Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
GMT
Global Mixed-mode Technology Inc
Description : 3.3V 1A Low Dropout Regulator

General Description

The G9133 positive 3.3V voltage Regulator features the ability to source 1A of output current. The Dropout voltage is 0.5V at 1A output current. The typical quiescent current is 5mA. Furthermore, the quiescent current is smaller when the Regulator is in the Dropout mode (VIN < 3.3V).

Familiar Regulator features such as over temperature and over current protection circuits are provided to prevent it from being damaged by abnormal operating conditions. A VEN pin is provided to disable the output when needed.



Features

Dropout voltage 0.5V @ IO = 1A

■ Output current in excess of 1A

■ Output voltage accuracy ±2.5%

■ Quiescent current, typically 5mA

■ Internal short circuit current limit

■ Internal over temperature protection

■ TO220 4pin Full-Mold package

■ ON/OFF control



 


GMT
Global Mixed-mode Technology Inc
Description : 5V 1A Low Dropout Regulator with Enable

General Description

The G9105 positive 5V voltage Regulator features the ability to source 1A of output current. The Dropout voltage is 0.5V at 1A output current. The typical quiescent current is 5mA. Furthermore, the quiescent current is smaller when the Regulator is in the Dropout mode (VIN < 5.5V).



Features

  Dropout voltage 0.5V @ IO= 1A

  Output current in excess of 1A

  Output voltage accuracy ±2.5%

  Quiescent current, typically 5mA

  Internal short circuit current limit

  Internal over temperature protection

  ON/OFF control


Fairchild
Fairchild Semiconductor
Description : Low Dropout voltage Regulator, 1A, 9V

Description

The KA78R09 is a Low-Dropout voltage Regulator suitable for various electronic equipments. It provides constant voltage power source with TO-220 4 lead full mold package. Dropout voltage of KA78R09 is beLow 0.5V in full rated current(1A). This Regulator has various function such as peak current protection, thermal shut down, overvoltage protection and output disable function.



Features

• 1A / 9V Output Low Dropout voltage Regulator

• TO220 Full-Mold package (4PIN)

• Overcurrent protection, Thermal shutdown

• Overvoltage protection, Short-Circuit protection

• With output disable function


Part Name(s) : G955
GMT
Global Mixed-mode Technology Inc
Description : 2.85V 1A Low Dropout Regulator

General Description
The G955 positive 2.85V voltage Regulator features the ability to source 1A of output current with a Dropout voltage of typically 0.5V over the entire operating temperature range. A Low quiescent current is provided over the entire current output current range. The typical quiescent current is 0.4mA. Furthermore, the quiescent current is smaller when the Regulator is in the Dropout mode ( VIN < 2.85V).
Familiar Regulator features such as over temperature, over current, and over voltage protection circuits are provided to prevent it from being damaged by abnormal operating conditions.

Features
Dropout voltage typically 0.5V @ IO = 1A
■ Output current in excess of 1A
■ Output voltage accuracy ±2%
■ Quiescent current, typically 400µA
■ Internal short circuit current limit
■ Internal over temperature protection
■ Internal over voltage protection

Part Name(s) : NTE1952
NTE-Electronic
NTE Electronics
Description : Integrated Circuit Positive 3 Terminal Voltage Regulator, Low Dropout Voltage, 8V, 1A

Description:

The NTE1952 positive voltage Regulator features the ability to source 1A of output current with a Dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quies cent current with 1A of output current and an input–output differential of 5V is therefore only 30mA. High quiescent currents only exist when the Regulator is in the Dropout mode (VIN – VOUT ≤ 3V).



Features:

Dropout Voltage: 0.5V (Typ) @ IO = 1A

• Output Current in Excess of 1A

• Reverse Battery Protection

• Internal Short Circuit Current Limit



 


Part Name(s) : NTE1953
NTE-Electronic
NTE Electronics
Description : Integrated Circuit Positive 3 Terminal Voltage Regulator, Low Dropout Voltage, 10V, 1A

Description:

The NTE1953 positive voltage Regulator features the ability to source 1A of output current with a Dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input–output differential of 5V is therefore only 30mA. High quiescent currents only exist when the Regulator is in the Dropout mode (VIN – VOUT ≤ 3V).



Features:

Dropout Voltage: 0.5V (Typ) @ IO = 1A

• Output Current in Excess of 1A

• Reverse Battery Protection

• Internal Short Circuit Current Limit



 


Part Name(s) : NTE1954
NTE-Electronic
NTE Electronics
Description : Integrated Circuit Positive 3 Terminal Voltage Regulator, Low Dropout Voltage, 12V, 1A

Description:

The NTE1954 positive voltage Regulator features the ability to source 1A of output current with a Dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input–output differential of 5V is therefore only 30mA. High quiescent currents only exist when the Regulator is in the Dropout mode (VIN – VOUT ≤ 3V).



Features:

Dropout Voltage: 0.5V (Typ) @ IO = 1A

• Output Current in Excess of 1A

• Reverse Battery Protection

• Internal Short Circuit Current Limit



 


Part Name(s) : NTE1955
NTE-Electronic
NTE Electronics
Description : Integrated Circuit Positive 3 Terminal Voltage Regulator, Low Dropout Voltage, 15V, 1A

Description:

The NTE1955 positive voltage Regulator features the ability to source 1A of output current with a Dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input–output differential of 5V is therefore only 30mA. High quiescent currents only exist when the Regulator is in the Dropout mode (VIN – VOUT ≤ 3V).



Features:

Dropout Voltage: 0.5V (Typ) @ IO = 1A

• Output Current in Excess of 1A

• Reverse Battery Protection

• Internal Short Circuit Current Limit



 


Part Name(s) : NTE1951
NTE-Electronic
NTE Electronics
Description : Integrated Circuit Positive 3 Terminal Voltage Regulator, Low Dropout Voltage, 5V, 1A

Description:

The NTE1951 positive voltage Regulator features the ability to source 1A of output current with a Dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input–output differential of 5V is therefore only 30mA. High quiescent currents only exist when the Regulator is in the Dropout mode (VIN – VOUT ≤ 3V).



Features:

Dropout Voltage: 0.5V (Typ) @ IO = 1A

• Output Current in Excess of 1A

• Reverse Battery Protection

• Internal Short Circuit Current Limit



 


Part Name(s) : H1117EADJ
HSMC
Hi-Sincerity Mocroelectronics
Description : 1A Low Dropout POSITIVE VOLTAGE Regulator

General Description
The H1117E is a 1A Low-Dropout positive voltage Regulator. It is available in fixed and adjustable output voltage versions. Over current and thermal protection are integrated onto the chip. Output current will decrease while it reaches the pre-set current or temperature limit. The Dropout voltage is specified at 1.2V Maximum at full rated output current. H1117E Series provides excellent regulation over variations due to changes in line, load and temperature. H1117E is three terminal Regulator and available in popular packages.

Features
Low Dropout Voltage 1.2V at 1A
• Adjustable or Fixed Voltage
• Maximum Line Regulation 0.45%
• Maximum Load Regulation 0.4%
• Adjust Pin Current Less Than 90 uA
• Over Current Protection
• Thermal Protection

Applications
• High Efficiency Linear Regulators
• 5V to 3.3V Voltage Converter
• Battery Charger

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]