Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : M62398P M62398FP Mitsubishi
MITSUBISHI ELECTRIC
Description : 8BIT 12CH I2C BUS D–A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62398P,FP is a 12V type CMOS 12-channel D–A CONVERTERs WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the two-line I2C BUS.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 2.5mA ,and an output voltage range is nearly between ground and VrefU.
Maximum 8 ICs can be connected to a BUS by using three chip-set pins , so that it is possible to handle up to 96 channels.

FEATURES
I2C BUS serial data method
• Wide output range Nearly between ground and VrefU(0~12V).
• High output current drive capability Over ±2.5mA
• 2 setting voltage ranges by dual input pins for upper voltage references (VrefU1,U2)

APPLICATION
    Conversion from digital control data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.

Part Name(s) : M62398P M62398FP Renesas
Renesas Electronics
Description : 8BIT 12CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62398P,FP is a 12V type CMOS 12-channel D–A CONVERTERs WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the two-line I2C BUS.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 2.5mA ,and an output voltage range is nearly between ground and VrefU.
Maximum 8 ICs can be connected to a BUS by using three chip-set pins , so that it is possible to handle up to 96 channels.

FEATURES
I2C BUS serial data method
• Wide output range Nearly between ground and VrefU(0~12V).
• High output current drive capability Over ±2.5mA
• 2 setting voltage ranges by dual input pins for upper voltage references (VrefU1,U2)

APPLICATION
    Conversion from digital control data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.

Part Name(s) : M62392P M62392FP Mitsumi
Mitsumi
Description : 8-BIT 12CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62392P,FP is a CMOS 12-channel D-A CONVERTER WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the two-line I2C BUS.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 1.0mA , and an output voltage range is nearly between ground and VrefU.
Maximum 8 ICs can be connected to a BUS by using three chip-select pins, so that it is possible to handle up to 96 channels.

FEATURES
I2C-BUS serial data method
• Wide output voltage range Nearly between ground and VrefU (0~5V)
• High output current drive capability over ±1.0mA
• 2 setting voltage ranges by dual input pins for upper voltage references (VrefU1,U2)

APPLICATION
    Conversion from digital data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.

Part Name(s) : M62392P M62392FP Mitsubishi
MITSUBISHI ELECTRIC
Description : 8-BIT 12CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

GENERAL DESCRIPTION
The M62392P,FP is a CMOS 12-channel D-A CONVERTER WITH output BUFFER AMPLIFIERS.
It can communicate WITH a microcontroller via few wiring thanks to the adoption of the two-line I2C BUS.
The output BUFFER amplifier employs AB class output WITH sinking and sourcing capability of more than 1.0mA , and an output voltage range is nearly between ground and VrefU.
Maximum 8 ICs can be connected to a BUS by using three chip-select pins, so that it is possible to handle up to 96 channels.

FEATURES
I2C-BUS serial data method
• Wide output voltage range Nearly between ground and VrefU (0~5V)
• High output current drive capability over ±1.0mA
• 2 setting voltage ranges by dual input pins for upper voltage references (VrefU1,U2)

APPLICATION
    Conversion from digital data to analog control data for both consumer and industrial equipment.
    Gain control and automatic adjustment of DISPLAY-MONITOR or CTV.


Part Name(s) : M62352AGP Renesas
Renesas Electronics
Description : 8-bit 12CH D/A CONVERTER WITH BUFFER AMPLIFIERS View

Description

M62352A is a CMOS structured semiconductor integrated circuit integrating 12 channels of built-in D/A CONVERTERs WITH high performance BUFFER operational amplifier or each channel output. The 3-wire serial interface (DI, CLK, LD) method is used for the transfer format or digital data to allow connection WITH microcomputer WITH minimum wiring. DO terminal is provided to allow cascading serial use.

Built-in BUFFER operational AMPLIFIERS are designed to operate or full swing in the whole voltage range from VCC to GND for each input/output. And their higher stability for capacitive load perfectly fits in to the use for electronic volume (VCA) or the replacement for semi-variable resistor for tuning.



Features

• 12-bit serial data input (3 wire serial data transfer method, DI, CLK, LD)

• Corresponds to TTL input for digital input (VINH ≥ 2 V, VINL ≤ 0.8 V)

• R-2R + segment method high performance 12CH 8-bit D/A CONVERTERs

12CH BUFFER operational AMPLIFIERS operating in the whole voltage range from VCC to GND

BUFFER operational AMPLIFIERS WITH high oscillation stability for capacitive load



Application

Adjustment or control of industrial or home-use electronic equipments such as VTR camera, VTR set, TV, and CRT display.



 


Part Name(s) : DA-0518S42NA DA-0520D72N DA-0520S41NA DA-0560S41NB DA-1218D72N DA-1218S42NA DA-1218S42NB DA-2018D68N DA-2018S41NA DA-2040S42NA AAC
American Accurate Components, Inc.
Description : Detector Log Video AMPLIFIERS (DLVA) View

There are three basic types of logarithmic AMPLIFIERS,
    Detector-Log Video AMPLIFIERS (DLVAs)
    Successive Detection Logarithmic
    AMPLIFIERS True Log AMPLIFIERS (TLAs)

A detector log video amplifier (DLVA) is a type of logarithmic amplifier in which the envelope of the input RF signal is detected by a standard "linear" diode detector. The output of the detector is compressed in the video amplifier section, making input/output relationship similar to a logarithmic conversion. In general, the DLVA offers the advantage of operating over the widest frequency range, but at the sacrifice of dynamic range.
   
Features
    Advanced Microwave Hybrid Integrated
    Circuits Technology
    Frequency Range from 0.5 to 18GHz
    Superior Log Linearity
    Wide Dynamic Range
    Wide Bandwidth
    Low Current Consumption
    DC-Coupled DLVAs
    High Performance
    High Reliability
    High Repeatability
    Compact Size And Light Weight
    Custom Design Available
   
Applications
    Radar Systems
    Navigation Systems
    Laboratory Measurement And Test Equipment
    Telecommunications And Data Communications
    Military And Instrumentation Systems
    Other Commercial Applications
   

Part Name(s) : AK9813B AK9813BF AKM
Asahi Kasei Microdevices
Description : 12CH 8BIT D/A CONVERTER WITH EEPROM View

General Description
The AK9813B includes 12 channel, 8BIT D/A CONVERTERs WITH on-chip output BUFFER amps and it is capable to store the input digital data of each DAC by on-chip non-volatile CMOS EEPROM. The AK9813B is optimally designed for various circuit adjustments for consumer and industrial equipments and it is ideally suited for replacing mechanical trimmers.

Features
□ EEPROM SECTION
    ▪ 12 words x 8BIT x 4 organization for DAC
□ D/A CONVERTER SECTION
    ▪ 12 channels
    ▪ Resolution : 8BIT
    ▪ DNL : -1 to +2 LSB
    ▪ INL : ±1.5 LSB
    ▪ Analog Output Voltage Range : GND to VCC
□ Operating Voltage Range
    ▪ Digital section : 2.7V to 5.5V
    ▪ Analog section : 4.5V to 5.5V, 2.7V to 3.6V
□ 24pin VSOP

Part Name(s) : AK9813AF AK9813A AKM
Asahi Kasei Microdevices
Description : 12CH 8BIT D/A CONVERTER WITH EEPROM View

General Description
The AK9813A includes 12 channel, 8BIT D/A CONVERTERs WITH on-chip output BUFFER amps and it is capable to store the input digital data of each DAC by on-chip non-volatile CMOS EEPROM. The AK9813A is optimally designed for various circuit adjustments for consumer and industrial equipments and it is ideally suited for replacing mechanical trimmers.

Features
□ EEPROM SECTION
    • 12 words Õ 8BIT Õ 4 organization for DAC
□ D/A CONVERTER section
    • 12 channels
    • Resolution : 8BIT
    • DNL : -1a+2 LSB
    • INL : ‘1.5 LSB
    • Analog Output Voltage Range : GND a VCC
□ Operating Voltage Range
    • Digital section : 2.7Va5.5V
    • Analog section : 5.0V‘0.5V,3.3V‘0.3V
□ 24pin VSOP

Part Name(s) : M62333P M62338P M62333FP M62338FP Mitsubishi
MITSUBISHI ELECTRIC
Description : 8-BIT 3CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS View

DESCRIPTION
The M62333/M62338 is an integrated circuit semiconductor of CMOS structure WITH 3 channels of built in D-A CONVERTERs WITH output BUFFER operational AMPLIFIERS.

FEATURES
• Digital data transfer format I2C BUS serial data method
• Output BUFFER operational amplifier it operates in the whole voltage range from Vcc to ground.
• High output current drive capacity ±1.0mA over

APPLICATION
    Conversion from digital data to analog control data for home-use and industrial equipment.
    Signal gain control or automatic adjustment of DISPLAY MONITOR or CTV.

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]