Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : EL5825CR EL5825CU EL5825C Elantec
Elantec -> Intersil
Description : 8-Channel TFT-LCD Reference Voltage Generator View

General Description
The EL5825C is designed to produce the Reference Voltages required in TFT-LCD applications. Each output is programmed to the required Voltage with 10 bits of resolution. Reference pins determine the high and low Voltages of the output range, which are capable of swinging to either supply rail. Programming of each output is performed using the serial interface. A serial out pin enables daisy chaining of multiple devices.

Features
8-Channel Reference outputs
• Accuracy of ±0.1%
• Supply Voltage of 5V to 16V
• Digital supply 3.3V to 5V
• Low supply current of 10mA
• Rail-to-rail capability

Applications
TFT-LCD drive circuits
Reference Voltage Generators

Part Name(s) : EL5226IR EL5226IR-T13 EL5226IR-T7 EL5226IRZ EL5226IRZ-T13 EL5226IRZ-T7 EL5326IR EL5326IR-T13 EL5326IR-T7 EL5326IRZ Renesas
Renesas Electronics
Description : 10- and 12-Channel TFT-LCD Reference Voltage Generators View

The EL5226 and EL5326 are designed to produce the Reference Voltages required in TFT-LCD applications. Each output is programmed to the required Voltage with 10 bits of resolution. Reference pins determine the high and low Voltages of the output range, which are capable of swinging to either supply rail. Programming of each output is performed using the I2C serial interface.

Features
• 10- to 12-channel Reference outputs
• Accuracy of ±1%
• Supply Voltage of 5V to 16.5V
• Digital supply 3.3V to 5V
• Low supply current of 10mA
• Rail-to-rail capability
• Pb-Free available (RoHS compliant)

Applications
TFT-LCD drive circuits
Reference Voltage Generators

Part Name(s) : EL5226IR EL5226IR-T13 EL5226IR-T7 EL5226IRZ EL5226IRZ-T13 EL5226IRZ-T7 EL5326IR EL5326IR-T13 EL5326IR-T7 EL5326IRZ Intersil
Intersil
Description : 10- and 12-Channel TFT-LCD Reference Voltage Generators View

The EL5226 and EL5326 are designed to produce the Reference Voltages required in TFT-LCD applications. Each output is programmed to the required Voltage with 10 bits of resolution. Reference pins determine the high and low Voltages of the output range, which are capable of swinging to either supply rail. Programming of each output is performed using the I2C serial interface.

Features
• 10- to 12-channel Reference outputs
• Accuracy of ±1%
• Supply Voltage of 5V to 16.5V
• Digital supply 3.3V to 5V
• Low supply current of 10mA
• Rail-to-rail capability
• Pb-Free available (RoHS compliant)

Applications
TFT-LCD drive circuits
Reference Voltage Generators

Part Name(s) : TSL1020 TSL1020IF TSL1020IFT SL1020I ST-Microelectronics
STMicroelectronics
Description : 20 + 1 channel buffer for TFT-LCD panels View

Description
The TSL1020 is composed of 20 + 1 channel buffers which are used to buffer the Reference Voltage for gamma correction in thin film transistor (TFT) liquid crystal displays (LCD).

Features
■ Wide supply Voltage: 5.5V to 16.8V
■ Low operating current: 8.5mA typ. at 25°C
■ Bandwidth at -3dB: 5MHz
■ High output current COM amplifier: ±150mA
■ Industrial temperature range: -40°C to +95°C
■ Small package: TQFP48 ePad

Application
■ TFT liquid crystal display (LCD)


Part Name(s) : BUF20800 BUF20800AIDCPR TI
Texas Instruments
Description : 18-Channel GAMMA Voltage Generator with Two Programmable VCOM Channels View

DESCRIPTION
The BUF20800 is a programmable Voltage Reference Generator designed for gamma correction in TFT-LCD panels. It provides 18 programmable outputs for gamma correction and two channels for VCOM adjustment, each with 10-bit resolution.

FEATURES
● 18-Channel GAMMA CORRECTION
● 2-CHANNEL PROGRAMMABLE VCOM: 100mA IOUT
● 10-BIT RESOLUTION
● RAIL-TO-RAIL OUTPUT
● LOW SUPPLY CURRENT: 900µA/ch
● SUPPLY Voltage: 7V to 18V
● DIGITAL SUPPLY: 2.0V to 5.5V
● INDUSTRY-STANDARD, TWO-WIRE INTERFACE: 3.4MHz High-Speed Mode
● HIGH ESD RATING: 4kV HBM, 1kV CDM, 200V MM
● DEMO BOARD AND SOFTWARE AVAILABLE

APPLICATIONS
● REPLACES RESISTOR-BASED GAMMA SOLUTIONS
TFT-LCD Reference DRIVERS
● DYNAMIC GAMMA CONTROL

Part Name(s) : ILI9488 AM-320480B3TZQW-00H ETC
Unspecified
Description : LCD 3.5 inch Amorphous-TFT-LCD View

[AMP DISPLAY INC]

Features
LCD 3.5 inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) for mobile-phone or handy electrical equipments.
Construction: 3.5” a-Si color TFT-LCD, White LED driver & Backlight.

Main LCD:
   2.1 Amorphous-TFT 3.5 inch display, normally black type
   2.2 320(RGB) X480 dots Matrix, 1/480 Duty.
   2.3 Main LCD Driver IC: ILI9488
   2.4 262K: Red-6bit, Green-6bit, Blue-6bit (18-bit interface)
(3) Interface: RGB Interface

Part Name(s) : AS19-F AS19-G AS19-H1F AS19-H1G AS19-HF AS19-HG AS19H1G EC5579-F EC5579-G EC5579-HF ETC
Unspecified
Description : E-CMOS AS19-H1G / TQFP 48 / 18+1 Channel Voltage Buffers for TFT LCD View

E-CMOS AS19-H1G 18+1 Channel Voltage Buffers for TFT LCD.



The AS19-H1G is an 18+1 channel Voltage buffer that buffers Reference Voltage for gamma correction in a thin film transistor liquid crystal display (TFT LCD). This device AS19-H1G incorporating a Vcom amplifier circuits, four rail to rail buffer amplifier circuits (the highest two stage and lowest two stage) and 14 buffer amplifiers circuits. The AS19-H1G is available in a space saving 48-pin TQFP package, and the operating temperature is from –20'C to +85'C. It is suitable for TFT-LCD Reference Driver.  ( www.ecmos.com.tw)




Part Name(s) : BUF20800 BUF20800AIDCPR BB
Burr-Brown -> Texas Instruments
Description : 18-Channel GAMMA Voltage Generator with Two Programmable VCOM Channels View

DESCRIPTION
The BUF20800 is a programmable Voltage Reference Generator designed for gamma correction in TFT-LCD panels. It provides 18 programmable outputs for gamma correction and two channels for VCOM adjustment, each with 10-bit resolution.

FEATURES
● 18-Channel GAMMA CORRECTION
● 2-CHANNEL PROGRAMMABLE VCOM: 100mA IOUT
● 10-BIT RESOLUTION
● RAIL-TO-RAIL OUTPUT
● LOW SUPPLY CURRENT: 900µA/ch
● SUPPLY Voltage: 7V to 18V
● DIGITAL SUPPLY: 2.0V to 5.5V
● INDUSTRY-STANDARD, TWO-WIRE INTERFACE: 3.4MHz High-Speed Mode
● HIGH ESD RATING: 4kV HBM, 1kV CDM, 200V MM
● DEMO BOARD AND SOFTWARE AVAILABLE

APPLICATIONS
● REPLACES RESISTOR-BASED GAMMA SOLUTIONS
TFT-LCD Reference DRIVERS
● DYNAMIC GAMMA CONTROL

Part Name(s) : EC5575 ETC
Unspecified
Description : 14+1 Channel Voltage Buffers for TFT LCD View

The EC5575 is a 14+1 channel Voltage buffers that buffers Reference Voltage for

gamma correction in a thin film transistor iquid crystal display (TFT LCD). This

device incorporating  a Vcom amplifier circuits, four rail to rail buffer amplifier

circuits (the highest two stage and lowest two stage) and 10 buffer amplifiers circuits.



The EC5575 is available in a space saving 48-pin TQFP package, and the operating

temperature is from –20°C to +85°C.



 



E-CMOS Corp. (www.ecmos.com.tw)


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]