Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : MAX1204 MAX1204B MAX1204A MAX1204ACAP MAX1204ACAP+ MAX1204ACPP MAX1204ACPP+ MAX1204AEAP MAX1204AEAP+ MAX1204AEPP MaximIC
Maxim Integrated
Description : 5V, 8-Channel, Serial, 10-Bit ADC with 3V Digital Interface View

General Description
The MAX1204 is a 10-Bit data-acquisition system specifically designed for use in applications with mixed +5V (analog) and +3V (Digital) supply voltages. It operates with a single +5V analog supply or dual ±5V analog supplies, and combines an 8-channel multiplexer, internal track/hold, and serial Interface with high conversion speed and low power consumption.

Features
♦ 8-Channel Single-Ended or 4-Channel Differential Inputs
♦ Operates from +5V Single or ±5V Dual Supplies
♦ User-Adjustable Output Logic Levels (2.7V to 5.25V)
♦ Low Power: 1.5mA (Operating Mode) 2µA (Power-Down Mode)
♦ Internal Track/Hold, 133kHz Sampling Rate
♦ Internal 4.096V Reference
♦ SPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface
♦ Software-Configurable Unipolar/Bipolar Inputs
♦ 20-Pin PDIP/SSOP
♦ Pin-Compatible 12-Bit Upgrade: MAX1202

Applications
    5V/3V Mixed-Supply Systems
    Data Acquisition
    Process Control
    Battery-Powered Instruments
    Medical Instruments

Part Name(s) : MAX1202ACAP-T MAX1202AEAP-T MAX1202BC MAX1202BC/D MAX1202BCAP-T MAX1202BD MAX1202BEAP-T MAX1202BMJP MAX1202EVKIT MAX1203BC MaximIC
Maxim Integrated
Description : 5V, 8-Channel, Serial, 12-Bit ADCs with 3V Digital Interface View

General Description

The MAX1202/MAX1203 are 12-bit data-acquisition systems specifically designed for use in applications with mixed +5V (analog) and +3V (Digital) supply voltages. They operate with a single +5V analog supply or dual ±5V analog supplies, and combine an 8-channel multiplexer, high-bandwidth track/hold, and serial Interface with high conversion speed and low power consumption.



Features

♦ 8-Channel Single-Ended or 4-Channel Differential Inputs

♦ Operates from Single +5V or Dual ±5V Supplies

♦ User-Adjustable Output Logic Levels (2.7V to 5.25V)

♦ Low Power: 1.5mA (operating mode) 2µA (power-down mode)

♦ Internal Track/Hold, 133kHz Sampling Rate

♦ Internal 4.096V Reference (MAX1202)

♦ SPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface

♦ Software-Configurable Unipolar/Bipolar Inputs

♦ 20-Pin DIP/SSOP


Part Name(s) : XRD4417 XRD4417AID Exar
Exar Corporation
Description : Linear CCD Signal Processor with 10-Bit ADC and Serial Interface View

Linear CCD Signal Processor with 10-Bit ADC and Serial Interface

Part Name(s) : MAX1091 MAX1091ACEI MAX1091AEEI MAX1091BCEI MAX1091BEEI MAX1093 MAX1093ACEG MAX1093BEEG MAX1093AEEG MAX1093BCEG MaximIC
Maxim Integrated
Description : 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface View

General Description
The MAX1091/MAX1093 low-power, 10-Bit analog-to-Digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel Interface. They operate with a single +3V analog supply and feature a VLOGIC pin that allows them to Interface directly with a +1.8V to +3.6V Digital supply.
Power consumption is only 5.7mW (VDD = VLOGIC) at the maximum sampling rate of 250ksps. Two software-selectable power-down modes enable the MAX1091/MAX1093 to be shut down between conversions; accessing the parallel Interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates.

Features
10-Bit Resolution, ±0.5 LSB Linearity
♦ +3V Single-Supply Operation
♦ User-Adjustable Logic Level (+1.8V to +3.6V)
♦ Internal +2.5V Reference
♦ Software-Configurable, Analog Input Multiplexer
   8-Channel Single-Ended/
   4-Channel Pseudo-Differential (MAX1091)
   4-Channel Single-Ended/
   2-Channel Pseudo-Differential (MAX1093)
♦ Software-Configurable, Unipolar/Bipolar Inputs
♦ Low Power
   1.9mA (250ksps)
   1.0mA (100ksps)
   400µA (10ksps)
   2µA (Shutdown)
♦ Internal 3MHz Full-Power Bandwidth Track/Hold
♦ Byte-Wide Parallel (8 + 2) Interface
♦ Small Footprint:
   28-Pin QSOP (MAX1091)
   24-Pin QSOP (MAX1093)
  
Applications
   Industrial Control Systems
   Data Logging
   Energy Management
   Patient Monitoring
   Data-Acquisition Systems
   Touch Screens


Part Name(s) : IS25F011A IS25F011A-3V-R IS25F011A-5V-R IS25F021A IS25F021A-3V-R IS25F021A-5V-R IS25F041A IS25F041A-3V-R IS25F041A-5V-R ISSI
Integrated Silicon Solution
Description : 1M-BIT, 2M-BIT, AND 4M-BIT SERIAL FLASH MEMORIES with 4-PIN SPI Interface View

DESCRIPTION
The IS25F011A, IS25F021A, and IS25F041A Serial Flash memories provide a storage solution for systems limited in power, pins, space, hardware, and firmware resources. They are ideal for applications that store voice, text, and data in a portable or mobile environment. Using ISSIs patented single transistor EEPROM cell, the devices offer a high-density, low-voltage, low-power, and cost-effective nonvolatile memory solution.

FEATURES
• Flash Storage for Resource-Limited Systems
    – Ideal for portable/mobile and microcontroller-based applications that store voice, text, and data
• NexFLASH TM Serial Flash Memory
    – Patented single transistor EEPROM memory
    – High-density, low-voltage/power, cost-effective
    – Small 264-byte sectors
    – 10K/100K write cycles, ten years data retention
• Ultra-low Power for Battery-Operation
    – Single 5V or 3V supply for read and erase/write
    – < 1 µA standby current, 5 mA active @ 3V (typical)
    – Low frequency read command for very low power
    – No pre-erase. Erase/Write time of 5 ms/sector @ 5V, ensures efficient battery use
• 4-pin SPI Serial Interface
    – Easily Interfaces to popular microcontrollers
    – Clock operation as fast as 16 MHz
• On-chip Serial SRAM
    – Dual 264-byte Read/Write SRAM buffers
    – Use in conjunction with or independent of Flash
    – Off-loads RAM-limited microcontrollers
• Special Features for Media-Storage Applications
    – Byte-level addressing
    – Transfer or compare sector to SRAM
    – Versatile hardware and software write-protection
    – Alternate oscillator frequency for EMI sensitive applications.
    – In-system electronic part number identification
    – Removable Serial Flash Module package option
    – SFK-SPI Serial Flash Development Kit

Part Name(s) : TDA8787A TDA8787AHL TDA8787AHL/S1 Philips
Philips Electronics
Description : 10-Bit, 3.0 V, up to 25 Msps analog-to-Digital Interface for CCD cameras View

GENERAL DESCRIPTION

The TDA8787A is a 10-Bit analog-to-Digital Interface for CCD cameras. The device includes a correlated double sampling circuit, a PGA, clamp loops and a low-power 10-Bit ADC, together with its reference voltage regulator.

The PGA gain and the ADC input clamp level are controlled via the serial Interface.



FEATURES

• Correlated Double Sampling (CDS), Programmable Gain Amplifier (PGA), 10-Bit Analog-to-Digital Converter (ADC) and reference regulator included

• Fully programmable via a 3-wire serial Interface

• Sampling frequency up to 25 MHz; (TDA8787AHL = 18 MHz; TDA8787AHL/S1 = 25 MHz)

• PGA gain range of 36 dB (in steps of 0.1 dB)

• Low power consumption of only 170 mW at 2.7 V

• Power consumption in standby mode of 4.5 mW (typical value)

• 3.0 V operation; 2.5 to 3.6 V operation for the Digital outputs

• Active control pulses polarity selectable via serial Interface

• 8-bit DAC included for analog settings

• TTL compatible inputs, CMOS compatible outputs.


Part Name(s) : XRD64L40 XRD64L40AIQ XRD64L40AIU Exar
Exar Corporation
Description : 3V, 10-Bit 20MSPS CMOS ADC View

3V, 10-Bit 20MSPS CMOS ADC

Part Name(s) : MAX5251 MAX5251ACAP MAX5251ACPP MAX5251BCAP MAX5251BCPP MAX5251AEPP MAX5251BEPP MAX5251AEAP MAX5251BEAP MAX5251BMJP MaximIC
Maxim Integrated
Description : +3V, Quad, 10-Bit Voltage-Output DAC with Serial Interface View

General Description
The +3V MAX5251 combines four low-power, voltage output, 10-Bit Digital-to-analog converters (DACs) and four precision output amplifiers in a space-saving, 20-pin package. In addition to the four voltage outputs, each amplifier’s negative input is also available to the user. This facilitates specific gain configurations, remote sensing, and high output drive capacity, making the MAX5251 ideal for industrial-process-control applications. Other features include software shutdown, hardware shutdown lockout, an active-low reset that clears all registers and DACs to zero, a user-programmable logic output, and a serial-data output.
Each DAC has a double-buffered input organized as an input register followed by a DAC register. A 16-bit serial word loads data into each input/DAC register. The 3-wire serial Interface is compatible with SPI™/QSPI™ and Microwire™. It allows the input and DAC registers to be updated independently or simultaneously with a single software command. All logic inputs are TTL/CMOS logic compatible.

Features
♦ Four 10-Bit DACs with Configurable Output Amplifiers
♦ +3.0V to +3.6V Single-Supply Operation
♦ Low Supply Current: 0.8mA Normal Operation 3µA Shutdown Mode
♦ Available in 20-Pin SSOP
♦ Power-On Reset Clears all Registers and DACs to Zero
♦ SPI/QSPI and Microwire Compatible
♦ Simultaneous or Independent Control of DACs via 3-Wire Serial Interface
♦ User-Programmable Digital Output
♦ Schmitt-Trigger Digital Inputs for Direct Optocoupler Interface
♦ 12-Bit Upgrade Available: MAX5253

Applications
  Digital Offset and Gain Adjustment
  Microprocessor-Controlled Systems
  Industrial Process Controls
  Automatic Test Equipment
  Remote Industrial Controls
  Motion Control

Part Name(s) : NX25F011B NX25F011B-3S NX25F011B-3S-R NX25F011B-3V NX25F011B-3V-R NX25F011B-5S NX25F011B-5S-R NX25F011B-5V NX25F011B-5V-R NX25F021B NexFlash
NexFlash -> Winbond Electronics
Description : 1M-BIT, 2M-BIT, AND 4M-BIT SERIAL FLASH MEMORIES with 4-PIN SPI Interface View

DESCRIPTION

The NX25F011B, NX25F021B, and NX25F041B Serial Flash memories provide a storage solution for systems limited in power, pins, space, hardware, and firmware resources. They are ideal for applications that store voice, text, and data in a portable or mobile environment. Using NexFlashs patented single transistor EEPROM cell, the devices offer a high-density, low-voltage, low-power, and cost-effective non-volatile memory solution. The devices operate on a single 5V or 3V (2.7V-3.6V) supply for Read and Erase/Write with typical current consumption as low as 2.5 mA active and less than 1 µA standby. Sector erase/write speeds as fast as 7.5 ms increase system performance, minimize power-on time, and maximize battery life.



FEATURES

• Flash Storage for Resource-Limited Systems

   – Ideal for portable/mobile and microcontroller-based applications that store voice, text, and data

• 0.35µ NexFlashMemory Technology

   – 1M/2M/4M-bit with 512/1024/2048 sectors

   – Small 264-byte sectors

   – Erase/Write time of 7.5 ms/sector (typical)

   – Optional 8KB (32 sector) block erase for faster programming

• Ultra-low Power for Battery-Operation

   – Single 5V or 3V supply for read and erase/write

   – 1 mA standby current, 2.5 mA active @ 3V (typical)

   – Low frequency read command for lower power

• 4-pin SPI Serial Interface

   – Easily Interfaces to popular microcontrollers

   – Clock operation as fast as 20 MHz

• On-chip Serial SRAM

   – Single 264-byte Read/Write SRAM buffer

   – Use in conjunction with or independent of Flash

   – Off-loads RAM-limited microcontrollers

• Special Features for Media-Storage Applications

   – Byte-level addressing for reads and SRAM writes

   – Transfer or compare sector to SRAM

   – Versatile hardware and software write-protection

   – In-system electronic part number option

   – Removable Serial Flash Module package option

   – Serial Flash Development Kit



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]