Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Part name(s)'  

P/N + Description + Content Search

Search Word's :

Part name(s)' : 74ALVC162834A 74ALVC162834ADGG
Description : 18-bit registered driver with inverted register enable and 30termination resistors; 3-state
NXP
NXP Semiconductors.

General description
The 74ALVC162834A is an 18-bit registered driver.
   
Features and benefits
• Wide supply voltage range from 1.2 V to 3.6 V
• CMOS low-power consumption
• Direct interface with TTL levels (2.7 V to 3.6 V)
• Current drive ± 12 mA at 3.0 V
• MULTIBYTE flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins for minimum noise and ground bounce
• Output drive capability 50 Ω transmission lines at 85°C
• Integrated 30 Ω termination resistors
• Diode clamps to VCC and GND on all inputs
• Input diodes to accommodate strong drivers
• Complies with JEDEC standard no. 8-1A
   

View
Part name(s)' : 74ALVC162334A 74ALVC162334ADGG 74ALVC162334ADGG5 74ALVC162334ADGG,5 74ALVC162334ADGG1 74ALVC162334ADGG,1
Description : 16-bit registered driver with inverted register enable and 30termination resistors (3-state)
NXP
NXP Semiconductors.

General description
The 74ALVC162334A is a 16-bit universal bus driver.
   
Features
■ Wide supply voltage range of 1.2 V to 3.6 V
■ Complies with JEDEC standard 8-1A
■ CMOS low power consumption
■ Direct interface with TTL levels
■ Current drive: ±24 mA at 3.0 V
■ MULTIBYTE flow-through standard pinout architecture
■ Low inductance multiple VCC and GND pins
    for minimum noise and ground bounce
■ Output drive capability 50 Ω transmission lines at 85 °C
■ Integrated 30termination resistors
■ Input diodes to accommodate strong drivers
   

View
Part name(s)' : 74ALVC162334A 74ALVC162334ADGG
Description : 16-bit registered driver with inverted register enable and 30termination resistors (3-State)
Philips
Philips Electronics

DESCRIPTION
The 74ALVC162334A is an 16-bit universal bus driver.
   
FEATURES
• Wide supply voltage range of 1.2 V to 3.6 V
• Complies with JEDEC standard no. 8-1A.
• CMOS low power consumption
• Direct interface with TTL levels
• Current drive ± 24 mA at 3.0 V
• MULTIBYTETM flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins for minimum noise
    and ground bounce
• Output drive capability 50 Ω transmission lines @ 85°C
• Current drive ±24 mA at 3.0 V
• Integrated 30termination resistors
• Input diodes to accommodate strong drivers
   

View
Part name(s)' : 74ALVC162834A 74ALVC162834ADGG AC162834ADGG
Description : 18-bit registered driver with inverted register enable and 30termination resistors (3-State)
Philips
Philips Electronics

DESCRIPTION
The 74ALVC162834A is an 18-bit registered driver.
   
FEATURES
• Wide supply voltage range of 1.2 V to 3.6 V
• Complies with JEDEC standard no. 8-1A.
• CMOS low power consumption
• Direct interface with TTL levels
• Current drive ± 12 mA at 3.0 V
• MULTIBYTETM flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins for minimum noise
    and ground bounce
• Output drive capability 50 Ω transmission lines @ 85°C
• Integrated 30 Ω termination resistors
• Diode clamps to VCC and GND on all inputs
• Input diodes to accommodate strong drivers
   

View

Part name(s)' : 74AVC16834 74AVC16834DGG
Description : 18-bit registered driver with inverted register enable (3-State)
Philips
Philips Electronics

DESCRIPTION
The 74AVC16834 is a 18-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP).
This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor (Live Insertion).
A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient. See the graphs on page 8 for typical curves.

FEATURES
• Wide supply voltage range of 1.2 V to 3.6 V
• Complies with JEDEC standard no. 8-1A/5/7.
• CMOS low power consumption
• Input/output tolerant up to 3.6 V
• DCO (Dynamic Controlled Output) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
• Low inductance multiple VCC and GND pins for minimum noise and ground bounce
• Power off disables 74AVC16834 outputs, permitting Live Insertion

View
Part name(s)' : 74ALVC16834ADGG 74ALVC16834A
Description : 18-bit registered driver with inverted register enable (3-State)
Philips
Philips Electronics

DESCRIPTION
The 74ALVC16834A is an 18-bit registered driver.
   
FEATURES
• Wide supply voltage range of 1.2 V to 3.6 V
• Complies with JEDEC standard no. 8-1A.
• CMOS low power consumption
• Direct interface with TTL levels
• Current drive ± 24 mA at 3.0 V
• MULTIBYTETM flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins for minimum noise
    and ground bounce
• Output drive capability 50 Ω transmission lines @ 85°C
• Input diodes to accommodate strong drivers
   

View
Part name(s)' : 74ALVC16834A 74ALVC16834ADGG
Description : 18-bit registered driver with inverted register enable; 3-state
NXP
NXP Semiconductors.

General description
The 74ALVC16834A is an 18-bit registered driver.
   
Features and benefits
• Wide supply voltage range from 1.2 V to 3.6 V
• CMOS low-power consumption
• Direct interface with TTL levels (2.7 V to 3.6 V)
• Current drive ± 24 mA at VCC = 3.0 V
• MULTIBYTE flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins
    for minimum noise and ground bounce
• Output drive capability 50 Ω transmission lines at 85°C
• Input diodes to accommodate strong drivers
• Complies with JEDEC standards:
    – JESD8-5 (2.3 V to 2.7 V)
    – JESD8B/JESD36 (2.7 V to 3.6 V)
• ESD protection:
    – HBM ANSI/ESDA/JEDEC JS-001 exceeds 2000 V
    – CDM JESD22-C101E exceeds 1000 V
   

View
Part name(s)' : 74AVC16834A 74AVC16834ADGG 74AVC16834ADGV
Description : 18-bit registered driver with inverted register enable and Dynamic Controlled Outputs™ (3-State)
Philips
Philips Electronics

DESCRIPTION
The 74AVC16834A is a 18-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP).
This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor (Live Insertion).
A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient. See the graphs on page 9 for typical curves.

FEATURES
• Wide supply voltage range of 1.2 V to 3.6 V
• Complies with JEDEC standard no. 8-1A/5/7
• CMOS low power consumption
• Input/output tolerant up to 3.6 V
• DCO (Dynamic Controlled Output) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
• Low inductance multiple VCC and GND pins for minimum noise and ground bounce
• Power off disables 74AVC16834A outputs, permitting Live Insertion
• Integrated input diodes to minimize input overshoot and undershoot
• Full PC133 solution provided when used with PCK2509S or PCK2510S and CBT16292

View
Part name(s)' : 74AVCM162835 74AVCM162835DGG
Description : 18-bit registered driver with 15 Ω termination resistors (3-State)
Philips
Philips Electronics

DESCRIPTION
The 74AVCM162835 is a 18-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP).

FEATURES
• Wide supply voltage range of 1.2 V to 3.6 V
• Complies with JEDEC standard no. 8-1A/5/7.
• CMOS low power consumption
• Input/output tolerant up to 3.6 V
• Low inductance multiple VCC and GND pins for minimum noise and ground bounce
• Integrated 15 Ω termination resistors to minimize output overshoot and undershoot
• Full PC133 solution provided when used with PCK2510S and CBT16292

View
12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]