Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Part Name(s) : NJU7048 NJU7048V
JRC
Japan Radio Corporation
Description : High-Speed, Rail-to-Rail I/O, Quad CMOS Operational Amplifier

■ GENERAL DESCRIPTION
The NJU7048 is a Quad rail to rail input/output Operational amplifier featuring high speed, low input bias current and wide temperature range.
High-speed characteristics of slew rate(SR=9V/us. typ.)
and bandwidth (GBW=5MHz.typ.), low input bias current (IB=1pA typ.) and wide temperature range (Ta=−40℃ to 125℃) makes NJU7048 especially suitable for sensors and filters application for industrial.
In addition to The NJU7048 featuring rail to rail input/output makes especially suitable for buffers of input and output for ADC, DAC, ASIC and other wide output swing devices.

■ FEATURES
• Operating Voltage: 2.7V to 5.5V
• High speed SR=9V/µs. typ.(at VDD= 5V) GBW=5MHz typ.
Rail-to-Rail Input/Output
• Low input bias current IB=1pA typ.
• Unity gain stable
• Enhanced RF noise Immunity
• Package SSOP14
• CMOS process
• Wide temperature range Ta=−40℃ to 125℃

■ APPLICATIONS
• Current sensors / Sensor Amplifiers
• Photodiode Amplifiers
• ADC front ends
• ASIC input or output Amplifiers
• Battery-powered instruments

Description : Dual/Quad Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION

Rail-to-Rail output swing combined with dc accuracy are the key features of the OP495 Quad and OP295 Dual CBCMOS Operational Amplifiers. By using a bipolar front end, lower noise and higher accuracy than that of CMOS designs has been achieved. Both input and output ranges include the negative supply, pro

viding the user “zero-in/zero-out” capability. For users of 3.3 volt systems such as lithium batteries, the OP295/OP495 is specified for three volt operation.



FEATURES

Rail-to-Rail Output Swing

Single-Supply Operation: +3 V to +36 V

Low Offset Voltage: 300 mV

Gain Bandwidth Product: 75 kHz

High Open-Loop Gain: 1000 V/mV

Unity-Gain Stable

Low Supply Current/Per Amplifier: 150 mA max



APPLICATIONS

Battery Operated Instrumentation

Servo Amplifiers

Actuator Drives

Sensor Conditioners

Power Supply Control


JRC
Japan Radio Corporation
Description : High-Speed, Rail-to-Rail I/O, Single CMOS Operational Amplifier

■ GENERAL DESCRIPTION

The NJU7046 is a single rail to rail input/output Operational amplifier featuring high speed, low input bias current and wide temperature range. High-speed characteristics of slew rate(SR=9V/us) and bandwidth (GBW=5MHz), low input bias current (IB=1pA typ.) and wide temperature range(Ta=−40℃to 125℃) makes NJU7046 especially suitable for sensors and filters application for industrial, buffers of input and output for ADC, DAC, ASIC and other wide output swing devices.



■FEATURES

• Operating Voltage: 2.7V to 5.5V

• High speed SR=9V/µs. typ.(at VDD= 5V)

                         GBW=5MHz typ.

Rail-to-Rail Input/Output

• Low input bias current IB=1pA typ.

• Unity gain stable

• Enhanced RF noise Immunity

• Package outline SOT−23−5, SC88A

• CMOS process

• Wide temperature range Ta=−40℃to 125℃



■APPLICATIONS

• Current sensors / Sensor Amplifiers

• Photodiode Amplifiers

• ADC front ends

• ASIC input or output Amplifiers

• Battery-powered instruments


Description : Single, Dual, Quad Low-Voltage, Rail-to-Rail Operational Amplifiers

The LMV321, LMV358, and LMV324 are CMOS single, Dual, and Quad low voltage Operational Amplifiers with rail−to−rail output swing. These Amplifiers are a cost−effective solution for applications where low power consumption and space saving packages are critical. Specification tables are provided for operation from power supply voltages at 2.7 V and 5 V. Rail−to−Rail operation provides improved signal−to−noise preformance. Ultra low quiescent current makes this series of Amplifiers ideal for portable, battery operated equipment. The common mode input range includes ground making the device useful for low−side current−shunt measurements. The ultra small packages allow for placement on the PCB in close proximity to the signal source thereby reducing noise pickup.



Features

• Operation from 2.7 V to 5.0 V Single−Sided Power Supply

• LMV321 Single Available in Ultra Small 5 Pin SC70 Package

• No Output Crossover Distortion

• Industrial temperature Range: −40°C to +85°C

• Rail−to−Rail Output

• Low Quiescent Current: LMV358 Dual − 220 A, Max per Channel

• No Output Phase−Reversal from Overdriven Input

• These are Pb−Free Devices



Typical Applications

• Notebook Computers and PDA’s

• Portable Battery−Operated Instruments

• Active Filters


Description : Single, Dual, Quad Low Voltage, Rail-to-Rail Operational Amplifiers

The LMV821, LMV822, and LMV824 are Operational Amplifiers with low input voltage offset and drift vs. temperature. In spite of low quiescent current requirements these devices have 5 MHz bandwidth and 1.4 V/μs slew rate. In addition they provide rail−to−rail output swing into 600 Ω loads. The input common−mode voltage range includes ground, and the maximum input offset voltage is only 3.5 mV. Substantially large capacitive loads can be driven by simply adding a pullup resistor or isolation resistor.



Features

• Low Offset Voltage: 3.5 mV

• Very low Offset Drift: 1.0 μV/°C

• High Bandwidth: 5 MHz

• Rail−to−Rail Output Swing into a 600 Ω load

• Capable of driving highly capacitive loads

• These Devices are Pb−Free and are RoHS Compliant



Typical Applications

• Notebook Computers

• PDAs

• Modem Transmitter/ Receivers



 


Description : Dual/Quad Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION

Rail-to-Rail output swing combined with dc accuracy are the key features of the OP495 Quad and OP295 Dual CBCMOS Operational Amplifiers. By using a bipolar front end, lower noise and higher accuracy than those of CMOS designs have been achieved. Both input and output ranges include the negative supply, providing the user with zero-in/zero-out capability. For users of 3.3 V systems such as lithium batteries, the OP295/OP495 are specified for 3 V operation.



FEATURES

Rail-to-Rail output swing

Single-supply operation: 3 V to 36 V

Low offset voltage: 300 μV

Gain bandwidth product: 75 kHz

High open-loop gain: 1000 V/mV

Unity-gain stable

Low supply current/per amplifier: 150 μA maximum



APPLICATIONS

Battery-operated instrumentation

Servo Amplifiers

Actuator drives

Sensor conditioners

Power supply control


GMT
Global Mixed-mode Technology Inc
Description : Rail-to-Rail I/O, 100mA Output Single-Supply Amplifiers

General Description
The G1201 is Dual Rail-to-Rail input and output single-supply Amplifiers featuring 100mA output drive current. This high output current makes these Amplifiers excellent for driving either resistive or capacitive loads. AC performance is very good with 3.5MHz bandwidth, 6.2V/µs-slew rate and low distortion. All are guaranteed to operate from a +3 volt single supply as well as a +5 volt supply.
The very low input bias currents enable the G1201 to be used for integrators and diode amplification and other applications requiring low input bias current. Allowing low current applications to control high current loads.
Applications include audio amplification for computers, sound ports, sound cards and set-top boxes. The G1201 is very stable and capable of driving heavy capacitive loads.
The ability to swing Rail-to-Rail at the inputs and outputs enables designers to buffer CMOS ADC/DACs, ASICs or other wide output swing devices in single-supply systems.

Features
■ Single-Supply Operation: 2.2 Volts to 6 Volts
■ High Output Current: ±100mA
■ Wide Bandwidth: 3.5 MHz
■ Slew Rate: 6.2 V/µs
■ No Phase Reversal
■ Unity Gain Stable
Rail-to-Rail Input and Output

Applications
■ Multimedia Audio
■ LCD Driver
■ ASIC Input or Output Amplifier
■ Headphone Driver

Description : Ultralow Power, Rail-to-Rail Output Operational Amplifiers

GENERAL DESCRIPTION

The OP181, OP281 and OP481 are single, Dual and Quad ultralow power, single-supply Amplifiers featuring Rail-to-Rail outputs. All operate from supplies as low as 2.0 V and are specified at +3 V and +5 V single supply as well as ±5 V Dual supplies.



FEATURES

Low Supply Current: 4 mA/Amplifier max

Single-Supply Operation: 2.7 V to 12 V

Wide Input Voltage Range

Rail-to-Rail Output Swing

Low Offset Voltage: 1.5 mV

No Phase Reversal



APPLICATIONS

Comparator

Battery Powered Instrumentation

Safety Monitoring

Remote Sensors

Low Voltage Strain Gage Amplifiers



 


ADI
Analog Devices
Description : 20 μA Maximum, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifiers

GENERAL DESCRIPTION

The AD8506/AD8508 are Dual and Quad micropower Amplifiers featuring Rail-to-Rail input and output swings while operating from a 1.8 V to 5 V single or from ±0.9 V to ±2.5 V Dual power supply. Using a novel circuit technology, these low cost Amplifiers offer zero crossover distortion (excellent PSRR and CMRR perform ance) and very low bias current, while operating with a supply current of less than 20 μA per amplifier. This amplifier family offers the lowest noise in its power class.



FEATURES

PSRR: 100 dB minimum

CMRR: 105 dB typical

Very low supply current: 20 μA per amp maximum

1.8 V to 5 V single-supply or ±0.9 V to ±2.5 V Dual-supply operation

Rail-to-Rail input and output

Low noise: 45 nV/√Hz @ 1 kHz

2.5 mV offset voltage maximum

Very low input bias current: 1 pA typical



APPLICATIONS

Pressure and position sensors

Remote security

Bio sensors

IR thermometers

Battery-powered consumer equipment

Hazard detectors


Description : CMOS Quad Rail-to-Rail I/O Op Amp

DESCRIPTION:

Maxwell Technologies’ 6484 provides a common-mode range that extends to both supply rails. This Rail-to-Rail performance combined with excellent accuracy, due to a high CMRR< makes it unique among Rail-to-Rail input Amplifiers. It is ideal for systems, such as data acquisition, that require a large input signal range.

Maximum dynamic signal range is assured in low voltage and single supply systems by the 6484’s Rail-to-Rail output swing. The device’s Rail-to-Rail output swing is guaranteed for loads down to 600Ω. Guaranteed low voltage characteristics and low power dissipation make the 6484 especially well-suited for battery-operated systems.



FEATURES:

• Rad-Pak® technology-hardened against natural space radiation

• Total dose hardness:

   - >100 krad (Si), depending upon orbit and space mission

• Package:

• - 14 pin Rad-Pak® flat package

Rail-to-Rail input common-mode voltage range (guaranteed over temperature

Rail-to-Rail output swing (within 20 mV of supply rail, 100 kΩ load)

• Guaranteed 3V, 5V and 15V performance

• Excellent CMRR and PSRR: 82 dB

• Ultra low input current: 20 pA

• High voltage gain (RL = 500 kΩ): 130 dB

• Specified for 2 kΩ and 600 Ω loads



 


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]