Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : CMPD200 CMPD300 CMPD400 Central-Semiconductor
Central Semiconductor
Description : FORWARD Reference Diode (STABISTOR) View

FORWARD Reference Diode (STABISTOR)

Part Name(s) : MAX1448 MAX1448EHJ MAX1448EHJ-T MaximIC
Maxim Integrated
Description : 10-Bit, 80Msps, Single 3.0V, Low-Power ADC with Internal Reference View

General Description
The MAX1448 3V, 10-bit analog-to-digital converter (ADC) features a fully differential input, a pipelined 10-stage ADC architecture with wideband track-and-hold (T/H), and digital error correction incorporating a fully differential signal path. The ADC is optimized for low power, high dynamic performance in imaging and digital communications applications.

Features
♦ Single 3.0V Operation
♦ Excellent Dynamic Performance
   59dB SNR at fIN = 20MHz
   74dBc SFDR at fIN = 20MHz
♦ Low Power
   40mA (Normal Operation)
   5µA (Shutdown Mode)
♦ Fully Differential Analog Input
♦ Wide 2VP-P Differential Input Voltage Range
♦ 400MHz -3dB Input Bandwidth
♦ On-Chip 2.048V Precision Bandgap Reference
♦ CMOS-Compatible Three-State Outputs
♦ 32-Pin TQFP Package
♦ Evaluation Kit Available (MAX1448 EV Kit)

Applications
   Ultrasound Imaging
   CCD Imaging
   Baseband and IF Digitization
   Digital Set-Top Boxes
   Video Digitizing Applications

Part Name(s) : AMS1009 AMS1009A AMS1009AN AMS1009AS AMS1009B AMS1009BN AMS1009BS ADIMOS
Advanced Monolithic Systems Inc
Description : VOLTAGE Reference Diode View

GENERAL DESCRIPTION
The AMS1009 is a precision band-gap voltage Reference Diode. This voltage Reference features a very low dynamic impedance and good temperature coefficient, operating over a wide current range of 400µA to 10mA. On-chip trimming is used to provide tight tolerance and minimize temperature drift. A third terminal allows the Reference voltage to be adjusted to ±5% to calibrate out system errors.
The AMS1009 is used as a precision 2.5V low voltage Reference for digital voltmeters, power supplies or op amp circuitry, and the 2.5V make it easy to obtain a stable Reference from 5V logic supplies.
The AMS1009 is available in TO-92 and SO-8 packages operating over a 0°C to 70°C temperature range.

FEATURES
 • ±5 mV (±0.2%) Max. Initial Tolerance (A grade)
 • Wide Operating Current Range
 • Low Voltage Reference 2.5V
 • Max. 0.6W Dynamic Impedance (A grade)
 • Low Temperature Coefficient

APPLICATIONS
 • Power Supplies
 • Instrumentation
 • 8 Bit A/D, D/A Reference
 • Current Loop Measurement and Control Systems
 • Reference for 5V Systems

Part Name(s) : AMS2950 AMS2950AC AMS2950ACN AMS2950ACN-2.5 AMS2950ACN-2.5V AMS2950ACN-3.0 AMS2950ACN-3.0V AMS2950ACN-3.3 AMS2950ACN-3.3V AMS2950ACN-X ADIMOS
Advanced Monolithic Systems Inc
Description : 150mA LOW DROPOUT VOLTAGE REGULATOR View

GENERAL DESCRIPTION

The AMS2950 and AMS2951 are micropower voltage regulators ideally suited for use in battery-powered systems. These devices feature very low quiescent current (typ.75µA), and very low dropout voltage (typ.45mV at light loads and 380mV at 150mA) thus prolonging battery life. The quiescent current increases only slightly in dropout. The AMS2950/AMS2951 has positive transient protection up to 60V and can survive unregulated input transient up to 20V below ground.

The AMS2950 and AMS2951 were designed to include a tight initial tolerance (typ. 0.5%), excellent load and line regulation (typ. 0.05%), and a very low output voltage temperature coefficient, making these devices useful as a low-power voltage Reference.

The AMS2950 is offered in the 3-pin TO-92 package. AMS2951 is available in 8-pin plastic SOIC and DIP packages and offers three major additional system features. An error flag output warns of a low output voltage, often due to failing batteries on input. The AMS2951 also features the logic-compatible shutdown input which enables the regulator to be switched on and off. The AMS2951 device may be pin-strapped for a 5.0V, 3.3V, 3.0V or 2.5 output, or programmed from 1.24V to 29V with an external pair of resistors.



FEATURES

5.0V, 3.3V, 3.0V and 2.5V Versions

• High Accuracy Output Voltage

• Extremely Low Quiescent Current

• Low Dropout Voltage

• Extremely Tight Load and Line Regulation

• Very Low Temperature Coefficient

• Current and Thermal Limiting

• Needs Minimum Capacitance (1µF) for Stability

• Unregulated DC Positive Transients 60V



ADDITIONAL FEATURES (AMS2951 ONLY)

• 1.24V to 29V Programmable Output

• Error Flag Warning of Voltage Output Dropout

• Logic Controlled Electronic Shutdown



APPLICATIONS

• Battery Powered Systems

• Portable Consumer Equipment

• Cordless Telephones

• Portable (Notebook) Computers

• Portable Instrumentation

• Radio Control Systems

• Automotive Electronics

• Avionics

• Low-Power Voltage Reference



 



Part Name(s) : AMS2950 AMS2950AC AMS2950AC-2.5 AMS2950AC-2.5V AMS2950AC-3.0 AMS2950AC-3.0V AMS2950AC-3.3 AMS2950AC-3.3V AMS2950ACN-2.5 AMS2950ACN-2.5V AMS
Advanced Monolithic Systems Inc
Description : 150mA LOW DROPOUT VOLTAGE REGULATOR View

GENERAL DESCRIPTION

The AMS2950 and AMS2951 are micropower voltage regulators ideally suited for use in battery-powered systems. These devices feature very low quiescent current (typ.75µA), and very low dropout voltage (typ.45mV at light loads and 380mV at 150mA) thus prolonging battery life. The quiescent current increases only slightly in dropout. The AMS2950/AMS2951 has positive transient protection up to 60V and can survive unregulated input transient up to 20V below ground.

The AMS2950 and AMS2951 were designed to include a tight initial tolerance (typ. 0.5%), excellent load and line regulation (typ. 0.05%), and a very low output voltage temperature coefficient, making these devices useful as a low-power voltage Reference.

The AMS2950 is offered in the 3-pin TO-92 package. AMS2951 is available in 8-pin plastic SOIC and DIP packages and offers three major additional system features. An error flag output warns of a low output voltage, often due to failing batteries on input. The AMS2951 also features the logic-compatible shutdown input which enables the regulator to be switched on and off. The AMS2951 device may be pin-strapped for a 5.0V, 3.3V, 3.0V or 2.5 output, or programmed from 1.24V to 29V with an external pair of resistors.



FEATURES

· 5.0V, 3.3V, 3.0V and 2.5V Versions

· High Accuracy Output Voltage

· Extremely Low Quiescent Current

· Low Dropout Voltage

· Extremely Tight Load and Line Regulation

· Very Low Temperature Coefficient

· Current and Thermal Limiting

· Needs Minimum Capacitance (1mF) for Stability

· Unregulated DC Positive Transients 60V



ADDITIONAL FEATURES (AMS2951 ONLY)

· 1.24V to 29V Programmable Output

· Error Flag Warning of Voltage Output Dropout

· Logic Controlled Electronic Shutdown



APPLICATIONS

· Battery Powered Systems

· Portable Consumer Equipment

· Cordless Telephones

· Portable (Notebook) Computers

· Portable Instrumentation

· Radio Control Systems

· Automotive Electronics

· Avionics

· Low-Power Voltage Reference



 


Part Name(s) : 1N821 1N821A 1N822 1N823 1N823A 1N824 1N825 1N825A 1N826 1N827 DIGITRON
Digitron Semiconductors
Description : TEMPERATURE COMPENSATED ZENER Reference Diode View

TEMPERATURE COMPENSATED ZENER Reference Diode
6.2 & 6.55 Volt

Part Name(s) : ZRT050 ZRT050GA1 ZRT050GC1 ZRT050GC2 ZRT050N8A1 ZRT050N8C1 ZRT050N8C2 ZRT050C2 ZRT050C1 ZRT050A1 Zetex
Zetex => Diodes
Description : 5.0V LOW POWER PRECISION Reference SOURCE View

DEVICE DESCRIPTION
The ZRT050 is a monolithic integrated circuit providing a precise stable Reference voltage of 4.9V at 500µA.
The circuit features a knee current of 150µA and operation over a wide range of temperatures and currents.

FEATURES
• Trimmable output
• Excellent temperature stability
• Low output noise figure
• Available in two temperature ranges
• 1 and 2% initial voltage tolerance versions available
• No external stabilising capacitor required in most cases
• Low slope resistance
• TO18 package
• SOT223 and SO8 small outline packages

Part Name(s) : MAX1444 MAX1444EHJ MAX1444 MAX1444EHJ/V MAX1444EHJ MAX1444EHJ/V+ MaximIC
Maxim Integrated
Description : 10-Bit, 40Msps, 3.0V, Low-Power ADC with Internal Reference View

General Description
The MAX1444 10-bit, 3V analog-to-digital converter (ADC) features a pipelined 10-stage ADC architecture with fully differential wideband track-and-hold (T/H) input and digital error correction incorporating a fully differential signal path. This ADC is optimized for lowpower, high dynamic performance applications in imaging and digital communications.

Features
♦ Single 3.0V Operation
♦ Excellent Dynamic Performance
   59.5dB SNR at fIN = 20MHz
   74dBc SFDR at fIN = 20MHz
♦ Low Power
   19mA (Normal Operation)
   5μA (Shutdown Mode)
♦ Fully Differential Analog Input
♦ Wide 2Vp-p Differential Input Voltage Range
♦ 400MHz -3dB Input Bandwidth
♦ On-Chip 2.048V Precision Bandgap Reference
♦ CMOS-Compatible Three-State Outputs
♦ 32-Pin TQFP Package
♦ Evaluation Kit Available

Applications
   Ultrasound Imaging
   CCD Imaging
   Baseband and IF Digitization
   Digital Set-Top Boxes
   Video Digitizing Applications

Part Name(s) : I7032 I7032-EN I7032-ET ETC2
Unspecified
Description : +3.3V to +5.0V, 200Mbps Laser-Diode Driver View

[iCREATE]



General description

The i7032 is the 3.3V to5V, 200Mbps laser-Diode driver with automatic power control (APC). Bothaccept differential PECL inputs and provide complementary output currents. A temperature-compensated Reference voltage is provided for laser biasand modulation current programming. This allows maximum 80mA to be programmed for bias and modulation current with two external resistors.



Features

— Rise / fall time less than 1 ns.

— Maximum 80mA bias current.

— Maximum 80mA modulation current.

— Differential PECL inputs.

— Automatic Power Control (APC).

— +3.3V to +5V supply voltage.

— On chip temperature-compensated Reference voltage.

— Wide operation temperature range: -40℃~ +85℃.

— Integrated soft-start circuit.

— On chip temperature-compensated modulation current.



Applications

— 155Mbps SDH/SONET

— Laser-Diode Transmitters



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]