/95/EC directives


Part Name(s) : PJDLC05C-05 PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES View

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 5.0 Volts 400 WATTs



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to protect sensitive equipment against electrostatic discharge events as well to offer a minimum insertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applications. This

dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-23, offering board space reduction, where the application requires it.

This device comes with two pairs of high speed switching diodes connected in series, where both pairs are electrically isolated, offering a very LOW CAPACITANCE, minimizing the insertion losses in data transmission lines.



FEATURES

• Maximum CAPACITANCE @ 0 Vdc Bias of 1.0 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• In compliance with EU RoHS 2002/95/EC directives


Part Name(s) : PJDLC05C-03 PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES View

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 5.0 Volts 250 WATTs



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to protect sensitive equipment against electrostatic discharge events as well to offer a minimum insertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applications. This

dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-23, offering board space reduction, where the application requires it. This device comes with two pairs of high speed switching diodes

connected in series, where both pairs are electrically isolated, offering a very LOW CAPACITANCE, minimizing the insertion losses in data transmission lines.



FEATURES

• Maximum CAPACITANCE @ 0 Vdc Bias of 1.0 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• In compliance with EU RoHS 2002/95/EC directives

 


Part Name(s) : PJDLC05W PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES View

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 5 Volts 120 WATTs



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to prodect sensitive equipment againset electrostatic discharge events as well to offer a minmum lnsertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applicatons. This dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-323, offering borard space reduction, where the application requires it.



FEATURES

• Improved leakage current, maximum of 20 µA @ 5Vdc

• Maximum CAPACITANCE @ 0 Vdc Bias of 1.2 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• IEC61000-4-5 lightning 5 Amps peak, 8x20 usec waveform

• In compliance with EU RoHS 2002/95/EC directives


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]