Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Part Name(s) : NJU7048 NJU7048V
JRC
Japan Radio Corporation
Description : High-Speed, Rail-to-Rail I/O, Quad CMOS Operational Amplifier

■ GENERAL DESCRIPTION
The NJU7048 is a Quad rail to rail input/output operational amplifier featuring High speed, low input bias current and wide temperature range.
High-speed characteristics of slew rate(SR=9V/us. typ.)
and bandwidth (GBW=5MHz.typ.), low input bias current (IB=1pA typ.) and wide temperature range (Ta=−40℃ to 125℃) makes NJU7048 especially suitable for sensors and filters application for industrial.
In addition to The NJU7048 featuring rail to rail input/output makes especially suitable for buffers of input and output for ADC, DAC, ASIC and other wide output swing devices.

■ FEATURES
• Operating Voltage: 2.7V to 5.5V
High speed SR=9V/µs. typ.(at VDD= 5V) GBW=5MHz typ.
Rail-to-Rail Input/Output
• Low input bias current IB=1pA typ.
• Unity gain stable
• Enhanced RF noise Immunity
• Package SSOP14
• CMOS process
• Wide temperature range Ta=−40℃ to 125℃

■ APPLICATIONS
• Current sensors / Sensor amplifiers
• Photodiode amplifiers
• ADC front ends
• ASIC input or output amplifiers
• Battery-Powered instruments

JRC
Japan Radio Corporation
Description : High-Speed, Rail-to-Rail I/O, Single CMOS Operational Amplifier

■ GENERAL DESCRIPTION

The NJU7046 is a single rail to rail input/output operational amplifier featuring High speed, low input bias current and wide temperature range. High-speed characteristics of slew rate(SR=9V/us) and bandwidth (GBW=5MHz), low input bias current (IB=1pA typ.) and wide temperature range(Ta=−40℃to 125℃) makes NJU7046 especially suitable for sensors and filters application for industrial, buffers of input and output for ADC, DAC, ASIC and other wide output swing devices.



■FEATURES

• Operating Voltage: 2.7V to 5.5V

High speed SR=9V/µs. typ.(at VDD= 5V)

                         GBW=5MHz typ.

Rail-to-Rail Input/Output

• Low input bias current IB=1pA typ.

• Unity gain stable

• Enhanced RF noise Immunity

• Package outline SOT−23−5, SC88A

• CMOS process

• Wide temperature range Ta=−40℃to 125℃



■APPLICATIONS

• Current sensors / Sensor amplifiers

• Photodiode amplifiers

• ADC front ends

• ASIC input or output amplifiers

• Battery-Powered instruments


Description : Single/Dual/Quad, Low-Power, Single-Supply, Rail-to-Rail I/O Op Amps with Shutdown

General Description
The MAX4330–MAX4334 single/Dual/Quad op amps combine a wide 3MHz bandwidth, low-Power operation, and excellent DC accuracy with Rail-to-Rail inputs and outputs. These devices require only 245µA per amplifier, and operate from either a single +2.3V to +6.5V supply or Dual ±1.15V to ±3.25V supplies. The input common mode voltage range extends 250mV beyond VEE and VCC, and the outputs swing Rail-to-Rail. The MAX4331/MAX4333 feature a shutdown mode in which the output goes High impedance and the supply current decreases to 9µA per amplifier.
Low-Power operation combined with Rail-to-Rail input common-mode range and output swing makes these amplifiers ideal for portable/battery-Powered equipment and other low-voltage, single-supply applications. Although the minimum operating voltage is specified at 2.3V, these devices typically operate down to 2.0V. Low offset voltage and High speed make these amplifiers excellent choices for signal-conditioning stages in precision, low-voltage data-acquisition systems. The MAX4330 is available in the space-saving 5-pin SOT23 package, and the MAX4331/MAX4333 are offered in a µMAX package.

Features
♦ 3MHz Gain-Bandwidth Product
♦ 245µA Quiescent Current per Amplifier
♦ Available in Space-Saving SOT23-5 Package (MAX4330)
♦ +2.3V to +6.5V Single-Supply Operation
Rail-to-Rail Input Common-Mode Voltage Range
Rail-to-Rail Output Voltage Swing
♦ 250µV Offset Voltage
♦ Low-Power, 9µA (per amp) Shutdown Mode (MAX4331/MAX4333)
♦ No Phase Reversal for Overdriven Inputs
♦ Capable of Driving 2kΩ Loads
♦ Unity-Gain Stable

Applications
   Portable/Battery-Powered Equipment
   Data-Acquisition Systems
   Signal Conditioning
   Low-Power, Low-Voltage Applications

Description : Single/Dual/Quad, MicroPower, Ultra-Low-Voltage, Rail-to-Rail I/O Comparators

General Description
The MAX965–MAX970 single/Dual/Quad microPower comparators feature Rail-to-Rail®inputs and outputs, and fully specified single-supply operation down to +1.6V. These devices draw less than 5µA per comparator and have open-drain outputs that can be pulled beyond VCC to 6V (max) above ground. In addition, their Rail-to-Rail input common-mode voltage range makes these comparators suitable for ultra-low-voltage operation.

Features
♦ Ultra-Low Single-Supply Operation down to +1.6V
Rail-to-Rail Common-Mode Input Voltage Range
♦ 3µA Quiescent Supply Current per Comparator
♦ Open-Drain Outputs Swing Beyond VCC
♦ 1.235V ±1.5% Precision Internal Reference(MAX965/967/968/969)
♦ 10µs Propagation Delay (50mV overdrive)
♦ Available in Space-Saving Packages:
  8-Pin µMAX (MAX965–MAX968)
  16-Pin QSOP (MAX969/MAX970)

Applications
   2-Cell Battery-Powered/Portable Systems
   Window Comparators
   Threshold Detectors/Discriminators
   Mobile Communications
   Voltage-Level Translation
   Ground/Supply-Sensing Applications

Description : Single/Dual/Quad, Low-Cost, SOT23, MicroPower Rail-to-Rail I/O Op Amps

General Description
The MAX4040–MAX4044 family of microPower op amps operates from a single +2.4V to +5.5V supply or Dual ±1.2V to ±2.75V supplies and have Rail-to-Rail® input and output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier. The MAX4041/MAX4043 have a low-Power shutdown mode that reduces supply current to less than 1µA and forces the output into a High-impedance state. The combination of low-voltage operation, Rail-to-Rail inputs and outputs, and ultra-low Power consumption makes these devices ideal for any portable/battery-Powered system.

Features
♦ Single-Supply Operation Down to +2.4V
♦ Ultra-Low Power Consumption:
   10µA Supply Current per Amplifier
   1µA Shutdown Mode (MAX4041/MAX4043)
Rail-to-Rail Input Common-Mode Range
♦ Outputs Swing Rail-to-Rail
♦ No Phase Reversal for Overdriven Inputs
♦ 200µV Input Offset Voltage
♦ Unity-Gain Stable for Capacitive Loads up to 200pF
♦ 90kHz Gain-Bandwidth Product
♦ Available in Space-Saving 5-Pin SOT23 and 8-Pin µMAX Packages

Applications
Battery-Powered Systems
Portable/Battery-Powered Electronic Equipment
Digital Scales
Strain Gauges
Sensor Amplifiers
Cellular Phones
Notebook Computers
PDAs

Description : CMOS Quad Rail-to-Rail I/O Op Amp

DESCRIPTION:

Maxwell Technologies’ 6484 provides a common-mode range that extends to both supply rails. This Rail-to-Rail performance combined with excellent accuracy, due to a High CMRR< makes it unique among Rail-to-Rail input amplifiers. It is ideal for systems, such as data acquisition, that require a large input signal range.

Maximum dynamic signal range is assured in low voltage and single supply systems by the 6484’s Rail-to-Rail output swing. The device’s Rail-to-Rail output swing is guaranteed for loads down to 600Ω. Guaranteed low voltage characteristics and low Power dissipation make the 6484 especially well-suited for battery-operated systems.



FEATURES:

• Rad-Pak® technology-hardened against natural space radiation

• Total dose hardness:

   - >100 krad (Si), depending upon orbit and space mission

• Package:

• - 14 pin Rad-Pak® flat package

Rail-to-Rail input common-mode voltage range (guaranteed over temperature

Rail-to-Rail output swing (within 20 mV of supply rail, 100 kΩ load)

• Guaranteed 3V, 5V and 15V performance

• Excellent CMRR and PSRR: 82 dB

• Ultra low input current: 20 pA

High voltage gain (RL = 500 kΩ): 130 dB

• Specified for 2 kΩ and 600 Ω loads



 


Description : Low Power, Low Cost, Rail-to-Rail I/O Amplifers

General Description
The COMLINEAR CLC2011 (Dual) and CLC4011 (Quad) are ultra-low cost, low Power, voltage feedback amplifers. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifer and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input voltage range exceeds the negative and positive rails.
The CLCx011 family of amplifers offer High bipolar performance at a low CMOS prices. They offer superior dynamic performance with 4.9MHz small signal bandwidths and 5.3V/μs slew rates. The combination of low Power, High bandwidth, and Rail-to-Rail performance make the CLCx011 amplifers well suited for battery-Powered communication/computing systems.

FEATURES
■ 136μA supply current
■ 4.9MHz bandwidth
■ Output swings to within 20mV of either rail
■ Input voltage range exceeds the rail by >250mV
■ 5.3V/μs slew rate
■ 21nV/√Hz input voltage noise
■ 16mA output current
■ Fully specifed at 2.7V and 5V supplies

APPLICATIONS
■ Portable/battery-Powered applications
■ PCMCIA, USB
■ Mobile communications, cell phones, pagers
■ ADC buffer
■ Active flters
■ Portable test instruments
■ Notebooks and PDA’s
■ Signal conditioning
■ Medical Equipment
■ Portable medical instrumentation

Description : Low-Cost, High-Slew-Rate, Rail-to-Rail I/O Op Amps in SC70

General Description

The MAX4490/MAX4491/MAX4492 single/Dual/Quad, low-cost CMOS op amps feature Rail-to-Rail®input and

output capability from either a single +2.7V to +5.5V supply or Dual ±1.35V to ±2.75V supplies. These ampli

fiers exhibit a High slew rate of 10V/µs and a gain-band width product of 10MHz. They can drive 2kΩresistive

loads to within 55mV of either supply rail and remain unity-gain stable with capacitive loads up to 300pF.



Features

♦+2.7V to +5.5V Single-Supply Operation

♦10V/µs Slew Rate

Rail-to-Rail Input Common-Mode Voltage Range

Rail-to-Rail Output Voltage Swing

♦10MHz Gain-Bandwidth Product

♦Unity-Gain Stable with Capacitive Loads Up to 300pF

♦50pA Input Bias Current

♦Ultra-Small, 5-Pin SC70 Package (MAX4490)



Applications

Battery-Powered Instruments

Portable Equipment

Audio Signal Conditioning

Low-Power/Low-Voltage Applications

Sensor Amplifiers

RF Power Amplifier Control

High-Side/Low-Side Current Sensors


Description : Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description

The COMLINEAR CLC1011 (single), CLC2011 (Dual), and CLC4011 (Quad) are ultra-low cost, low Power, voltage feedback amplifiers. At 5V, the CLCx011 family uses only 160μA of supply current per amplifier and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input voltage range exceeds the negative and positive rails.

The CLCx011 family of amplifiers offer High bipolar performance at a low CMOS prices. They offer superior dynamic performance with 4.9MHz small signal bandwidths and 5.3V/μs slew rates. The combination of low Power, High bandwidth, and Rail-to-Rail performance make the CLCx011 amplifiers well suited for battery-Powered communication/computing systems



FEATURES

■ 136μA supply current

■ 4.9MHz bandwidth

■ Output swings to within 20mV of either rail

■ Input voltage range exceeds the rail by >250mV

■ 5.3V/μs slew rate

■ 21nV/√Hz input voltage noise

■ 16mA output current

■ Fully specified at 2.7V and 5V supplies

■ CLC1011: Pb-free SOT23-5, SC70-5, SOIC-8

■ CLC2011: Pb-free SOIC-8, MSOP-8

■ CLC4011: Pb-free SOIC-14. TSSOP-14



APPLICATIONS

■ Portable/battery-Powered applications

■ PCMCIA, USB

■ Mobile communications, cell phones, pagers

■ ADC buffer

■ Active filters

■ Portable test instruments

■ Notebooks and PDA’s

■ Signal conditioning

■ Medical Equipment

■ Portable medical instrumentation



 


Description : Rail-to-Rail I/O, High-Slew-Rate OP Amp

General Description
G1214 is a input/output Rail-to-Rail Operational Amplifier. It can be operated from +3V to +5.5V single supply or from ±1.5V to ±2.75 Dual supply. G1214 can drive 66mA into resistor loads to within 10% Power rail. AC performance is very excellent with 6.5MHz bandwidth, 6.5V/µs Slew Rate, 95dB open loop gain, 60 degree phase margin and low distortion.
   
Features
■ +3V to +5.5V Single-Supply Operation
■ Input / Output Rail-to-Rail
■ Low input current
High output driving capacity
■ Low Quiescent Current: 500µA @ 5V
High Slew rate 6.5V/µs
High Gain-Bandwidth Product 6.5MHz
High Open Loop Gain 95dB
High PSRR 70dB
   
Applications
■ Headphone Driver
■ Portable Equipment
■ Battery-Powered Equipment
■ Multimedia Audio
■ ASIC Input or Output Amplifier
■ Sensor Amplifier
■ Low Power/Low Voltage Applications
   

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]