Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : MM54HC155 MM54HC155J MM74HC155 MM74HC155J MM74HC155N National-Semiconductor
National ->Texas Instruments
Description : Dual 2-to-4 line decoder/demultiplexers View

General Description

The MM54HC155/MM74HC155 is a high speed silicon-gate CMOS decoder/demultiplexer. It utilizes advanced silicon gate CMOS technology and features Dual 1-line-to-4-line demultiplexers with independent strobes and common binary-address inputs. When both sections are enabled by the strobes, the common address inputs sequentially select and route associated input data to the appropriate output of each section. The indiviDual strobes permit activating or in hibiting each of the 4-bit sections as desired. Data applied to input C1 is inverted at its outputs and data applied to C2 is non-inverted at its outputs. The inverter following the C1 data input permits use as a 3-to-8-line decoder, or 1-to-8-line demultiplexer, without gating.

All inputs to the decoder are protected from damage due to electrostatic discharge by diodes to VCC and Ground.



Features

■ Applications

   Dual 2-to-4-line decoder

   Dual 1-to-4-line demultiplexer

   3-to-8-line decoder

   1-to-8-line demultiplexer

■ Typical propagation delay: 22 ns

■ Low quiescent current: 80 μA maximum (74HC series)

■ Wide operating range: 2V–6V



 


Part Name(s) : MM54HCT155 MM54HCT155J MM74HCT155 MM74HCT155J MM74HCT155N National-Semiconductor
National ->Texas Instruments
Description : Dual 2-to-4 line decoder/demultiplexers View

General Description

The MM54HCT155/MM74HCT155 is a high speed silicon gate CMOS decoder/demultiplexer. It features Dual 1-to-4 line demultiplexers with independent strobes and common binary address inputs. When both sections are enabled by the strobes, the common address inputs select and route associated input data to the appropriate output of each section. The indiviDual strobes permit activating or inhibiting each of the 4-bit sections as desired. Data applied to input C1 is inverted at its outputs and data applied to C2 is ‘‘noninverted’’ at its outputs. If the strobes (G1 and G2) are connected together and the Data Inputs are connected together, the device can be used as a 3-to-8 line decoder or a 1-to-8 line demultiplexer.

All inputs to the decoder are protected from damage due to electrostatic discharge by diodes to VCC and ground. The device is capable of driving 10 low power Schottky TTL equivalent loads.



Features

■ Applications:

   Dual 2-to-4 line decoder

   Dual 1-to-4 line demultiplexer

   3-to-8 line decoder

   1-to-8 line demultiplexer

■ Typical propagation delay: 22 ns

■ Low quiescent current: 80 mA maximum (74HCT Series)



 


Part Name(s) : LC139AQ LVC139AQ SN74LVC139A-Q1 SN74LVC139AQDRQ1 CLVC139AQPWRG4Q1 SN74LVC139AQPWRQ1 TI
Texas Instruments
Description : Dual 2-line TO 4-line decoder/demultiplexeR View

description/ordering information
This Dual 2-line to 4-line decoder/demultiplexer is designed for 1.65-V to 3.6-V VCC operation.
The device comprises two indiviDual 2-line to 4-line decoders in a single package. The active-low enable (G) input can be used as a data line in demultiplexing applications. This decoder/demultiplexer features fully buffered inputs, each of which represents only one normalized load to its driving circuit.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment.

● Qualified for Automotive Applications
● Operates From 1.65 V to 3.6 V
● Inputs Accept Voltages to 5.5 V
● Max tpd of 6.2 ns
● Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
● Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C
● Latch-Up Performance Exceeds 250 mA Per JESD 17
● ESD Protection Level Per AEC-Q100 Classification
    − 2000-V (H2) Human-Body Model
    − 200-V (M3) Machine Model
    − 1000-V (C5) Charged-Device Model

Part Name(s) : CLVC139AQPWRG4Q1 LVC139AQ SN74LVC139A-Q1 SN74LVC139AQDRQ1 SN74LVC139AQPWRQ1 LC139AQ Texas-Instruments
Texas Instruments
Description : Dual 2-line TO 4-line decoder/demultiplexeR View

description/ordering information
This Dual 2-line to 4-line decoder/demultiplexer is designed for 1.65-V to 3.6-V VCC operation.
The device comprises two indiviDual 2-line to 4-line decoders in a single package. The active-low enable (G) input can be used as a data line in demultiplexing applications. This decoder/demultiplexer features fully buffered inputs, each of which represents only one normalized load to its driving circuit.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment.

● Qualified for Automotive Applications
● Operates From 1.65 V to 3.6 V
● Inputs Accept Voltages to 5.5 V
● Max tpd of 6.2 ns
● Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
● Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C
● Latch-Up Performance Exceeds 250 mA Per JESD 17
● ESD Protection Level Per AEC-Q100 Classification
    − 2000-V (H2) Human-Body Model
    − 200-V (M3) Machine Model
    − 1000-V (C5) Charged-Device Model


Part Name(s) : 74AC11239 74AC11239D 74AC11239N 74ACT11239 74ACT11239D 74ACT11239N AC11239 ACT11239 Philips
Philips Electronics
Description : Dual 2-to-4 line decoder/demultiplexer, active-High View

Dual 2-to-4 line decoder/demultiplexer, active-High

Part Name(s) : SN74LVC139A SN74LVC139AD SN74LVC139ADBR SN74LVC139ADGVR SN74LVC139ADR SN74LVC139ADRG4 SN74LVC139ADT SN74LVC139AGQNR SN74LVC139ANSR SN74LVC139APW Texas-Instruments
Texas Instruments
Description : Dual 2-line TO 4-line decoder/demultiplexeR View

DESCRIPTION/ORDERING INFORMATION
This Dual 2-line to 4-line decoder/demultiplexer is designed for 1.65-V to 3.6-V VCC operation.
The device comprises two indiviDual 2-line to 4-line decoders in a single package. The active-low enable (G) input can be used as a data line in demultiplexing applications. This decoder/demultiplexer features fully buffered inputs, each of which represents only one normalized load to its driving circuit.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment.

FEATURES
• Operates From 1.65 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max tpd of 6.2 ns
• Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
• Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
    – 2000-V Human-Body Model (A114-A)
    – 200-V Machine Model (A115-A)
    – 1000-V Charged-Device Model (C101)

Part Name(s) : 74AC11239 74AC11239D 74AC11239N TI
Texas Instruments
Description : Dual 2–line TO 4–line decoder/demultiplexeR View

description

The 74AC11239 circuit is designed to be used in high-performance memory-decoding or data- routing applications requiring very short propagation delay times. In high-performance memory systems, this decoder can be used to minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay times of this decoder and the enable time of the memory are usually less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible.

The 74AC11239 is comprised of two indiviDual two-line to four-line decoders in a single package. The active-low enable input can be used as a data line in demultiplexing applications. These decoders/demultiplexers feature fully buffered inputs, each of which represents only one normalized load to its driving circuit.

The 74AC11239 is characterized for operation from – 40°C to 85°C.



• Designed Specifically for High-Speed Memory Decoders and Data Transmission Systems

• Incorporates Two Enable Inputs to Simplify Cascading and/or Data Reception

• Flow-Through Architecture to Optimize PCB Layout

• Center-Pin VCC and GND Configurations to Minimize High-Speed Switching Noise

• EPIC™ (Enhanced-Performance Implanted CMOS) 1-μm Process

• 500-mA Typical Latch-Up Immunity at 125°C

• Package Options Include Plastic Small Outline Packages, and Standard Plastic 300-mil DIPs



 


Part Name(s) : 74LS155 74LS156 DM74LS155 DM74LS155M DM74LS155MX DM74LS155N DM74LS156 DM74LS156M DM74LS156MX DM74LS156N Fairchild
Fairchild Semiconductor
Description : Dual 2-line to 4-line Decoders/Demultiplexers View

General Description

These TTL circuits feature Dual 1-line-to-4-line demultiplexers with indiviDual strobes and common binary-address inputs in a single 16-pin package. When both sections are enabled by the strobes, the common address inputs sequentially select and route associated input data to the appropriate output of each section. The indiviDual strobes permit activating or inhibiting each of the 4-bit sections as desired. Data applied to input C1 is inverted at its outputs and data applied at C2 is true through its outputs. The inverter following the C1 data input permits use as a 3-to-8-line decoder, or 1-to-8-line demultiplexer, without external gating. Input clamping diodes are provided on these circuits to minimize transmission-line effects and simplify system design.



Features

■Applications:

   Dual 2-to-4-line decoder

   Dual 1-to-4-line demultiplexer

   3-to-8-line decoder

   1-to-8-line demultiplexer

■IndiviDual strobes simplify cascading for decoding or demultiplexing larger words

■Input clamping diodes simplify system design

■Choice of outputs:

   Totem-pole (DM74LS155)

   Open-collector (DM74LS156)


Part Name(s) : LC139A LVC139A SN74LVC139A SN74LVC139AD SN74LVC139ADBLE SN74LVC139ADBR SN74LVC139ADBRE4 SN74LVC139ADBRG4 SN74LVC139ADE4 SN74LVC139ADG4 TI
Texas Instruments
Description : Dual 2-line TO 4-line decoder/demultiplexeR View

DESCRIPTION/ORDERING INFORMATION
This Dual 2-line to 4-line decoder/demultiplexer is designed for 1.65-V to 3.6-V VCC operation.
The device comprises two indiviDual 2-line to 4-line decoders in a single package. The active-low enable (G) input can be used as a data line in demultiplexing applications. This decoder/demultiplexer features fully buffered inputs, each of which represents only one normalized load to its driving circuit.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment.

FEATURES
• Operates From 1.65 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max tpd of 6.2 ns
• Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
• Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
    – 2000-V Human-Body Model (A114-A)
    – 200-V Machine Model (A115-A)
    – 1000-V Charged-Device Model (C101)

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]