Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : CF5750A CF5750C CF5750D CF5750 NPC
Nippon Precision Circuits
Description : Analog clock CMOS IC View

Analog clock CMOS IC

Part Name(s) : XRD6418 XRD6418BIQ Exar
Exar Corporation
Description : CMOS 10-Bit, 6 MSPS, High Speed Analog-to-Digital Converter with 8:1 Input Analog Multiplexer View

CMOS 10-Bit, 6 MSPS, High Speed Analog-to-Digital Converter with 8:1 Input Analog Multiplexer

Part Name(s) : CF5732 CF5732EA CF5732FA CF5732GA CF5732HA CF5732JA CF5732KA NPC
Nippon Precision Circuits
Description : Analog clock CMOS IC View

OVERVIEW
The CF5732 series are Analog clock driver ICs using 32kHz reference frequency of crystal oscillator. Some versions in accordance with the combinations of each motor drive and alarm output characteristics can provide a wide range of applications for various clock specifications.

FEATURES
- Built-in oscillator Circuits(32.678 kHz)
    On-chip feed back resistors (Rf, Rd)
    Crystal oscillator capacitors (CD, CG)
    Additional 4 capacitors for pace adjustment.
- Debounce circuit (AI terminal)
- Single 1.5 V supply
- Available as a die

Part Name(s) : CF5741 CF5741AA CF5741AB CF5741BA CF5741BB NPC
Nippon Precision Circuits
Description : Analog Clock CMOS IC View

OVERVIEW
The CF5741 series are Analog clock driver ICs using 32.768kHz reference frequency of crystal oscillator. Some versions in accordance with the combinations of each motor drive and alarm output characteristics can provide a wide range of applications for various clock specifications.

FEATURES
■ Operating voltage 1.2 to 2.0V
■ Low current 1.2µA (typ) / 1.5V
■ Built-in oscillator Circuits (32.768 kHz)
■ Built-in crystal oscillator capacitors (CG, CD)
■ Motor output
    Various motor output
■ Alarm output
    Various alarm output
■ Reset function
■ Input debounce function (AI, RST/TC)
■ Chip form (CF5741××)


Part Name(s) : JBT6K47-AS Toshiba
Toshiba
Description : TOSHIBA CMOS Digital Integrated Circuits Silicon Monolithic View

Source Driver for TFT LCD Panels

The JBT6K47-AS is a 64 gray-level, 240-channel-output source driver for TFT LCD panels. 6-bit digital input enable to display colors using internal DA converter and five external power supplies. Also, JBT6K47-AS incorporates power saving function to control recognition of the grayscale data input. When display performance is not necessary, such as in a portable device, JBT6K47-AS ignores the grayscale input data.
Based on high-speed CMOS, the JBT6K47-AS offers both low power consumption and high-speed operation.

Features
● Grayscale data: 18-bit digital (3 outputs × 6 bits) parallel transfer method, selectable write direction
● Panel drive outputs: 240 outputs
● Grayscale levels: Capable of switching 2-grayscale mode and 16 grayscale/64 grayscale mode, and capable of reference Analog voltage inputs.
● High-speed operation: 5 MHz (max)
● Display mode: Normal display mode
● Power supply voltage: Digital power supply voltage (DVDD) .............2.5 to 3.6 V Analog power supply voltage (AVDD)..............4.5 to 5.6 V
● Operating temperature: −20 to 75°C
● Package: Gold bump chip
CMOS process
● Cascading multiple devices

Part Name(s) : HI-8200H HI-8201H HI-8202H HI-8200PSHF HI-8201PSHF HI-8202PSHF HI-8200CRH HI-8201CRH HI-8202CRH HOLTIC
Holt Integrated Circuits
Description : Quad 10 Ohm +/-12V outside-the-rails Analog Switch with High Operating Temperature View

GENERAL DESCRIPTION
The HI-8200H family are quad Analog CMOS switches fabricated with Silicon-on-Insulator (SOI) technology for latch-up free operation and maximum switch isolation. High voltage gate drive is entirely created on-chip enabling +/-12V switching range from a single 3.3V or 5V supply. These switches are ideally suited for applications demanding low switch leakage when the power pins are 0V.
They are optimized for use in high temperature avionics applications. The devices are capable of operating at extended temperature ranges of -55°C to 175°C for plastic packages and -55°C to 200°C for the ceramic CERDIP-16 package.
At 25°C and with VDD from 3.0V to 5.5V, the switch resistance (RON) is typically 8 RON is independent of VDD. In a switch ing range of -5V to +5V, the maximum deviation of RON from flat is less than 5%.
These switches conduct equally well in either direction. Power down and Off state leakages are less than 10nA maximum. Charge injection is less than 10pC. Switching times are typically 180ns to the On state and 60ns to the Off state. The on board charge pump allows an On/Off cycle time of 5KHz for all four switches simultaneously before the switching range becomes restricted.
The HI-8200H provides four each normally open switches when the switch control inputs are low. The HI-8201H provides four each normally closed switches when the switch control in puts are low. The HI-8202H provides a combination of two normally closed and two normally open switches.

FEATURES
• Extended Temperature Ranges
   • -55°C to 175°C (plastic packages)
   • -55°C to 200°C (ceramic CERDIP-16 package)
CMOS Analog switches with up to +/-12V switching range from a single 3.3V or 5V supply
• Low RON: 10 max at 25°C
• Robust CMOS Silicon-on-Insulator (SOI) technology
• Switch nodes are open-circuit when chip is powered down
• SOI switch isolation with 1nA typical Off leakage
• ESD protection > 4KV HBM
• Fast switching time with break-before-make
• Low power

APPLICATIONS
• Down-hole drilling and oil exploration
• High temperature avionics
• Data bus isolation
• Sample-and-Hold Circuits
• Test Equipment
• Communications Systems

Part Name(s) : CF5761 CF5761CA CF5761EA CF5761HA CF5761LB CF5761MB CF5761NB NPC
Nippon Precision Circuits
Description : CMOS Analog Clock IC with Alarm Function View

OVERVIEW
The CF5761 series are Analog clock ICs with alarm functions that derive their timing from a standard 32.768kHz oscillator element. Two kinds of alarm output are available and can be selected using a control pin. The series lineup comprises devices with various alarm patterns and motor outputs for a wide range of clock specifications. They support convenient functions, such as input chattering elimination circuit and power-on clear functions. They are fabricated using Molybdenum-gate CMOS process, realizing low power consumption.

FEATURES
■ 32.768kHz fundamental frequency oscillator
■ Feedback resistor and oscillator capacitor CD built-in
■ Supports various alarms: piezo-alarm, electromagnetic speaker
■ Snooze function
■ Switchable alarm function using SEL pin
■ Alarm auto-stop function (see series lineup)
■ Input chattering elimination circuit (SEL, AI, SN)
■ Test function
■ 1.2 to 3.6V operating supply voltage
■ Molybdenum-gate CMOS process
■ Chip form (CF5761××)

Part Name(s) : DG508AEGE DG509AEGE MaximIC
Maxim Integrated
Description : Monolithic CMOS Analog Multiplexers View

General Description

Maxim’s DG508A and DG509A are monolithic CMOS Analog multiplexers (muxes): the DG508A is a single 8-channel (1-of-8) mux, and the DG509A is a differential 4-channel (2-of-8) mux.

Both devices guarantee break-before-make switching. Maxim guarantees these muxes will not latch up if the power supplies are turned off with the input signals still present. Maxim also guarantees continuous operation when these devices are powered by supplies ranging from ±4.5V to ±18V.



Features

♦ Improved Second Source

♦ Operate from ±4.5V to ±18V Supplies

♦ Symmetrical, Bidirectional Operation

♦ Logic and Enable Inputs, TTL and CMOS Compatible

♦ Latchup-Proof Construction

♦ Monolithic, Low-Power CMOS Design



 


Part Name(s) : CD74HCT4051-Q1 CD74HCT4051QM96Q1 TI
Texas Instruments
Description : High Speed CMOS 8-Channel Analog Multiplexer/Demultiplexer with TTL inputs View

description

This device is a digitally controlled Analog switch that utilizes silicon-gate CMOS technology to achieve operating speeds similar to LSTTL, with the low power consumption of standard CMOS Integrated Circuits. This Analog multiplexer/demultiplexer controls Analog voltages that may vary across the voltage supply range (i.e., VCCto VEE). It is a bidirectional switch that allows any Analog input to be used as an output and vice-versa. The switch has low ON resistance and low OFF leakages. In addition, this device has an enable control that, when high, disables all switches to their OFF state.



Qualification in Accordance With AEC-Q100

Qualified for Automotive Applications

Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval

Wide Analog Input Voltage Range: ±5 V Max

Low ON Resistance

− 70Ω Typical (VCC− VEE= 4.5 V)

− 40Ω Typical (VCC− VEE= 9 V)

Low Crosstalk Between Switches

Fast Switching and Propagation Speeds

Break-Before-Make Switching

Wide Operating Temperature Range: −40°C to 125°C


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]