Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Part name(s)'  

P/N + Description + Content Search

Search Word's :

Part name(s)' : NJW1341 NJW1341VC3
Description : 8input-2output Video Switch with Isolation Amplifier & small AC-coupled Video Driver
JRC
Japan Radio Corporation

■ GENERAL DESCRIPTION
The NJW1341 is 8-Input,2-Output Video Switch.
The NJW1341 consists of Switch and isolation amplifiers(2input) and Video Driver which features small AC-coupled(1output).
All of functions are controlled by I2C Bus.

■ FEATURES
● Operating Voltage 4.5 to 9.5V
● Small AC-coupled Video amplifier (VOUT2)
● Isolation Amplifiers(VIN1,2)
● 8in-2out Video Switch
● Common Mode Rejection Ratio -50dB typ
● Bi-CMOS Technology
● I2C BUS interface
● Package Outline SSOP20-C3

■ APPLICATIONS
● Car AVN
● Any Video System

View
Part name(s)' : ADV7184 ADV7184BSTZ EVAL-ADV7184EB
Description : Multiformat SDTV Video Decoder with Fast Switch Overlay Support
ADI
Analog Devices

GENERAL DESCRIPTION

The ADV7184 integrated Video decoder automatically detects and converts a standard Analog baseband television signal, which is compatible with worldwide standards NTSC, PAL, and SECAM, into 4:2:2 component Video data-compatible with 16-bit or 8-bit CCIR601/CCIR656.



FEATURES

Multiformat Video decoder supports NTSC-(J, M, 4.43), PAL-(B/D/G/H/I/M/N), SECAM

Integrates four 54 MHz, 10-bit ADCs

SCART fast blank support

Clocked from a single 28.63636 MHz crystal

Line-locked clock-compatible (LLC)

Adaptive digital line length tracking (ADLLT™), signal

  processing, and enhanced FIFO management give mini

  TBC functionality

5-line adaptive comb filters

Proprietary architecture for locking to weak, noisy, and unstable Video sources such as VCRs and tuners

Subcarrier frequency lock and status information output

Integrated AGC with adaptive peak white mode

Macrovision® copy protection detection

CTI (chroma transient improvement)

DNR (digital noise reduction)

Multiple programmable Analog input formats

  CVBS (composite Video)

  S-Video (Y/C)

  YPrPb component (VESA, MII, SMPTE, and Betacam)

12 Analog Video input channels

Integrated antialiasing filters

Automatic NTSC/PAL/SECAM identification

Programmable interrupt request output pin


View
Part name(s)' : LM1044 LM1044N
Description : Analog Video Switch
National-Semiconductor
National ->Texas Instruments

General Description

Primarily intended for, but not restricted to, the Switching of Video signals, the LM1044 is a monolithic DC controlled Analog Switch with buffered outputs, allowing the selection of three 5 MHz bandwidth, 6 dB gain channels, or two RGBaSync, 30 MHz bandwidth, 0 dB gain channels. Channel selection is achieved via latched, TTL compatible, logic inputs which may be controlled by microprocessor derived signals. The device is supplied in a 24 pin dual in line plastic package.



Features

Wide RGB bandwidth, typically 30 MHz

High signal to noise ratio, typically 60 dB

Excellent channel isolation typically b60 dB @ 5 MHz

High RGB output currents; typically 4 mA peak

RGB channels may be DC restored or clamped

Logically compatible with the LM1038 stereo audio Switch IC


View
Part name(s)' : AD8113 AD8113JST AD8113-EVAL
Description : Audio/Video 60 MHz 16 x 16, G = +2 Crosspoint Switch
ADI
Analog Devices

PRODUCT DESCRIPTION
The AD8113 is a fully buffered crosspoint Switch matrix that operates on ±12 V for audio applications and ±5 V for Video applications. It offers a –3 dB signal bandwidth greater than 60 MHz and channel Switch times of less than 60 ns with 0.1% settling for use in both Analog and digital audio. The AD8113 operated at 20 kHz has crosstalk performance of –83 dB and isolation of 90 dB. In addition, ground/power pins surround all inputs and outputs to provide extra shielding for operation in the most demanding audio routing applications. The differential gain and differential phase of better than 0.1% and 0.1°, respectively, along with 0.1 dB flatness out to 10 MHz, make the AD8113 suitable for many Video applications.

FEATURES
   16 x 16 High Speed Nonblocking Switch Array
   Serial or Parallel Programming of Switch Array
   Serial Data Out Allows Daisy Chaining Control of
      Multiple 16 x 16s to Create Larger Switch Arrays
   Output Disable Allows Connection of Multiple Devices
      without Loading the Output Bus
   Complete Solution
      Buffered Inputs
      16 Output Amplifiers
      Operates on ±5 V or ±12 V Supplies
      Low Supply Current of 54 mA
   Excellent Audio Performance VS = ±12 V
      ±10 V Output Swing
      0.002% THD @ 20 kHz Max. 20 V p-p (RL = 600 Ω)
   Excellent Video Performance VS = ±5 V
      10 MHz 0.1 dB Gain Flatness
      0.1% Differential Gain Error (RL = 1 kΩ)
      0.1° Differential Phase Error (RL = 1 kΩ)
   Excellent AC Performance
      –3 dB Bandwidth 60 MHz
   Low All Hostile Crosstalk of
      –83 dB @ 20 kHz
   Reset Pin Allows Disabling of All Outputs (Connected
      to a Capacitor to Ground Provides Power-On
      Reset Capability)
   100-Lead LQFP (14 mm x 14 mm)

APPLICATIONS
   Analog/Digital Audio Routers
   Video Routers (NTSC, PAL, S-Video, SECAM)
   Multimedia Systems
   Video Conferencing
   CCTV Surveillance

View

Part name(s)' : ADV7188 ADV7188BSTZ EVAL-ADV7188EB
Description : Multiformat SDTV Video Decoder with Fast Switch Overlay Support
ADI
Analog Devices

GENERAL DESCRIPTION

The ADV7188 integrated Video decoder automatically detects and converts standard Analog baseband television signals compatible with worldwide NTSC, PAL, and SECAM standards into 4:2:2 component Video data compatible with 20-/16-/10-/8-bit CCIR 601/CCIR 656.



FEATURES

Multiformat Video decoder supports NTSC (J/M/4.43), PAL (B/D/G/H/I/M/N), SECAM

Integrates four 54 MHz, Noise Shaped Video (NSV®), 12-bit ADCs

SCART fast blank support

Clocked from a single 28.63636 MHz crystal

Line-locked clock-compatible (LLC)

Adaptive Digital Line Length Tracking (ADLLT™), signal processing, and enhanced FIFO management give mini-TBC functionality

5-line adaptive comb filters

Proprietary architecture for locking to weak, noisy, and unstable Video sources such as VCRs and tuners

Subcarrier frequency lock and status information output

Integrated automatic gain control (AGC) with adaptive peak white mode

Macrovision® copy protection detection

Chroma transient improvement (CTI)

Digital noise reduction (DNR)

Multiple programmable Analog input formats

   CVBS (composite Video)

   Y/C (S-Video)

   YPrPb (component) (VESA, MII, SMPTE, and BETACAM)

12 Analog Video input channels

Integrated antialiasing filters

Programmable interrupt request output pin

Automatic NTSC/PAL/SECAM identification

Digital output formats (8-bit, 10-bit, 16-bit, or 20-bit) ITU-R BT.656 YCrCb 4:2:2 output + HS, VS, and FIELD

0.5 V to 1.6 V Analog signal input range

Differential gain: 0.4% typical

Differential phase: 0.4° typical

Programmable Video controls Peak white/hue/brightness/saturation/contrast

Integrated on-chip Video timing generator

Free-run mode (generates stable Video output with no input)

VBI decode support for close captioning (including Gemstar® 1×/2× (XDS)), WSS, CGMS, teletext, VITC, VPS

Power-down mode

2-wire serial MPU interface (I2C® compatible)

3.3 V Analog, 1.8 V digital core, 3.3 V input/output supply

Industrial temperature grade: −40°C to +85°C

80-lead, Pb-free LQFP



APPLICATIONS

High end DVD recorders

Video projectors

HDD-based PVRs/DVDRs

LCD TVs

Set-top boxes

Professional Video products

AVR receiver


View
Part name(s)' : AD8176-EVAL
Description : 475 MHz, Triple 16 × 9 Video Crosspoint Switch
ADI
Analog Devices

GENERAL DESCRIPTION
The AD8176 is a high speed, triple 16 × 9 Video crosspoint Switch matrix. It supports 1600 × 1200 RGB displays @ 85 Hz refresh rate, by offering a 475 MHz bandwidth and a slew rate of 1800 V/μs. With −68 dB of crosstalk and TBD dB isolation (@ 5 MHz), the AD8176 is useful in many high speed Video applications.

FEATURES
   Large, triple 16 x 9 high speed, non-blocking Switch array
   Differential or single-ended operation
   Supports sync-on common-mode and sync-on color
      operating modes
   RGB and HV outputs available for driving monitor directly
   G = +4 operation (differential input to differential output)
   Flexible power supplies: +5 V or ±2.5 V
      Logic ground for convenient control interface
   Serial or parallel programming of Switch array
   High impedance output disable allows connection of
      multiple devices with minimal loading on output bus
   Adjustable output CM and black level through external pins
   Excellent ac performance
      Bandwidth: 475 MHz
      Slew rate: 1800 V/μs
      Settling time TBD ns to 1% to support 1600 × 1200 @ 85Hz
   Low power of 3.5 W
   Low all-hostile crosstalk
      −68 dB @ 5 MHz
      −40 dB @ 500 MHz
   Wide input common-mode range of 4 V
   Reset pin allows disabling of all outputs
   Fully populated 26 x 26 ball PBGA package
      (27 mm x 27 mm, 1 mm ball pitch)
   Convenient grouping of RGB signals for easy routing

APPLICATIONS
   RGB Video Switching
   KVM
   Professional Video

View
Part name(s)' : STV6417
Description : Audio/Video Switch and 6-channel SD Video filter
ST-Microelectronics
STMicroelectronics

Description

The STV6417 is an I²C-controlled integrated circuit designed to Switch both audio and Video in any dual full-SCART application such as set-top boxes or DVD recorders for European markets.

The STV6417 is one of the four brand new products that complete the new generation of audio and Video Switches from STMicroelectronics, which cover both technically and price wise the whole market spectrum from low-cost SD retail (zapper set-top box or basic recorder) up to DVR HD operator (set-top boxes or recorders with component outputs).


View
Part name(s)' : AD8177 AD8177-EVALZ AD8177ABPZ
Description : 500 MHz, Triple 16 × 5 Video Crosspoint Switch
ADI
Analog Devices

GENERAL DESCRIPTION
The AD8177 is a high speed, triple 16 × 5 Video crosspoint Switch matrix. It supports 1600 × 1200 RGB displays @ 85 Hz refresh rate by offering a 500 MHz bandwidth and a slew rate of 1800 V/μs. With −88 dB of crosstalk and −94 dB isolation (@ 5 MHz), the AD8177 is useful in many high speed Video applications.

FEATURES
   High channel count, triple 16 × 5 high speed, nonblocking
      Switch array
   Pin compatible with AD8175/AD8176 (16 × 9 Switch arrays)
      and AD8178 (16 × 5 Switch array)
   Differential or single-ended operation
   Supports sync-on common-mode and sync-on color
      operating modes
   Decoded HV sync outputs available
   G = +2 operation (differential input to differential output)
   Flexible power supplies: +5 V or ±2.5 V
      Logic ground for convenient control interface
   Serial or parallel programming of Switch array
   High impedance output disable allows connection of
      multiple devices with minimal loading on output bus
   Adjustable output CM and black level through external pins
   Excellent ac performance (to support 1600 × 1200 @ 85 Hz)
      Bandwidth: 500 MHz
      Slew rate: 1800 V/μs
      Settling time: 4 ns to 1%
   Low power of 2.3 W
   Low all-hostile crosstalk
      −88 dB @ 5 MHz
      −46 dB @ 500 MHz
   Wide input common-mode range of 4 V
   Reset pin allows disabling of all outputs
   Fully populated 26 × 26 ball PBGA package
      (27 mm × 27 mm, 1 mm ball pitch)
   Convenient grouping of RGB signals for easy routing

APPLICATIONS
   RGB Video Switching
   KVM
   Professional Video

View
Part name(s)' : MT88V32AP MT88V32
Description : 8 x 4 High Performance Video Switch Array
Mitel
Mitel Networks

Description
The MT88V32 is a digitally programmable (TTL levels) 8×4 crosspoint Switch that is designed to control wideband Analog (Video) signal.
Each of the 32 nodes of the Switching matrix has a TSwitch, see Fig.1. This grounds the nodes of all open connections, which greatly reduces feedthrough noise. In order to reduce crosstalk, individual Analog signal lines are isolated by interleaving them with ground lines.

Features
• 32 bidirectional CMOS "T" Switches in an 8×4 non-blocking array
• Break-before-make Switching configuration
• Fast setup & hold times for Switch programming
• 3dB bandwidth of 200MHz
• Low feedthrough and crosstalk, better than -80dB at 5MHz
• Very low differential gain and phase errors
• 12Vpp bipolar signal capability
• On-state resistance 75Ω (max) for VDD=+5V, VEE=-7V
Switch control through 2-stage latches
• Orthogonal Xi and Yi pin connections for optimized PCB layout
• Latch readback capability for monitoring

Applications
• High-end Video routing and Switching
• Medical instrumentation
• Automatic test equipment (ATE)
• Multi-media communication

View
12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]