P/N + Description + Content Search


1 2 3 4 5 6 7 8 9 10 Next

Part Name(s) : C2741-03
Description : INFRARED VIDICON CAMERA
Hamamatsu
Hamamatsu Photonics

The C2741-03 is a high-performance video camera with various functions that have been developed for image processing and measurement purposes. The camera has sensitivity to 1800 nm from a visible wavelength region. Compared with conventional surveillance cameras, this camera excels in resolution, image distortion, stability, etc.



FEATURES

● Sensitivity to 1800 nm from visible wavelength region

● Image processing and measurement

● Contrast enhancement function


View
Part Name(s) : CXA1439M
Description : CDS for CCD camera
Sony
Sony Semiconductor

Description
The CXA1439M is an IC for CDS (Correlated Double Sampling) to be used in a CCD camera.

View
Part Name(s) : HI3516
Description : Hi3516 IPC Solution with Dual Sensors
ETC1
Unspecified

Hi3516 Full-HD IP Camera SoC



As the surveillance mode switched from the analog CCTV to DVR, networking, high definition, and intelligence gradually became essential features required in the development trend. The requirements on the high-performance (HP) IP camera are also defined. The Hi3516 is a professional high-end SoC based on the HP IP camera application. ( www.hisilicon.com )




View
Part Name(s) : C4880-80 C4880-80-12A C4880-80-14A C4880-80-22A C4880-80-24A
Description : Fast Scan Multi Format Cooled CCD Camera
Hamamatsu
Hamamatsu Photonics

Fast Scan Multi Format Cooled CCD  Camera



These low noise/high frame rate camera systems maintain the superb noise characteristic of the conventional cooled CCD camera, while at the same time adding high speed.



❚ FEATURES

● Progressive scan interline CCD used with no mechanical shutter

● Two scan modes as well as sub-array and binning functions available

● Maximum frame rate of up to approximately 500 frames/sec

● Fast scan readout with low noise

● Full computer control



❚ APPLICATIONS

● Faint light observation under a microscope

● Continuous imaging of high-speed moving objects

● Kinetic changes in light intensity


View

Part Name(s) : 88ALP01 88ALP01-XX-TFJ1C000
Description : PCI to NAND, SD and Camera Host Controller
Marvell
Marvell Semiconductor

Overview

The Marvell® single-chip 88ALP01 triple function device integrates a NAND flash controller (with Reed-Solomon ECC), an SD/SDIO controller, and a CMOS Camera Module Interface Controller (CCIC). The device is ideally suited for laptop computing devices and other embedded applications.


View
Part Name(s) : NJM2110 NJM2110M NJM2110V
Description : MONAURAL MIC AMP. for VIDEO CAMERA
JRC
Japan Radio Corporation

■ GENERAL DESCRIPTION

NJM2110 is a monaural microphone amplifier for video camera. It can operate from 2.7V. The performance is low Operating current and small package, therefore it is easy to design the downsizing and low consumption.



■ FEATURES

● Operating Voltage ( 2.7V~5.3V )

● Low Operating Current ( V+=5V : 3.5mA typ. )

                                  ( V+=3.3V : 1.1mA typ. )

● Short Circuit Protection for External MIC.

● Package Outline DMP8, SSOP8

● Bipolar Technology



■ APPLICATION

● Video Camera


View
Part Name(s) : NJM2110 NJM2110M NJM2110V
Description : MONAURAL MIC AMP. for VIDEO CAMERA
NJRC
Japan Radio Corporation

■ GENERAL DESCRIPTION

NJM2110 is a monaural microphone amplifier for video camera. It can operate from 2.7V. The performance is low Operating current and small package, therefore it is easy to design the downsizing and low consumption.



■ FEATURES

● Operating Voltage ( 2.7V~5.3V )

● Low Operating Current ( V+=5V : 3.5mA typ. )

                                  ( V+=3.3V : 1.1mA typ. )

● Short Circuit Protection for External MIC.

● Package Outline DMP8, SSOP8

● Bipolar Technology



■ APPLICATION

● Video Camera


View
Part Name(s) : MM5321
Description : MM5321 TV Camera Sync Generator
National-Semiconductor
National ->Texas Instruments

The MM5321 TV camera sync generator is a MOS, P-channel enhancement mode.

 





Acquired by Texas Instruments on September 23rd, 2011.


View
Part Name(s) : AD5801
Description : Piezo-Electric Actuator Controller
ADI
Analog Devices

GENERAL DESCRIPTION

The AD5801 is a high efficiency ultrasonic motor controller with two Class D-type output drivers. These Class D-type drivers can be used independently or configured as an H-bridge driver, and have full pattern programmability. There are also six integrated drivers which can be operated independently and have programmable output patterns. The AD5801 also has integrated drivers which are programmable from 130mA to 200mA, and may be used for a combination of Shutter and NDF/IRIS control.

The operation modes of the drivers are invoked by the AD5801 using an I2C compatible interface.



FEATURES

Two Efficient Class D-type Amplifiers

Six Integrated Pattern Drivers

Programmable Output Drive Patterns

12-bit ADC Voltage or Current Sensing for Position Feedback

Programmable Shutter Control

On board temperature sensing

Optional Off-board Temperature Sensing

32-lead 5mm X 5mm LFCSP Package



APPLICATIONS

Camera Phones

Piezoelectric Positioning

Piezo Actuators

Lens Auto focus

Lens Zoom

Iris/Exposure

NDF Neutral density Filter

Shutter

Camera Phone

Camera Enabled PDA

Camera/Image Modules

Digital Still Camera DSC

Web Cameras

Security Cameras

Digital Camcorders


View

1

2345678910 Next

 


한국어    日本語    русский    简体中文    español
@ 2015 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]