Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : SP6685ER-L/TR SPX29302A SPX29302AT5 SPX29302AT5/TR SPX29302AT5_TR SPX29302AU5 SPX29302T5-L Sipex
Signal Processing Technologies
Description : 3A High Current, Low Dropout Voltage Regulator Adjustable, Fast Response Time View

DESCRIPTION

The SPX29302A is a 3A, highly accurate Voltage Regulator with a Low drop out Voltage of 370mV (typical) @ 3A. These Regulators are specifically designed for Low Voltage applications that require a Low Dropout Voltage and a fast transient response. Fault protection features include over-current, reverse battery, and positive and negative Voltage transients. On-Chip trimming adjusts the reference Voltage to 1% initial accuracy.



FEATURES

Adjustable Output Down To 1.25V

■ 1% Output Accuracy

■ Output Current of 3A

Low Dropout Voltage of 370mV @ 3A

■ Extremely Fast Transient Response

■ Reverse-Battery Protection

■ Zero Current Shutdown (5 pin version)

■ Standard TO-220 and TO-263 Packages



APPLICATIONS

■ Powering VGA & Sound Card

■ PowerPC™ Supplies

■ SMPS Post Regulator

■ High Efficiency “Green” Computer Systems

■ High Efficiency Linear Power Supplies

■ Constant Current Regulators

Adjustable Power Supplies

■ Battery Charger


Part Name(s) : SPX1582T SPX1582T-2.5 SPX1582T-2.8 SPX1582T-3.3 SPX1582U SPX1582U-2.5 SPX1582U-2.8 Sipex
Signal Processing Technologies
Description : 3A Ultra Low Dropout Voltage Regulator Fast Response, Adjustable & Fixed View

DESCRIPTION
The SPX1582 is a 3A Low Dropout Regulator with extremely Low Dropout Voltage. The Adjustable version requires only two external resistors to set the output Voltage.

FEATURES
Low Dropout Voltage 500mV at 3A Full Load Current
Adjustable Ouput Down to 1.25V from ATX Power Supply
■ Fixed Output Voltages of 3.3V and 2.5V
■ Extremely Tight Load and Line Regulation
■ Standard 5-Terminal Low Cost TO-220 and TO-263

APPLICATIONS
■ 3.3V to 2.8V ATX Power Supplies
■ 3.3V to 2.9V for Portable PENTIUMTM Processor
■ 5V to 3.5V VRE Supply
■ High efficiency "Green" Computer Systems

Part Name(s) : GJ1085 GTM
GTM CORPORATION
Description : 3A Low Dropout Positive Adjustable or Fixed-Mode Regulator View

Description
The GJ1085 is a Low Dropout positive Adjustable or fixed-mode Regulator with minimum of 3A output current capability. The product is specifically designed to provide well-regulated supply for Low Voltage IC applications such as high-speed bus termination and Low current 3.3V logic supply. GJ1085 is also well suited for other applications such as VGA cards. GJ1085 is guaranteed to have <1.4V Dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0V with 4.7 to 12V input supply by different output Voltage.

Features
• 3-Terminal Adjustable or fixed 1.5V,1.8V,2.5V,3.3V,5.0V
• 1.4V Maximum Dropout at Full Load current
• Fast Transient response
• Built-in Thermal Shutdown
• Output current limiting

Part Name(s) : H1085U H1085-3.3U Hi-Sincerity
Hi-Sincerity Microelectronics
Description : 3A Low Dropout POSITIVE Voltage Regulator View

General Description
The H1085U is a 3A Low-Dropout positive Voltage Regulator. It is available in fixed and Adjustable output Voltage versions. Over Current and thermal protection are integrated onto the chip. Output current will decrease while it reaches the pre-set current or temperature limit. The Dropout Voltage is specified at 1.2V Maximum at full rated output current. H1085U Series provides excellent regulation over variations due to changes in line, load and temperature. H1085U is three terminal Regulator and available in popular packages.

Features
Low Dropout Voltage 1.2V at 3A.
Adjustable or Fixed Voltage.
• Line Regulation Typically 0.015%.
• Load Regulation Typically 0.05%.
• Adjust Pin Current Less Than 90 uA.
• Over Current Protection.
• Thermal Protection.

Applications
• High Efficiency Linear Regulators.
• Post Regulators For Switching Supplies.
• 5V to 3.3V Voltage Converter.
• Battery Charger.


Part Name(s) : SC1592 SC1592EVB SC1592IMTR SC1592ISTR Semtech
Semtech Corporation
Description : Low Dropout High Performance Adjustable Positive Voltage Regulator View

Description

The SC1592 is a 3A Low Dropout high performance linear Voltage Regulator, that provides a Low Voltage, high current output with a minimum of external components, utilizing dual supply configuration.



Features

Wide input range, VIN= 1.25V to 16V,VCNTL= 3V to 16V

3A Guaranteed Output Current

260mV (typ) @ 3A Dropout Voltage in dual supply mode

1% Initial Accuracy

Adjustable output Voltage, down to 0.8V

Programmable current limiting and thermal shutdown

Fast transient response

Excellent line and load regulation

Power SO-8 and 7-lead DDPAK


Part Name(s) : AIC1085 AIC1085-15 AIC1085-15CE AIC1085-15CM AIC1085-15CT AIC1085-18 AIC1085-18CE AIC1085-18CM AIC1085-18CT AIC1085-33 AIC
Analog Intergrations
Description : 3A Low Dropout POSITIVE Adjustable Regulator View

DESCRIPTION

The AIC1085 is a Low Dropout three terminal Regulator with 3A output current capability. The output Voltage is Adjustable with the use of a resistor divider or fixed 1.5V, 1.8V, and 3.3V. Dropout is guaranteed at a maximum of 1.4V at maximum output current. Its Low Dropout Voltage and fast transient response make it ideal for Low Voltage microprocessor applications. Internal current and thermal limiting provides protection against any overload condition that would create excessive junction temperatures.



FEATURES

l Dropout Voltage 1.3V at 3A Output Current.

l Fast Transient Response.

l Extremely Tight Line and Load Regulation.

l Internal Thermal and Current Limiting.

l Adjustable Output Voltage or Fixed 1.5V, 1.8V, 3.3V.

l Standard 3-Pin Power Packages.



APPLICATIONS

l Mother Board I/O Power Supplies.

l Microprocessor Power Supplies.

l High Current Regulator.

l Post Regulator for Switching Supply.



 


Part Name(s) : RH1085 RH1085MK RH1085 RH1085MK Linear
Linear Technology
Description : 3A Low Dropout Positive Adjustable Regulator View

DESCRIPTION
The RH1085 positive Adjustable Regulator is designed to provide 3A with higher efficiency than currently available devices. All internal circuitry is designed to operate down to 1V input-to-output differential and the Dropout Voltage is fully specified as a function of load current. Dropout is guaranteed at a maximum of 1.5V at maximum output current, decreasing at Lower load currents. On-chip trimming adjusts the output Voltage to 1%. Current limit is also trimmed, minimizing the stress on both the Regulator and power source circuitry under overload conditions. DESCRIPTION

The RH1085 is pin compatible with older 3-terminal Regulators. A 10μF output capacitor is required on these new device. However, this is usually included in most Regulator designs.

The wafer lots are processed to Linear Technology Corporation’s in-house Class S fLow-to-yield circuits usable in stringent military applications.

Part Name(s) : CLM2830 CLM2830AU CLM2830AT Calogic
Calogic, LLC
Description : 3.0A Low Dropout Voltage Regulator Adjustable View

PRODUCT DESCRIPTION
The Calogic CLM2830 is a Low power 3A Adjustable Voltage Regulator that is very easy to use. It requires only 2 external resistors to set the output Voltage. This device is an excellent choice for use in powering IntelTM microprocessors to convert from +5V to 3.3V supplies and as a post Regulator for switching supplies applications.

FEATURES
Adjustable Output Down to 1.2V
• Output Current of 3A
Low Dropout Voltage
• Extremely Tight Load Regulation 0.01%(typ.)
• Extremely Tight Line Regulation 0.015%(typ.)
• Current and Thermal Limiting
• Standard 3-Terminal Low Cost TO-220
• Similar to Industry Standard LT1085

APPLICATIONS
• Powering Intel PentiumTM µP from +5V Supplies
• Power PCTM Supplies
• SMPS Post-Regulator
• High Efficiency "Green" Computer Systems
• High Efficiency Linear Power Supplies
• Portable Instrumentation
• Constant Current Regulators
Adjustable Power Supplies
• Battery Chargers

Part Name(s) : L1085DG L1085G L1085S3G L1085SG L1085TG Niko-Sem
Niko Semiconductor
Description : 3A Adjustable Low Dropout Linear Regulator (LDO) View

GENERAL DESCRIPTION 

The L1085G is a positive and Low Dropout three-terminal Voltage Regulator with 3A output current capability. This device is designed for use in Low Voltage applications that offers Lower Dropout Voltage and faster transient response.This device is fully protected against over current faults, over temperature operation,reversed input polarity, reversed lead insertion, transient Voltage spike …etc.  On-Chips trimming the reference Voltage to 1% and features the Low Dropout of maxi-

mum 1.45 volts. The L1085G Series Regulators are available in the popular industry standard TO-220 TO-263 and TO-252 packages.





FEATURES

• Very easy to use, it requires only two external resistors toset the output Voltage 

Low Dropout Voltage: 1.3V typical at up to 3A

Low ground current

• Fast transient response

• Current & thermal limiting

• Line regulation: 0.5% typical

• Load regulation: 0.5% typical

• TO-220, TO-263 and TO-252 packages


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]