Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : ADG751ARM ADG751ART ADG751BRM ADG751BRT ADI
Analog Devices
Description : CMOS, Low Voltage RF/Video, SPST Switch View

GENERAL DESCRIPTION
The ADG751 is a Low Voltage SPST (single pole, single throw) Switch. It is constructed in a T-Switch configuration, which results in excellent Off Isolation while maintaining good frequency response in the ON condition.

FEATURES
    High Off Isolation –75 dB at 100 MHz
    –3 dB Signal Bandwidth 300 MHz
    +1.8 V to +5.5 V Single Supply
    Low On-Resistance (15 V)
    Fast Switching Times
        tON Typically 9 ns
        tOFF Typically 3 ns
    Typical Power Consumption <0.01 mW
    TTL/CMOS Compatible

APPLICATIONS
    Audio and Video Switching
    RF Switching
    Networking Applications
    Battery Powered Systems
    Communication Systems
    Relay Replacement
    Sample-and-Hold Systems

Part Name(s) : ADG751 ADG751ARMZ ADG751ARMZ-REEL ADG751ART-REEL ADG751ART-REEL7 ADG751ARTZ-REEL7 ADG751BRMZ-REEL ADG751BRT-REEL ADG751BRT-REEL7 ADG751BRTZ-REEL7 ADI
Analog Devices
Description : CMOS, Low Voltage RF/Video, SPST Switch View

GENERAL DESCRIPTION
The ADG751 is a Low Voltage SPST (single pole, single throw) Switch. It is constructed in a T-Switch configuration, which results in excellent Off Isolation while maintaining good frequency response in the ON condition.

FEATURES
    High Off Isolation –75 dB at 100 MHz
    –3 dB Signal Bandwidth 300 MHz
    +1.8 V to +5.5 V Single Supply
    Low On-Resistance (15 V)
    Fast Switching Times
        tON Typically 9 ns
        tOFF Typically 3 ns
    Typical Power Consumption <0.01 mW
    TTL/CMOS Compatible

APPLICATIONS
    Audio and Video Switching
    RF Switching
    Networking Applications
    Battery Powered Systems
    Communication Systems
    Relay Replacement
    Sample-and-Hold Systems

Part Name(s) : PI3A125 PI3A125CX PI3A125TX Pericom-Semiconductor
Pericom Semiconductor
Description : SOTINY™ Low Voltage SPST Analog Switch/Bus Switch View

Description

The PI3A125 is a high-speed CMOS SPST Switch that can be used in analog or Low-delay bus Switch applications.

Specified over a wide operating power supply Voltage range, 2.3V to 3.6V, the PI3A125 has a Low maximum ON resistance of 10-ohm at 2.3V and 7 ohms at 3V. The CMOS device features rail-to-rail signal range. The Switch is turned off when the OE input is high. Power requirements at 3V are a Low 30µW.

The PI3A125 is an improved, direct replacement for the SN74CBTLV1G125. Pericom improvements include Lower resistance and detailed analog Switch specifications.



Features

Low Voltage, SPST Switch

   – VCC from 2.3V to 3.6V

Low On-Resistance: 6 ohms at 3.0V

• CMOS Technology for Bus and Analog Applications

• Rail-to-Rail Signal Range

Low Power: 30µW at 3.0V

• High Speed: 4ns

• High Off Isolation: 65dB at 1MHz

• High Bandwidth: 250MHz

• Extended Industrial Temperature Range: -40°C to 85°C

• Improved, Direct Replacement for SN74CBTLV1G125

• Packaging:

   - 5-pin SC70 (C)

   - 5-pin SOT-23 (T)



Applications

• Cell Phones

• Computer Peripherals

• Bus Isolation

• Servers/Routers

• Data Communications

• PDAs

• Portable Instrumentation

• Battery Powered Communications



 


Part Name(s) : FSA266 FSA266K8X FSA266L8X NC7WB66 NC7WB66K8X NC7WB66L8X Fairchild
Fairchild Semiconductor
Description : Low Voltage Dual SPST Normally Open Analog Switch or 2-Bit Bus Switch View

General Description

The FSA266 or NC7WB66 is an ultra high-speed (UHS) dual single-pole/single-throw (SPST) analog Switch or 2-bit bus Switch. The device is fabricated with advanced sub-micron CMOS technology to achieve high speed enable and disable times and Low On Resistance over a broad VCC range. The device is specified to operate over the 1.65 to 5.5V VCC operating range. The device is organized as a dual Switch with independent CMOS compatible Switch enable (OE) controls. When OE is HIGH, the Switch is ON and Port A is connected to Port B. When OE is Low, the Switch is OPEN and a high-impedance state exists between the two ports. The enable inputs tolerate Voltages up to 5.5V independent of the VCC operating range.



Features

■ Useful in both analog and digital applications

■ Space saving US8 surface mount package

■ MicroPak Pb-Free leadless package

■ Typical 7Ω On Resistance @ 5V VCC

■ Broad VCC operating range: 1.65V to 5.5V

■ Rail-to-Rail signal handling

■ Power down high impedance control inputs

■ Control inputs are overVoltage tolerant

■ Control inputs are CMOS compatible

■ >300 MHz -3dB bandwidth



 



Part Name(s) : MAX395C/D MAX395CNG MAX395CWG MAX395ENG MAX395EWG MAX395MRG MAX395 MaximIC
Maxim Integrated
Description : Serially Controlled, Low-Voltage, 8-Channel SPST Switch View

General Description
The MAX395 8-channel, serially controlled, single-pole/single-throw (SPST) analog Switch offers eight separately controlled Switches. The Switches conduct equally well in either direction. On-resistance (100Ω max) is matched between Switches to 5Ω max and is flat (10Ω max) over the specified signal range.

Features
♦ SPI™/QSPI™, Microwire™-Compatible Serial Interface
♦ 8 Separately Controlled SPST Switches
♦ 100Ω Signal Paths with ±5V Supplies
♦ Rail-to-Rail Signal Handling
♦ Asynchronous RESET Input
♦ Pin Compatible with Industry-Standard MAX335
♦ ±2.7V to ±8V Dual Supplies +2.7V to +16V Single Supply
♦ >2kV ESD Protection per Method 3015.7
♦ TTL/CMOS-Compatible Inputs (with +5V or ±5V Supplies)

Applications
    Serial Data-Acquisition Systems
    Avionics
    Audio Signal Routing
    Industrial and Process Control Systems
    ATE Equipment
    Networking

Part Name(s) : ADG801 ADG802 ADG801BRT ADG801BRM ADG802BRT ADG802BRM AD
Analog Devices
Description : <0.5 Ω CMOS, Low Voltage, SPST Switches View

GENERAL DESCRIPTION
The ADG801/ADG802 are monolithic CMOS SPST (Single Pole, Single Throw) Switches with On Resistance of less than 0.5Ω. These Switches are designed on an advanced submicron process that provides extremely Low on resistance, high Switching speed and Low leakage currents.
   
FEATURES
    Low On Resistance < 0.5 Ω max at 5 V supply
    0.1 Ω On Resistance Flatness
    +1.8 V to +5.5 V Single Supply
    100pA Leakage Currents
    14ns Switching Times
    Extended Temperature Range -40°C to +125°C
    High Current Carrying Capability
    Tiny 6 lead SOT23 and 8 Lead µSOIC Packages
    Low Power Consumption
    TTL/CMOS Compatible Inputs
    Pin Compatible with ADG701/ADG702
   
APPLICATIONS
    Power Routing
    Audio and Video Signal Routing
    Cellular Phones
    Modems
    PCMCIA Cards
    Hard Drives
    Data Acquisition Systems
    Communication Systems
    Relay replacement
    Audio and Video Switching
    Battery Powered Systems
   

Part Name(s) : NC7SZ66 NC7SZ66L6X NC7SZ66M5X NC7SZ66P5X Fairchild
Fairchild Semiconductor
Description : Low Voltage Single SPST Normally Open Bus Switch View

Description

The NC7SZ66 is a ultra high-speed (UHS) CMOS compatible single-pole/single-throw (SPST) bus Switch.

The Low on resistance of the Switch alLows inputs to be connected to out-puts with minimal propagation

delay and without generating additional ground bounce noise. The device is organized as a 1- bit Switch with a Switch enable (OE) signal. When OE is HIGH, the Switch is on and port A is connected to port B. When OE is Low, the Switch is open and a high-impedance state exists between the two ports..



Fatures

Broad VCC Operating Range: 1.65V to 5.5V

Rail-to-Rail Signal Handling

Power Down High-Impedance Inputs/Outputs

5Ω Switch Connection between Two Ports

Minimal Propagation Delay through the Switch

Low ICC

Zero Bounce in FLow-Through Mode

Control Input Compatible with CMOS Input Levels

Ultra-Small MicroPak™ Packages

Space-Saving SOT23 and SC70 Packages


Part Name(s) : 4246-00 4246-01 4246-02 4246-51 4246-52 PE4246 PE4246-EK PEREGRINE
Peregrine Semiconductor Corp.
Description : Absorptive SPST UltraCMOS™ RF Switch: DC - 5000 MHz View

Product Description

The PE4246 RF Switch is designed to cover a broad range of applications from DC to 5000 MHz. It is non-reflective at both RF1 and RF2 ports. This SPST Switch integrates a single-pin CMOS control interface, and provides Low insertion loss while operating with extremely Low bias from a single +3-volt supply. In a typical application, the high isolation PE4246 can replace multiple RF Switches of lesser isolation performance. It is offered in a small 3x3 mm DFN package.



Features

• Non-reflective 50-ohm RF Switch

• 50-ohm (0.25 watt) terminations

• High isolation: 55 dB at 1000 MHz, 48 dB at 3000 MHz

Low insertion loss: 0.8 dB at 1000 MHz, 0.9 dB at 3000 MHz

• High linearity: +33 dBm input 1dB compression point

• CMOS/TTL single-pin control

• Single +3-volt supply operation

• Extremely Low bias: 33 µA @ 3 V

• Available in a 6-lead DFN package



 


Part Name(s) : HI-201 HI0-0201-6 HI1-0201-2 HI1-0201-5 HI1-0201-9 HI3-0201-5 HI3-0201-9 HI4-0201-8 HI6-0201-5 HI6-0201-9 MaximIC
Maxim Integrated
Description : Quad SPST CMOS Analog Switch View

Quad SPST CMOS Analog Switch

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]