Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : PL-2.01 Unspecified
Unspecified
Description : Hi-Speed USB host to host bridge controller View

[Prolific Technology Inc.]



OVERVIEW

The PL-2.01 is a single chip Hi-Speed USB Host-to-Host Bridge Controller. With PL-2.01 embedded cable, users can quickly transFEr large amount and large size of files directly from one PC to another. Also it’s useful for computer data backup/restore, synchronization or file sharing. Additionally, the chip enables two or more Hi-Speed USB or USB1.1 equipped PCs to connect to each other using USB ports as a network. Since Hi-Speed USB extends the Speed up to 480 Mbps – 40 times more than previous USB, the network constructed by PL-2.01 has data rates almost 5 times faster than a conventional 100BT Ethernet network. Implemented with remote NDIS, users can easily build up this network at a turbo Speed without the troubled installation of drivers and add-on network interface cards.



FEATURES

Full compliance with the USB Specification v2.0 

On-chip USB2.0 Phy 

Support both Peer to Peer and Network functions

TransFEr data and share resources between two or more PCs with Speed up to 480Mbps.

Remote NDIS specification compliant (For network function only)

Embedded Turbo 8032 micro-controller

Supports USB Full/High Speed Control/Interrupt/Bulk Endpoints TransFEr

On-Chip 3.3V-2.5V regulator for internal circuit


Part Name(s) : ISP1562 ISP1562BE NXP
NXP Semiconductors.
Description : Hi-Speed USB PCI host controller View

General description

The ISP1562 is a Peripheral Component Interconnect (PCI)-based, single-chip Universal Serial Bus (USB) host controller. It integrates two Original USB Open Host Controller Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI) core, and two transceivers that are compliant with Hi-Speed USB and Original USB. The functional parts of the ISP1562 are fully compliant with Universal Serial Bus Specification Rev. 2.0, Open Host Controller Interface Specification for USB Rev. 1.0a, Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 1.0, PCI Local Bus Specification Rev. 2.2, and PCI Bus Power Management Interface Specification Rev. 1.1.



FEatures

■ Complies with Universal Serial Bus Specification Rev. 2.0

■ Supports data transFEr at high-Speed (480 Mbit/s), full-Speed (12 Mbit/s) and low-Speed (1.5 Mbit/s)

■ Two Original USB OHCI cores comply with Open Host Controller Interface Specification for USB Rev. 1.0a

■ One Hi-Speed USB EHCI core complies with Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 1.0

■ Supports PCI 32-bit, 33 MHz interface compliant with PCI Local Bus Specification Rev. 2.2, with support for D3cold standby and wake-up modes; all I/O pins are 3.3 V standard

■ Compliant with PCI Bus Power Management Interface Specification Rev. 1.1 for all hosts (EHCI and OHCI), and supports all power states: D0, D1, D2, D3hot and D3cold

■ CLKRUN support for mobile applications, such as internal notebook design

■ Configurable subsystem ID and subsystem Vendor ID through external EEPROM

■ Digital and analog power separation for better ElectroMagnetic InterFErence (EMI) and ElectroStatic Discharge (ESD) protection

■ Supports hot Plug and Play and remote wake-up of peripherals

■ Supports individual power switching and individual overcurrent protection for downstream ports

■ Supports partial dynamic port-routing capability for downstream ports that allows sharing of the same physical downstream ports between the Original USB host controller and the Hi-Speed USB host controller

■ Uses 12 MHz crystal oscillator to reduce system cost and EMI emissions

■ Supports dual power supply: PCI Vaux(3V3) and VCC

■ Operates at +3.3 V power supply input

■ Low power consumption

■ Full industrial operating temperature range from −40 °C to +85 °C

■ Full-scan design with high fault coverage (93 % to 95 %) ensures high quality

■ Available in LQFP100 package



Applications

■ Digital consumer appliances

■ Notebook

■ PCI add-on card

■ PC motherboard

■ Set-Top Box (STB)

■ Web appliances



 


Part Name(s) : ISP1561 ISP1561BM Philips
Philips Electronics
Description : Hi-Speed USB PCI host controller View

General description

The ISP1561 is a PCI-based, single-chip Universal Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI) core and four transceivers that are compliant with Hi-Speed USB and Original USB. The functional parts of the ISP1561 are fully compliant withUniversal Serial Bus Specification Rev. 2.0,



FEatures

■Complies withUniversal Serial Bus Specification Rev. 2.0

■Supports data transFEr at high-Speed (480 Mbit/s), full-Speed (12 Mbit/s) and low-Speed (1.5 Mbit/s)

■Two Original USB OHCI cores comply withOpen Host Controller Interface Specification for USB Rev. 1.0a

■One Hi-Speed USB EHCI core complies withEnhanced Host Controller Interface Specification for Universal Serial Bus Rev. 0.95

■Supports PCI 32-bit, 33 MHz interface compliant with PCI Local Bus Specification Rev. 2.2with support for the D3coldstandby and wake-up modes; all I/O pins are 3.3 V standard, but 5 V-tolerant

■Compliant withPCI Bus Power Management Interface Specification Rev. 1.1 for all hosts (EHCI and OHCI), and supports all power states:D0, D1, D2, D3hotand D3cold

■Four downstream ports with support for three types of downstream port indicator LEDs:GoodLink™, amber and green LEDs

■CLKRUN support for mobile applications, such as internal notebook design

■Configurable subsystem ID and subsystem Vendor ID through external EEPROM

■Configurable two or four port root hub

■Digital and analog power separation

■Supports hot Plug and Play and remote wake-up of peripherals

■Supports individual power switching and individual overcurrent protection for downstream ports

■Supports partial dynamic port-routing capability for downstream ports that allows sharing of the same physical downstream ports between the Original USB Host Controller and the Hi-Speed USB Host Controller

■Supports legacy PS/2 keyboards and mice

■Uses 12 MHz crystal oscillator to reduce system cost and EMI emissions

■Operates at +3.3 V power supply input

■Full industrial operating temperature range from−40 to+85°C

■Full-scan design with high fault coverage (93% to 95%) ensures high quality

■LQFP128 package available.



Applications

■PC motherboard

■Notebook

■PCI add-on card

■Set-Top Box (STB)

■Web appliance.


Part Name(s) : UPD720102 UPD720102F1-CA7-A UPD720102GC-YEB-A NEC
NEC => Renesas Technology
Description : USB 2.0 HOST CONTROLLER View

The μPD720102 complies with the universal serial bus specification revision 2.0 and open host controller interface specification for full-/low-Speed signaling and Intel's enhanced host controller interface specification for high-Speed signaling and works up to 480 Mbps. The μPD720102 is integrated 2 host controller cores with PCI interface and USB 2.0 transceivers into a single chip.



FEATURES

• Compliant with universal serial bus specification revision 2.0 (data rate: 1.5/12/480 Mbps)

• Compliant with open host controller interface specification for USB release 1.0a

• Compliant with enhanced host controller interface specification for USB revision 1.0

• PCI multi-function device consists of one OHCI host controller core for full-/low-Speed signaling and one EHCI host controller core for high-Speed signaling

• Root hub with 3 (Max.) downstream facing ports which are shared by OHCI and EHCI host controller cores

• All downstream facing ports can handle high-Speed (480 Mbps), full-Speed (12 Mbps), and low-Speed (1.5 Mbps) transaction

• Supports hyper-Speed transFEr mode using HSMODE signal

• 32-bit 33 MHz host interface compliant with PCI specification revision 2.2

• Supports PCI mobile design guide version 1.1

• Supports PCI-bus power management interface specification revision 1.1

• PCI bus bus-master access

• Supports 3.3 V PCI

• System Clock is generated by 30 MHz crystal or 48 MHz Clock input

• Operational registers direct-mapped to PCI memory space

• 3.3 V single power supply, 1.5 V internal operating voltage from on chip regulator

• On chip Rs and Rpd resistors for USB signals



Part Name(s) : MAX14500 MAX14500AEWN MAX14500ETL MAX14501 MAX14501AEWN MAX14501ETL MAX14502 MAX14502AETL MAX14502AEWN MAX14503 MaximIC
Maxim Integrated
Description : Hi-Speed USB-to-SD Card Readers with Bypass View

General Description

The MAX14500–MAX14503 USB-to-SD™ card readers provide a means for portable devices that support full Speed USB communication (12Mbps) with one or two SD card slots, upgrading the USB SD card reader function to USB Hi-Speed (480Mbps) operation. The MAX14500–MAX14503 have two modes of operation: Pass Thru and Card Reader. In pass thru, the SD and USB signals pass through the MAX14500–MAX14503 without modification, appearing like the device is not

present. The host microprocessor firmware does not need modification, as there is no change from the host microprocessor’s perspective. In Card Reader mode, the MAX14500–MAX14503 implement a Hi-Speed USB card reader that operates independently of the host microprocessor. All the capabilities of the full-Speed USB port and SD card slot are preserved with the addi

tional FEature that allows a faster way for a PC to read or write to the SD card. The MAX14500–MAX14503 support SD high capacity SDHC cards. The 40-pin TQFN version supports one SD card, while the 56-bump WLP version supports two SD cards.



FEatures

USB 2.0 Hi-Speed and Full-Speed Compliant

♦SDHC Card Support

♦Internal Hi-Speed USB SD Card Reader Eases Host µP Overhead

♦On-Chip Termination and Pullup Resistors

♦Internal SD Switches Allow For Multiplexing Two SD Cards on a Single-Microprocessor SD Port

♦Accommodates Clock Input Frequencies 26MHz, 19.2MHz, 13MHz, and 12MHz

♦Internal Clock Squarer for Low-Amplitude TCXO Signals

♦No Power-Supply Sequencing Required

♦Compatible with +1.8V to +3.3V I/O Host Microprocessor

♦Simple Control Mode Requires Only a Single GPIO

♦I2C Control Provides Multiple Configuration Options

♦I2C Control Required for Two SD Cards

♦On-Chip Power-On Reset/Brown-Out Reset


Part Name(s) : AU6850B Mvsilicon
Mvsilicon
Description : USB HOST MP3 DECODER SOC View

A highly integrated SOC for MP3 player, AU6850B int egrates MCU, MP3 decoder,  USB Host controller, SD/MMC card  controller, a 16-bit audio decoder and an IR decoder in a single chi p.  Compared with  traditi onal f lash-MP3 player, AU6850B ofFErs a lower cost, lower power consumption,  f lexibl e and more powerf ul host MP3 player soluti on.



 


Part Name(s) : AU6850B ETC
Unspecified
Description : USB Host MP3 Decoder SOC View

[MVSILICON]

Overview
A highly integrated SOC for MP3 player, AU6850B integrates MCU, MP3 decoder, USB Host controller, SD/MMC card controller, a 16-bit audio decoder and an IR decoder in a single chip. Compared with traditional flash-MP3 player, AU6850B ofFErs a lower cost, lower power consumption, flexible and more powerful host MP3 player solution.
   
FEatures
● Low power 0.18um CMOS technology
● Power supply 1.8V/3.3V, power consumption 85mw
● Enhanced 8051, up to 10 times faster than standard 8051
● Dynamic MCU running Clock frequency adjustment to reduce power
    consumption and EMI
USB2.0 full-Speed host controller
● SD/MMC card controller
● Support MPEG 1/2/2.5 layer2/3 decoding, data rate 32kbps ~ 320kbps,
    including VBR
● Support 9 sampling frequency:
    8kHz/11.025kHz/12kHz/16kHz/22.05kHz/24kHz/32kHz/44.1kHz/48kHz
● Embedded sound equalizer
● Support tag format ID3v1 and ID3v2.4
● Support FAT16/FAT32 file system
● Embedded 16-bit sigma-delta audio DAC
● Embedded headphone amplifier
● Support IR Remote control
● GPIO for various purposes
● Embedded LDO 3.3V->1.8V
● Pin to Pin compatible with AU68501
● Embedded 32KB OTP memory for program code storage
   

Part Name(s) : AU6850 AU6850A Mvsilicon
Mvsilicon
Description : USB Host MP3 Decoder SOC View

Overview
A highly integrated SOC for MP3 player, AU6850 integrates MCU, MP3 decoder, USB Host controller, SD/MMC card controller, a 16-bit audio decoder and an IR decoder in a single chip. Besides AU6850 embedded a 32KB OTP memory, which provide an ultra low cost, low power consumption, flexible and more powerful Host MP3 player solution compared with other traditional flash-MP3 player.
   
FEatures
● Low power 0.18um CMOS technology
● Power supply 1.8V/3.3V, power consumption 80mW
● Enhanced 8051, up to 10 times faster than standard 8051
● Dynamic MCU running Clock frequency adjustment to reduce power
    consumption and EMI
USB2.0 full-Speed host controller
● SD/MMC card controller
● Support MPEG 1/2/2.5 layer3 decoding, data rate 32kbps ~ 320kbps, including
    VBR
● Support 9 sampling frequency:
    8kHz/11.025kHz/12kHz/16kHz/22.05kHz/24kHz/32kHz/44.1kHz/48kHz
● Embedded sound equalizer
● Support tag format ID3v1 and ID3v2.4
● Support FAT16/FAT32 file system
● Embedded 16-bit sigma-delta audio DAC
● Embedded headphone amplifier
● Support IR Remote control
● GPIO for various purposes
● Embedded 32KB OTP memory for program code storage
● Support external NOR flash for program code storage (AU6850A only)
● Support in-system debug through external emulator (AU6850A only)
   

Part Name(s) : ISP1563 ISP1563BM Philips
Philips Electronics
Description : Hi-Speed Universal Serial Bus PCI Host Controller View

General description

The ISP1563 is a Peripheral Component Interconnect (PCI)-based, single-chip Universal Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI) core, and four transceivers that are compliant with Hi-Speed USB and Original USB. The functional parts of the ISP1563 are fully compliant with Universal Serial Bus Specification Rev. 2.0, Open Host Controller Interface Specification for USB Rev. 1.0a, Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 1.0, PCI Local Bus Specification Rev. 2.2, and PCI Bus Power Management Interface Specification Rev. 1.1.

The integrated high performance USB transceivers allow the ISP1563 to handle all Hi-Speed USB transFEr Speed modes: high-Speed (480 Mbit/s), full-Speed (12 Mbit/s) and low-Speed (1.5 Mbit/s). The ISP1563 provides four downstream ports, allowing simultaneous connection of USB devices at difFErent Speeds.

The ISP1563 provides downstream port status indicators, green and amber LEDs, to allow user-rich messages of the Root Hub downstream ports status, without requiring detailed port information in the internal registers.



FEatures

■ Complies with Universal Serial Bus Specification Rev. 2.0

■ Supports data transFEr at high-Speed (480 Mbit/s), full-Speed (12 Mbit/s) and low-Speed (1.5 Mbit/s)

■ Two Original USB OHCI cores comply with Open Host Controller Interface Specification for USB Rev. 1.0a

■ One Hi-Speed USB EHCI core complies with Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 1.0

■ Supports PCI 32-bit, 33 MHz interface compliant with PCI Local Bus Specification Rev. 2.2, with support for D3cold standby and wake-up modes; all I/O pins are 3.3 V standard

■ Compliant with PCI Bus Power Management Interface Specification Rev. 1.1 for all hosts (EHCI and OHCI), and supports all power states: D0, D1, D2, D3hot and D3cold

■ Four downstream ports with support for downstream port indicator LEDs: amber and green

■ Configurable two or four port root hubs

■ CLKRUN support for mobile applications, such as internal notebook design

■ Configurable subsystem ID and subsystem Vendor ID through external EEPROM

■ Digital and analog power separation for better EMI and Electro-Static Discharge (ESD) protection

■ Supports hot Plug and Play and remote wake-up of peripherals

■ Supports individual power switching and individual overcurrent protection for downstream ports

■ Supports partial dynamic port-routing capability for downstream ports that allows sharing of the same physical downstream ports between the Original USB Host Controller and the Hi-Speed USB Host Controller

■ Supports legacy PS/2 keyboard and mouse

■ Uses 12 MHz crystal oscillator to reduce system cost and EMI emissions

■ Supports dual power supply: PCI Vaux(3V3) and VCC

■ Operates at +3.3 V power supply input

■ Low power consumption

■ Full industrial operating temperature range from −40 °C to +85 °C

■ Full-scan design with high fault coverage (93 % to 95 %) ensures high quality

■ Available in LQFP128 package.



Applications

■ Digital consumer appliances

■ Notebook

■ PCI add-on card

■ PC motherboard

■ Set-Top Box (STB)

■ Web appliances.



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]