Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : AT89C1051U-12PA AT89C1051U-12SA Atmel
Atmel Corporation
Description : 8-bit Microcontroller with 1K Byte Flash View

Description

The AT89C1051U is a low-voltage, high-performance CMOS 8-bit microcomputer with 1K Byte of Flash programmable and erasable read only memory. It has the same functionality and operation as the AT89C1051 with the addition of a UART programmable serial port. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C1051U is a powerful microcomputer which provides a highly-flexible and cost effective solution to many embedded control applications.



Features

• Compatible with MCS-51™ Products

1K Bytes of Reprogrammable Flash Memory

– Endurance: 1,000 Write/Erase Cycles

• 2.7V to 6V Operating Range

• Fully Static Operation: 0 Hz to 24 MHz

• Two-level Program Memory Lock

• 64 x 8-bit Internal RAM

• 15 Programmable I/O Lines

• Two 16-bit Timer/Counters

• Six Interrupt Sources

• Programmable Serial UART Channel

• Direct LED Drive Outputs

• On-chip Analog Comparator

• Low-power Idle and Power-down Modes


Part Name(s) : AT89C1051 AT89C1051-12PA AT89C1051-12PC AT89C1051-12PI AT89C1051-12SA AT89C1051-12SC AT89C1051-12SI AT89C1051-24PC AT89C1051-24PI AT89C1051-24SC Atmel
Atmel Corporation
Description : 8-bit Microcontroller with 1K Byte Flash View

Description

The AT89C1051 is a low-voltage, high-performance CMOS 8-bit microcomputer with 1K Byte of Flash programmable and erasable read only memory (PEROM). The device is manufactured using Atmel’s high density nonvolatile memory technology and is compatible with the industry standard MCS-51™ instruction set. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C1051 is a powerful microcomputer which provides a highly flexible and cost effective solution to many embedded control applications.



Features

• Compatible with MCS-51™ Products

1K Byte of Reprogrammable Flash Memory

   – Endurance: 1,000 Write/Erase Cycles

• 2.7V to 6V Operating Range

• Fully Static Operation: 0 Hz to 24 MHz

• Two-Level Program Memory Lock

• 64 Bytes SRAM

• 15 Programmable I/O Lines

• One 16-Bit Timer/Counter

• Three Interrupt Sources

• Direct LED Drive Outputs

• On-Chip Analog Comparator

• Low Power Idle and Power Down Modes



 


Part Name(s) : AT89C1051U AT89C1051U-12PC AT89C1051U-12PI AT89C1051U-12SC AT89C1051U-12SI AT89C1051U-24PC AT89C1051U-24PI AT89C1051U-24SC AT89C1051U-24SI Atmel
Atmel Corporation
Description : 8-bit Microcontroller with 1K Byte Flash View

Description

The AT89C1051U is a low-voltage, high-performance CMOS 8-bit microcomputer with 1K Byte of Flash programmable and erasable read only memory. It has the same functionality and operation as the AT89C1051 with the addition of a UART programmable serial port. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C1051U is a powerful microcomputer which provides a highly-flexible and cost effective solution to many embedded control applications.



Features

• Compatible with MCS-51™ Products

1K Bytes of Reprogrammable Flash Memory

– Endurance: 1,000 Write/Erase Cycles

• 2.7V to 6V Operating Range

• Fully Static Operation: 0 Hz to 24 MHz

• Two-level Program Memory Lock

• 64 x 8-bit Internal RAM

• 15 Programmable I/O Lines

• Two 16-bit Timer/Counters

• Six Interrupt Sources

• Programmable Serial UART Channel

• Direct LED Drive Outputs

• On-chip Analog Comparator

• Low-power Idle and Power-down Modes


Part Name(s) : P89LPC932A1FA P89LPC932A1FDH P89LPC932A1FHN P89LPC932A1 Philips
Philips Electronics
Description : 8-bit Microcontroller with accelerated two-clock 80C51 core 8 kB 3 V Byte-erasable Flash with 512-Byte data EEPROM View

General description
The P89LPC932A1 is a single-chip Microcontroller, available in low cost packages, based on a high performance processor architecture that executes instructions in two to four clocks, six times the rate of standard 80C51 devices. Many system-level functions have been incorporated into the P89LPC932A1 in order to reduce component count, board space, and system cost.

Features
Principal features
■ 8 kB Byte-erasable Flash code memory organized into 1 kB sectors and 64-Byte pages. Single-Byte erasing allows any Byte(s) to be used as non-volatile data storage.
■ 256-Byte RAM data memory, 512-Byte auxiliary on-chip RAM.
■ 512-Byte customer data EEPROM on chip allows serialization of devices, storage of set-up parameters, etc.
■ Two analog comparators with selectable inputs and reference source.
■ Two 16-bit counter/timers (each may be configured to toggle a port output upon timer overflow or to become a PWM output) and a 23-bit system timer that can also be used as a RTC.
■ Enhanced UART with fractional baud rate generator, break detect, framing error detection, and automatic address detection; 400 kHz Byte-wide I2C-bus communication port and SPI communication port.
■ CCU provides PWM, input capture, and output compare functions.
■ High-accuracy internal RC oscillator option allows operation without external oscillator components. The RC oscillator option is selectable and fine tunable.
■ 2.4 V to 3.6 V VDD operating range. I/O pins are 5 V tolerant (may be pulled up or driven to 5.5 V).
■ 28-pin TSSOP, PLCC, and HVQFN packages with 23 I/O pins minimum and up to 26 I/O pins while using on-chip oscillator and reset options.


Part Name(s) : P89LPC9321 P89LPC9321FA P89LPC9321FDH P89LPC9321FN NXP
NXP Semiconductors.
Description : 8-bit Microcontroller with accelerated two-clock 80C51 core 8 kB 3 V Byte-erasable Flash with 512-Byte data EEPROM View

General description

The P89LPC9321 is a single-chip Microcontroller, available in low cost packages, based on a high performance processor architecture that executes instructions in two to four clocks, six times the rate of standard 80C51 devices. Many system-level functions have been incorporated into the P89LPC9321 in order to reduce component count, board space, and system cost.



Features

Principal features

■ 8 kB Byte-erasable Flash code memory organized into 1 kB sectors and 64-Byte pages.

   Single-Byte erasing allows any Byte(s) to be used as non-volatile data storage.

■ 256-Byte RAM data memory and a 512-Byte auxiliary on-chip RAM.

■ 512-Byte customer data EEPROM on-chip allows serialization of devices, storage of setup parameters, etc.

■ Two analog comparators with selectable inputs and reference source.

■ Single Programmable Gain Amplifier (PGA) with selectable gains of 2x, 4x, 8x, or 16x can be applied to analog comparator inputs.

■ Two 16-bit counter/timers (each may be configured to toggle a port output upon timer overflow or to become a PWM output).

■ A 23-bit system timer that can also be used as real-time clock consisting of a 7-bit prescaler and a programmable and readable 16-bit timer.

■ Enhanced UART with a fractional baud rate generator, break detect, framing error detection, and automatic address detection; 400 kHz Byte-wide I2C-bus communication port and SPI communication port.

■ Capture/Compare Unit (CCU) provides PWM, input capture, and output compare functions.

■ 2.4 V to 3.6 V VDD operating range. I/O pins are 5 V tolerant (may be pulled up or driven to 5.5 V).

■ 4-level low voltage (brownout) detect allows a graceful system shutdown when power fails. May optionally be configured as an interrupt.

■ 28-pin TSSOP, PLCC and DIP packages with 23 I/O pins minimum and up to 26 I/O pins while using on-chip oscillator and reset options.



 


Part Name(s) : ATTINY15L ATTINY15L-1PC ATTINY15L-1SC ATTINY15L-1PI ATTINY15L-1SI ATTINY15 ATTINY15L ATTINY15L-1PC ATTINY15L-1PI ATTINY15L-1PU Atmel
Atmel Corporation
Description : 8-bit Microcontroller with 1K Byte Flash View

Description
The ATtiny15L is a low-power CMOS 8-bit Microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny15L achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

Features
• High-performance, Low-power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
    – 90 Powerful Instructions – Most Single Clock Cycle Execution
    – 32 x 8 General Purpose Working Registers
    – Fully Static Operation
• Nonvolatile Program and Data Memories
    – 1K Byte In-System Programmable Flash Program Memory Endurance: 1,000 Write/Erase Cycles
    – 64 Bytes EEPROM Endurance: 100,000 Write/Erase Cycles
    – Programming Lock for Flash Program Data Security
• Peripheral Features
    – Interrupt and Wake-up on Pin Change
    – Two 8-bit Timer/Counters with Separate Prescalers
    – One 150 kHz, 8-bit High-speed PWM Output
    – 4-channel 10-bit ADC
        One Differential Voltage Input with Optional Gain of 20x
    – On-chip Analog Comparator
    – Programmable Watchdog Timer with On-chip Oscillator
• Special Microcontroller Features
    – In-System Programmable via SPI Port
    – Enhanced Power-on Reset Circuit
    – Programmable Brown-out Detection Circuit
    – Internal, Calibrated 1.6 MHz Tunable Oscillator
    – Internal 25.6 MHz Clock Generator for Timer/Counter
    – External and Internal Interrupt Sources
    – Low-power Idle and Power-down Modes
• Power Consumption at 1.6 MHz, 3V, 25°C
    – Active: 3.0 mA
    – Idle Mode: 1.0 mA
    – Power-down: < 1 µA
• I/O and Packages
    – 8-lead PDIP and 8-lead SOIC: 6 Programmable I/O Lines
• Operating Voltages
    – 2.7V - 5.5V
• Internal 1.6 MHz System Clock

Part Name(s) : LC875048B LC875064B LC875058B SANYO
SANYO -> Panasonic
Description : 8-bit Single Chip Microcontroller with 64/56/48K-Byte EPROM and 2048-Byte RAM On Chip View

Overview
The LC875064B/56B/48B Microcontroller is 8-bit single chip Microcontroller with the following on-chip functional blocks:
    - CPU: Operable at a minimum bus cycle time of 100ns
    - 64K/56K/48K Bytes ROM
    - 2048 Byte RAM
    - two high performance 16 bit timer/counters (can be divided into 8 bit units)
    - two 8 bit timers with prescalers
    - timer for use as date/time clock
    - one synchronous serial I/O ports (with automatic block transmit/receive function)
    - one asynchronous/synchronous serial I/O port
    - 12-bit PWM × 2
    - 3-channel × 8-bit AD converter
    - high speed 8-bit parallel interface
    - 16-source 10-vectored interrupt system
All of the above functions are fabricated on a single chip.

Part Name(s) : ST10F269Z2QX ST-Microelectronics
STMicroelectronics
Description : 16-BIT MCU with MAC UNIT, 256K Byte Flash MEMORY AND 12K Byte RAM View

INTRODUCTION

The ST10F269Z2Qx is a derivative of the STMicroelectronics ST10 family of 16-bit single-chip CMOS Microcontrollers. It combines high CPU performance (up to 20 million instructions per second) with high peripheral functionality and enhanced I/O-capabilities. It also provides on-chip high-speed single voltage Flash memory, on-chip high-speed RAM, and clock generation via PLL.

ST10F269Z2Qx is processed in 0.35µm CMOS technology. The MCU core and the logic is supplied with a 5V to 3.3V on chip voltage regulator. The part is supplied with a single 5V supply and I/Os work at 5V.



■ HIGH PERFORMANCE 40MHz CPU with DSP FUNCTION

   – 16-BIT CPU with 4-STAGE PIPELINE

   – 50ns INSTRUCTION CYCLE TIME AT 40MHz MAX CPU CLOCK

   – MULTIPLY/ACCUMULATE UNIT (MAC) 16 x 16-BIT MULTIPLICATION, 40-BIT ACCUMULATOR

   – REPEAT UNIT

   – ENHANCED BOOLEAN BIT MANIPULATION FA CILITIES

   – ADDITIONAL INSTRUCTIONS TO SUPPORT HLL AND OPERATING SYSTEMS

   – SINGLE-CYCLE CONTEXT SWITCHING SUPPORT

■ MEMORY ORGANIZATION

   – 256K Byte ON-CHIP Flash MEMORY SINGLE VOLTAGE with ERASE/PROGRAM CONTROLLER

   – UP TO 1K ERASING/PROGRAMMING CYCLES

   – UP TO 16M Byte LINEAR ADDRESS SPACE FOR CODE AND DATA (5M ByteS with CAN)

   – 2K Byte ON-CHIP INTERNAL RAM (IRAM)

   – 10K Byte ON-CHIP EXTENSION RAM (XRAM)

■ FAST AND FLEXIBLE BUS

   – PROGRAMMABLE EXTERNAL BUS CHARACTE RISTICS FOR DIFFERENT ADDRESS RANGES

   – 8-bit OR 16-BIT EXTERNAL DATA BUS

   – MULTIPLEXED OR DEMULTIPLEXED EXTERNAL ADDRESS/DATA BUSES

   – FIVE PROGRAMMABLE CHIP-SELECT SIGNALS

   – HOLD-ACKNOWLEDGE BUS ARBITRATION SUP PORT

■ INTERRUPT

   – 8-CHANNEL PERIPHERAL EVENT CONTROLLER FOR SINGLE CYCLE INTERRUPT DRIVEN DATA TRANSFER

   – 16-PRIORITY-LEVEL INTERRUPT SYSTEM with 56 SOURCES, SAMPLING RATE DOWN TO 25ns

■ TIMERS

   – TWO MULTI-FUNCTIONAL GENERAL PURPOSE TIMER UNITS with 5 TIMERS

■ TWO 16-CHANNEL CAPTURE / COMPARE UNITS

■ A/D CONVERTER

   – 16-CHANNEL 10-BIT

   – 4.85µs CONVERSION TIME AT 40MHz CPU CLOCK

■ 4-CHANNEL PWM UNIT

■ SERIAL CHANNELS

   – SYNCHRONOUS / ASYNCHRONOUS SERIAL CHANNEL

   – HIGH-SPEED SYNCHRONOUS CHANNEL

■ TWO CAN 2.0B INTERFACES OPERATING ON ONE OR TWO CAN BUSSES (30 OR 2x15 MESSAGE OBJECTS)

■ FAIL-SAFE PROTECTION

   – PROGRAMMABLE WATCHDOG TIMER

   – OSCILLATOR WATCHDOG

■ ON-CHIP BOOTSTRAP LOADER

■ CLOCK GENERATION

   – ON-CHIP PLL

   – DIRECT OR PRESCALED CLOCK INPUT

■ REAL TIME CLOCK

■ UP TO 111 GENERAL PURPOSE I/O LINES

   – INDIVIDUALLY PROGRAMMABLE AS INPUT, OUTPUT OR SPECIAL FUNCTION

   – PROGRAMMABLE THRESHOLD (HYSTERESIS)

■ IDLE AND POWER DOWN MODES

■ SINGLE VOLTAGE SUPPLY: 5V ±10% (EMBEDDED REGULATOR FOR 3.3 V CORE SUPPLY).

■ TEMPERATURE RANGES: -40 +125°C, -40 to 85°C

■ 144-PIN PQFP PACKAGE



 


Part Name(s) : ATTINY13V-10PI ATTINY13V-10SI ATTINY13V-10SSI ATTINY13V-10SSUI ATTINY13-20PI ATTINY13-20SI ATTINY13-20SSI Atmel
Atmel Corporation
Description : 8-bit Microcontroller with 1K Bytes In-System Programmable Flash View

Overview
The ATtiny13 is a low-power CMOS 8-bit Microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny13 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

Features
• High Performance, Low Power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
   – 120 Powerful Instructions – Most Single Clock Cycle Execution
   – 32 x 8 General Purpose Working Registers
   – Fully Static Operation
   – Up to 20 MIPS Througput at 20 MHz
• Non-volatile Program and Data Memories
   – 1K Byte of In-System Programmable Program Memory Flash Endurance: 10,000 Write/Erase Cycles
   – 64 Bytes In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles
   – 64 Bytes Internal SRAM
   – Programming Lock for Self-Programming Flash Program and EEPROM Da Security
• Peripheral Features
   – One 8-bit Timer/Counter with Prescaler and Two PWM Channels
   – 4-channel, 10-bit ADC with Internal Voltage Reference
   – Programmable Watchdog Timer with Separate On-chip Oscillator
   – On-chip Analog Comparator
• Special Microcontroller Features
   – debugWIRE On-chip Debug System
   – In-System Programmable via SPI Port
   – External and Internal Interrupt Sources
   – Low Power Idle, ADC Noise Reduction, and Power-down Modes
   – Enhanced Power-on Reset Circuit
   – Programmable Brown-out Detection Circuit
   – Internal Calibrated Oscillator
• I/O and Packages
   – 8-pin PDIP/SOIC: Six Programmable I/O Lines
   – 20-pad MLF: Six Programmable I/O Lines
• Operating Voltage:
   – 1.8 - 5.5V for ATtiny13V
   – 2.7 - 5.5V for ATtiny13
• Speed Grade
   – ATtiny13V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
   – ATtiny13: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
• Industrial Temperature Range
• Low Power Consumption
   – Active Mode:
      1 MHz, 1.8V: 240µA
   – Power-down Mode:
      < 0.1µA at 1.8V

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]