Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Part Name(s) : SMCJ5.0A_09
Littelfuse
Littelfuse, Inc
Description : Transient Voltage Suppression Diodes

Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series

Part Name(s) : 30KPA
Littelfuse
Littelfuse, Inc
Description : Transient Voltage Suppression Diodes

Description

The 30KPA Series is designed specifically to protect sensitive electronic equipment from Voltage Transients induced by lightning and other Transient Voltage events.



Applications

  TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.



 


Part Name(s) : HIP1090AS HIP1090
Intersil
Intersil
Description : Protected High Side Power Switch With Transient Suppression

Description
The HIP1090 is a Protected Power Interface Switch designed to suppress potentially damaging over-Voltage Transients With peak Voltage source inputs ranging up to ±90V in amplitude. I

Features
• ±90V Transient Suppression
• 4V to 16V Operating Voltage
• 1A Current Load Capability
• Low Input-Output Voltage Drop With Controlled Saturation Detector for
    - Fast Low Current Turn-OFF
    - Reduced No-Load Idle Current
• Over-Voltage Shutdown Protection
• Short Circuit Current Limiting
• Over-Temperature Limiting Protected
• Thermal Limiting at TJ = +150oC
• -40oC to +125oC Operating Temperature Range

Applications
• Electronic Circuit Breaker
Transient Suppressor
• Over-Voltage Monitor
• High Side Driver Switch for
    - Relays
    - Solenoids
    - Heaters
    - Motors
    - Lamps

Part Name(s) : P4KE
Littelfuse
Littelfuse, Inc
Description : Transient Voltage Suppression Diodes

Description

The P4KE Series is designed specifically to protect sensitive electronic equipment from Voltage Transients induced by lightning and other Transient Voltage events.



Features

• Halogen-free

• Rohs compliant

• Typical maximum temperature coefficient

• ΔVBR =0.1%xVBR@25°C x ΔT

• Glass passivated Chip junction in P600 package

• 400W peak pulse capadility at 10x1000μs waveform,repetition rate (duty cycles):0.01%

• Fast response time:typically less than 1.0ps from 0 Volts to BV min

• Excellent clamping capability

• Low incremental surge resistance

• Typical IR less than 5μA above 11V

• High temperature soldering guaranteed: 260°C/40 seconds / 0.375”, (9.5mm) lead length, 5lbs., (2.3kg)tension

• Plastic package has underwriters laboratory flammability classification 94v-0

• Matte Tin Lead–free plated



Applications

  TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.



 


Motorola
Motorola => Freescale
Description : 4-Bit Differential ECL Bus/TTL Bus Transceiver

4-Bit Differential ECL Bus/TTL Bus Transceiver

The MC10H/100H680 is a dual supply 4–bit Differential ECL bus to TTL bus Transceiver. It is designed to allow the system designer to no longer be limited in bus speed associated With standard TTL busses. Using a Differential ECL Bus will increase the frequency of operation and increase noise immunity.
Both the TTL and the ECL ports are capable of driving a bus. The ECL outputs have the ability to drive 25 Ω, allowing both ends of the bus line to be terminated in the characteristic impedance of 50 Ω. The TTL outputs are specified to source 15 mA and sink 48 mA, allowing the ability to drive highly capacitive loads.

Differential ECL Bus (25 Ω) I/O Ports
• High Drive TTL Bus I/O Ports
• Extra TTL and ECL Power/Ground Pins to Minimize Switching Noise
• Dual Supply
• Direction and Chip Enable Control Pins

Fairchild
Fairchild Semiconductor
Description : Quad Differential ECL/TTL Translating Transceiver With Latch

General Description
The 100397 is a quad latched Transceiver designed to convert TTL logic levels to Differential F100K ECL logic levels and vice versa. This device was designed With the capability of driving a Differential 25Ω ECL load With cutoff capability, and will sink a 64 mA TTL load. The 100397 is ideal for mixed technology applications utilizing either an ECL or TTL backplane.

Features
Differential ECL input/output structure
■ 64 mA FAST TTL outputs
■ 25Ω Differential ECL outputs With cut-off
■ Bi-directional translation
■ 2000V ESD protection
■ Latched outputs
■ 3-STATE outputs
Voltage compensated operating range = −4.2V to −5.7V

Description : 4−Bit Differential ECL Bus to TTL Bus Transceiver

Description
The MC10H/100H680 is a dual supply 4−bit Differential ECL bus to TTL bus Transceiver. It is designed to allow the system designer to no longer be limited in bus speed associated With standard TTL busses. Using a Differential ECL Bus will increase the frequency of operation and increase noise immunity.

Features
Differential ECL Bus (25 ) I/O Ports
• High Drive TTL Bus I/O Ports
• Extra TTL and ECL Power/Ground Pins to Minimize Switching Noise
• Dual Supply
• Direction and Chip Enable Control Pins
• Pb−Free Packages are Available*

Description : Ceramic Transient Voltage suppressors

Ceramic Transient Voltage suppressors
Leaded Transient Voltage/RFI suppressors (SHCVs)

Features
■ RFI noise Suppression and Transient overVoltage protection integrated
   in a single component
■ Reliable protection against automotive Transients such as load dump and
   jump start (for SR1 and SR2 types)
■ High capacitance (up to 4.7 µF)
■ Low clamping Voltage
■ RoHS-compatible
■ Suitable for lead-free soldering
■ PSpice simulation models available

Applications
■ RFI noise Suppression and Transient overVoltage protection on DC lines of
   small motors, windscreen wipers, window lifters, mirrors, central locking,
   memory seat, sunroof

Part Name(s) : BZW03D44
Vishay
Vishay Semiconductors
Description : Silicon Z–Diodes and Transient Voltage Suppressors

Silicon Z–Diodes and Transient Voltage Suppressors



Features

 Glass passivated junction

 Hermetically sealed package

 Clamping sealed package



Applications

Voltage regulators and Transient Suppression circuits


Fairchild
Fairchild Semiconductor
Description : Quad Differential ECL/TTL Translating Transceiver With Latch

General Description

The 100398 is a quad latched Transceiver designed to convert TTL logic levels to Differential F100K ECL logic levels and vice versa. This device was designed With the capability of driving a Differential 25Ω ECL load With cutoff capability, and will sink a 64 mA TTL load. The 100398 is ideal for mixed technology applications utilizing either an ECL or TTL backplane.

The direction of translation is set by the direction control pin (DIR). The DIR pin on the 100398 accepts TTL logic levels. A TTL LOW on DIR sets up the ECL pins as inputs and TTL pins as outputs. A TTL HIGH on DIR sets up the TTL pins as inputs and ECL pins as outputs.



Features

Differential ECL input/output structure

■ 64 mA FAST TTL outputs

■ 25Ω Differential ECL outputs With cut-off

■ Bi-directional translation

■ 2000V ESD protection

■ Latched outputs

■ 3-STATE outputs

Voltage compensated operating range = −4.2V to −5.7V



 


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]