Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : KTA2400 TGS
Tiger Electronic
Description : Differential Amplifier Application View

Features
● Matched Prais for Differential Amplifier.
● High Breakdown Voltage:Vceo=-120V(Min)
● Complementary to KTC3400.

Part Name(s) : 2SB688 B688 UTC
Unisonic Technologies
Description : HIGH POWER Amplifier Application View

PNP EPITAXIAL SILICON TRANSISTOR



HIGH POWER Amplifier Application





* Complementary to 2SD718.



* Recommended for 45 ~ 50W Audio Frequency Amplifier Output Stage.


Part Name(s) : NJM2795 NJM2795V JRC
Japan Radio Corporation
Description : Ground noise isolation Amplifier with Adjustable Differential Gain View

GENERAL DESCRIPTION
The NJM2795 is a ground noise isolation Amplifier. It contains dual channel Differential Amplifier with Adjustable Differential Gain.
It is developed for those car audio Applications where long connections between head unit and other components are necessary and ground noise has to be eliminated.
Further the NJM2795 allow the user to alter the gain to optimize the signal-to-noise ratio of their system. It is useful in microphone Amplifier Applications.

FEATURES
• Dual Channel Differential Amplifier
• Adjustable Differential Gain +6dB to +52dB
• Operating Voltage 4.3 to 20V
• Operating Current 7mA typ.
• Maximum Output Voltage 2Vrms min., @ THD=1%
• Common mode rejection ratio80dB typ.
• Supply Voltage Rejection Ratio 65dB typ.
• Total Harmonic Distortion 0.005% typ.
• Equivalent Input Noise Voltage 2µVrms typ. @ Gv=+20dB
• Bipolar Technology
• Package Outline SSOP14

Part Name(s) : INA106 INA106KP INA106U BB
Burr-Brown -> Texas Instruments
Description : Precision Gain = 10 Differential Amplifier View

DESCRIPTION
The INA106 is a monolithic Gain = 10 Differential Amplifier consisting of a precision op amp and on-chip metal film resistors. The resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistors maintains gain accuracy and common-mode rejection over temperature.
The Differential Amplifier is the foundation of many commonly used circuits. The INA106 provides this precision circuit function without using an expensive resistor network. The INA106 is available in 8-pin plastic DIP and SO-8 surface-mount packages.

FEATURES
● ACCURATE GAIN: ±0.025% max
● HIGH COMMON-MODE REJECTION:
   86dB min
● NONLINEARITY: 0.001% max
● EASY TO USE
● PLASTIC 8-PIN DIP, SO-8 SOIC
   PACKAGES

ApplicationS
● G = 10 Differential Amplifier
● G = +10 Amplifier
● G = –10 Amplifier
● G = +11 Amplifier
● INSTRUMENTATION Amplifier


Part Name(s) : TDA9901TS TDA9901 Philips
Philips Electronics
Description : Wideband Differential digital controlled variable gain Amplifier View

GENERAL DESCRIPTION
The TDA9901 is a wideband, low noise Amplifier with Differential inputs and outputs. The TDA9901 incorporates an AGC function with digital control. The TDA9901 is optimized for fast switching between different gain settings, preserving small phase and amplitude error.

FEATURES
• 130 MHz, −3 dB small signal bandwidth
• Digitally controlled gain
• TTL/CMOS compatible digital inputs (3.3 or 5 V)
• TTL single ended or Differential clock input with PECL compatibility
• 24 dB gain control range
• Five steps of 6 dB plus 6 dB fixed gain
• 30 dB gain maximum
• High impedance Differential inputs
• Low impedance Differential outputs
• High power supply rejection
• 125 nV/√Hz output voltage noise density at 30 dB gain
• Fast gain settling
• Dual control modes: transparent or latched.

ApplicationS
• Linear AGC systems
• IF Amplifier in IF conversion systems (e.g. base stations or satellite receivers)
• Instrumentation
• Multi-purpose Amplifier
• Driver for Differential ADCs (e.g. TDA8768).

Part Name(s) : INA106 INA106KP INA106KPG4 INA106U INA106U/2K5 INA106UE4 TI
Texas Instruments
Description : Precision Gain = 10 Differential Amplifier View

DESCRIPTION
The INA106 is a monolithic Gain = 10 Differential Amplifier consisting of a precision op amp and on-chip metal film resistors. The resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistors maintains gain accuracy and common-mode rejection over temperature.
The Differential Amplifier is the foundation of many commonly used circuits. The INA106 provides this precision circuit function without using an expensive resistor network. The INA106 is available in 8-pin plastic DIP and SO-8 surface-mount packages.

FEATURES
● ACCURATE GAIN: ±0.025% max
● HIGH COMMON-MODE REJECTION:
   86dB min
● NONLINEARITY: 0.001% max
● EASY TO USE
● PLASTIC 8-PIN DIP, SO-8 SOIC
   PACKAGES

ApplicationS
● G = 10 Differential Amplifier
● G = +10 Amplifier
● G = –10 Amplifier
● G = +11 Amplifier
● INSTRUMENTATION Amplifier

Part Name(s) : CA3028A CA3028AE CA3028AM CA3028AM96 Intersil
Intersil
Description : Differential/Cascode Amplifier for Commercial and Industrial Equipment from DC to 120MHz View

The CA3028A is a Differential/cascode Amplifier designed for use in communications and industrial equipment operating at frequencies from DC to 120MHz.



Features

• Controlled for Input Offset Voltage, Input Offset Current and Input Bias Current

• Balanced Differential Amplifier Configuration with Controlled Constant Current Source

• Single-Ended and Dual-Ended Operation



Applications

• RF and IF Amplifiers (Differential or Cascode)

• DC, Audio and Sense Amplifiers

• Converter in the Commercial FM Band

• Oscillator

• Mixer

• Limiter


Part Name(s) : INA105 INA105AM INA105BM INA105KP INA105KU INA105KU/2K5 BB
Burr-Brown -> Texas Instruments
Description : Precision Unity Gain Differential Amplifier View

DESCRIPTION

The INA105 is a monolithic Gain = 1 Differential Amplifier consisting of a precision op amp and on-chip metal film resistors. The resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistors maintains gain accuracy and common-mode rejection over temperature.



FEATURES

●CMR 86dB min OVER TEMPERATURE

●GAIN ERROR: 0.01% max

●NONLINEARITY: 0.001% max

●NO EXTERNAL ADJUSTMENTS REQUIRED

●EASY TO USE

●COMPLETE SOLUTION

●HIGHLY VERSATILE

●LOW COST

●PLASTIC DIP, TO-99 HERMETIC METAL, AND SO-8 SOIC PACKAGES



ApplicationS

Differential Amplifier

●INSTRUMENTATION Amplifier BUILDING BLOCK

●UNITY-GAIN INVERTING Amplifier

●GAIN-OF-1/2 Amplifier

●NONINVERTING GAIN-OF-2 Amplifier

●AVERAGE VALUE Amplifier

●ABSOLUTE VALUE Amplifier

●SUMMING Amplifier

●SYNCHRONOUS DEMODULATOR

●CURRENT RECEIVER WITH COMPLIANCE TO RAILS

●4mA TO 20mA TRANSMITTER

●VOLTAGE-CONTROLLED CURRENT SOURCE

●ALL-PASS FILTERS


Part Name(s) : TDA9901TS TDA9901 NXP
NXP Semiconductors.
Description : Wideband Differential digital controlled variable gain Amplifier View

General description
The TDA9901 is a wideband, low-noise Amplifier with Differential inputs and outputs. The TDA9901 incorporates an Automatic Gain Control (AGC) function with digital control. The TDA9901 is optimized for fast switching between different gain settings, preserving small phase and amplitude error.

Features
■ 130 MHz, −3 dB small signal bandwidth
■ Digitally controlled gain
■ Transistor-Transistor Logic (TTL) and CMOS compatible digital inputs (3.3 V or 5 V)
■ TTL single-ended or Differential clock input with Positive Emitter-Coupled Logic (PECL) compatibility
■ 24 dB gain control range
■ Four steps of 6 dB plus 6 dB fixed gain
■ 30 dB gain maximum
■ High impedance Differential inputs
■ Low impedance Differential inputs
■ High power supply rejection
■ 125 nV/√Hz output voltage noise density at 30 dB gain
■ Fast gain settling
■ Dual control modes: transparent or latched

Applications
■ Linear AGC systems
■ Wireless infrastructure
■ Fixed network
■ Instrumentation
■ Multipurpose Amplifier
■ Driver for Differential ADCs (e.g. ADC1206S040/055/070 and ADC1006055/070)

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]