Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : M62333P M62338P M62333FP M62338FP Mitsubishi
MITSUBISHI ELECTRIC
Description : 8-BIT 3CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

DESCRIPTION
The M62333/M62338 is an integrated circuit semiconductor of CMOS structure WITH 3 channels of built in D-A CONVERTERs WITH output BUFFER operational AMPLIFIERS.

FEATURES
• Digital data transfer format I2C BUS serial data method
• Output BUFFER operational amplifier it operates in the whole voltage range from Vcc to ground.
• High output current drive capacity ±1.0mA over

APPLICATION
    Conversion from digital data to analog control data for home-use and industrial equipment.
    Signal gain control or automatic adjustment of DISPLAY MONITOR or CTV.

Part Name(s) : M62392P M62392FP Mitsumi
Mitsumi
Description : 8-BIT 12CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62392P,FP is a CMOS 12-channel D-A CONVERTER WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the two-line I2C BUS.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 1.0mA , and an output voltage range is nearly between ground and VrefU.
Maximum 8 ICs can be connected to a BUS by using three chip-select pins, so that it is possible to handle up to 96 channels.

FEATURES
I2C-BUS serial data method
• Wide output voltage range Nearly between ground and VrefU (0~5V)
• High output current drive capability over ±1.0mA
• 2 setting voltage ranges by dual input pins for upper voltage references (VrefU1,U2)

APPLICATION
    Conversion from digital data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.

Part Name(s) : M62392P M62392FP Mitsubishi
MITSUBISHI ELECTRIC
Description : 8-BIT 12CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62392P,FP is a CMOS 12-channel D-A CONVERTER WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the two-line I2C BUS.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 1.0mA , and an output voltage range is nearly between ground and VrefU.
Maximum 8 ICs can be connected to a BUS by using three chip-select pins, so that it is possible to handle up to 96 channels.

FEATURES
I2C-BUS serial data method
• Wide output voltage range Nearly between ground and VrefU (0~5V)
• High output current drive capability over ±1.0mA
• 2 setting voltage ranges by dual input pins for upper voltage references (VrefU1,U2)

APPLICATION
    Conversion from digital data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.

Part Name(s) : M62333FP M62333P M62338FP M62338P M62333P M62338P M62333FP M62338FP Renesas
Renesas Electronics
Description : 8-BIT 3CH I2C BUS D/A CONVERTER WITH BUFFER AMPLIFIERS View

Description
The M62333/M62338 is an integrated circuit semiconductor of CMOS structure WITH 3 channels of built in D/A CONVERTERs WITH output BUFFER operational AMPLIFIERS.

Features
• Digital data transfer format: I2C BUS serial data method
• Output BUFFER operational amplifier: It operates in the whole voltage range from VCC to ground.
• High output current drive capacity: ±1.0 mA over

Application
    Conversion from digital data to analog control data for home-use and industrial equipment.
    Signal gain control or automatic adjustment of Display-monitor or CTV.


Part Name(s) : M62398P M62398FP Mitsubishi
MITSUBISHI ELECTRIC
Description : 8BIT 12CH I2C BUS D–A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62398P,FP is a 12V type CMOS 12-channel D–A CONVERTERs WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the two-line I2C BUS.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 2.5mA ,and an output voltage range is nearly between ground and VrefU.
Maximum 8 ICs can be connected to a BUS by using three chip-set pins , so that it is possible to handle up to 96 channels.

FEATURES
I2C BUS serial data method
• Wide output range Nearly between ground and VrefU(0~12V).
• High output current drive capability Over ±2.5mA
• 2 setting voltage ranges by dual input pins for upper voltage references (VrefU1,U2)

APPLICATION
    Conversion from digital control data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.

Part Name(s) : M62398P M62398FP Renesas
Renesas Electronics
Description : 8BIT 12CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62398P,FP is a 12V type CMOS 12-channel D–A CONVERTERs WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the two-line I2C BUS.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 2.5mA ,and an output voltage range is nearly between ground and VrefU.
Maximum 8 ICs can be connected to a BUS by using three chip-set pins , so that it is possible to handle up to 96 channels.

FEATURES
I2C BUS serial data method
• Wide output range Nearly between ground and VrefU(0~12V).
• High output current drive capability Over ±2.5mA
• 2 setting voltage ranges by dual input pins for upper voltage references (VrefU1,U2)

APPLICATION
    Conversion from digital control data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.

Part Name(s) : M62334FP M62334P M62339FP M62339P Mitsubishi
MITSUBISHI ELECTRIC
Description : 8-BIT 4CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

DESCRIPTION
The  M62334/M62339 is  an  integrated  circuit semiconductor of CMOS structure WITH 4 channels of built in D-A CONVERTERs WITH output BUFFER operational AMPLIFIERS. The input is 2-wires serial method is used for the transfer format of  digital data  to  allow  connection  WITH a microcomputer WITH minimum wiring.
The output BUFFER operational amplifier employs AB class output circuit WITH sync and source drive capacity of 1.0mA or more,and it operates in the whole voltage range from Vcc to ground.
The M62333 and the M62338 differ only in their  slave address.

FEATURES
• Digital data  transfer format I2C BUS serial data method
• Output BUFFER operational amplifier it operates in the whole voltage range from Vcc to  ground.
• High output current drive capacity ±1.0mA over

APPLICATION
    Conversion from digital  data to analog control data for home-use and industrial equipment.
    Signal gain control or automatic adjustment of DISPLAY MONITOR or CTV.

Part Name(s) : M62343FP M62343P Mitsubishi
MITSUBISHI ELECTRIC
Description : 8-BIT 3CH D-A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62343P,FP is a CMOS 3 channel D-A CONVERTER WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the three-line DI,CLK,LD.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 1.0mA , and an output voltage range is nearly between ground and Vcc.

FEATURES
• 10bit serial data input (3-wire serial transfer method)
• Wide output voltage range Nearly between ground and Vcc(0 to 5V)
• High output current drive capability over ±1.0mA

APPLICATION
    Conversion from digital data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.

Part Name(s) : M62393FP M62393P Mitsubishi
MITSUBISHI ELECTRIC
Description : 8-BIT 8CH I2C-BUS D-A CONVERTER WITH BUFFER AMPLIFIERS 2 View

DESCRIPTION
The M62393 is an integrated circuit semiconductor of CMOS structure WITH 8 channels of built-in D-A CONVERTERs WITH output BUFFER operational AMPLIFIERS.

FEATURES
• Digital data transfer format I C-BUS serial data method
• Output BUFFER operational amplifier it operates in the whole voltage range from VrefU(0 to 5V)to ground.
• High output current drive capacity ±1.0mA over
• Preparation two high level reference voltage terminal because there are two high level reference voltage terminal,it can set up two kinds differ voltage range. 2

APPLICATION
    Conversion from digital control data to analog control data for home-use and industrial equipment.
    Signal gain control or automatic adjustment of DISPLAY MONITOR or CTV.

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]