Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : AD9684 AD9684-500EBZ AD9684BBPZ-500 AD9684BBPZRL7-500 ADI
Analog Devices
Description : 14-Bit, 500 MSPS LVDS, Dual Analog-to-Digital Converter View

The AD9684 is a Dual, 14-Bit, 500 MSPS ADC. The device has an on-chip buffer and a sample-and-hold circuit designed for low power, small size, and ease of use. This product is designed for sampling wide bandwidth analog signals. The AD9684 is optimized for wide input bandwidth, a high sampling rate, excellent linearity, and low power in a small package.

Part Name(s) : AD9694 AD9694-500EBZ AD9694BCPZ-500 AD9694BCPZRL7-500 ADI
Analog Devices
Description : 14-Bit, 500 MSPS JESD204B, Quad Analog-to-Digital Converter View


The AD9694 is a quad, 14-Bit, 500 MSPS analog-to-digital Converter (ADC). The device has an on-chip buffer and a sample-and-hold circuit designed for low power, small size, and ease of use. This device is designed for sampling wide bandwidth analog signals of up to 1.4 GHz. The AD9694 is optimized for wide input bandwidth, high sampling rate, excellent linearity, and low power in a small package.


JESD204B (Subclass 1) coded serial digital outputs Lane rates up to 15 Gbps

1.66 W total power at 500 MSPS

   415 mW per analog-to-digital Converter (ADC) channel

SFDR = 82 dBFS at 305 MHz (1.80 V p-p input range)

SNR = 66.8 dBFS at 305 MHz (1.80 V p-p input range)

Noise density = −151.5 dBFS/Hz (1.80 V p-p input range)

0.975 V, 1.8 V, and 2.5 V dc supply operation

No missing codes

Internal ADC voltage reference

Analog input buffer

On-chip dithering to improve small signal linearity

Flexible differential input range    1.44 V p-p to 2.16 V p-p (1.80 V p-p nominal)

1.4 GHz analog input full power bandwidth

Amplitude detect bits for efficient AGC implementation

4 integrated wideband digital processors 48-bit NCO, up to 4 cascaded half-band filters

Differential clock input

Integer clock divide by 1, 2, 4, or 8

On-chip temperature diode

Flexible JESD204B lane configurations



Diversity multiband, multimode digital receivers 3G/4G, W-CDMA, GSM, LTE, LTE-A

General-purpose software radios

Ultrawideband satellite receivers



Signals intelligence (SIGINT)

Part Name(s) : DAC3154 DAC3154IRGCR DAC3154IRGCT DAC3164 DAC3164IRGC25 DAC3164IRGCR DAC3164IRGCT DAC3154I DAC3164I PanJit
Description : Dual 12-/10-Bit 500 MSPS Digital-to-Analog Converters View

The DAC3154/DAC3164 are dual channel 10-/12-bit, pin-compatible family of 500 MSPS Digital-to-Analog Converters (DAC). The DAC3154/DAC3164 use a 10- /12-bit wide LVDS digital bus with an input FIFO. FIFO input and output pointers can be synchronized across multiple devices for precise signal synchronization. The DAC outputs are current sourcing and terminate to GND with a compliance range of –0.5 to 1V. DAC3154/ DAC3164 are pin compatible with the dual-channel, 14-Bit, 500 MSPS Digital-to-Analog Converters DAC3174, and the single channel, 14-/12-10-bit, Digital-to-Analog Converters DAC3171/DAC3161/DAC3151.

• Dual Channel
• Resolution
    – DAC3154: 10-Bit
    – DAC3164: 12-Bit
• Maximum Sample Rate: 500 MSPS
• Pin Compatible Family with DAC3174 and DAC3151/DAC3161/DAC3171
• Input Interface:
    – 12-/10-Bit Wide LVDS Inputs
    – Internal FIFO
• Chip to Chip Synchronization
• Power Dissipation: 460mW
• Spectral Performance at 20 MHz IF
    – SNR: 62 dBFS for DAC3154, 72 dBFS for DAC3164
    – SFDR: 76 dBc for DAC3154, 77 dBc for DAC3164
• Current Sourcing DACs
• Compliance Range: –0.5V to 1V
• Package: 64 Pin QFN (9x9mm)

• Multi-Carrier, Multi-Mode Cellular Infrastructure Base Stations
• Radar
• Signal Intelligence
• Software-Defined Radio
• Test and Measurement Instrumentation

Part Name(s) : TDA8776 TDA8776K TDA8776K/C1 Philips
Philips Electronics
Description : 10-bit, 500 Msps Digital-to-Analog Converter (DAC) View


The TDA8776 is a 10-bit Digital-to-Analog Converter (DAC) for high resolution video and other high frequency

applications. It converts the digital input signal into an analog output voltage at a maximum conversion rate of

500 Msps. No external reference voltage is required and all digital inputs are 10K/100K-ECL compatible.


• 10-bit resolution

• Conversion rate up to 500 MHz

• 10K/100K ECL input levels

• Internal reference voltage generator

• No deglitching circuit required

• Internal input register

• Power dissipation only 925 mW (typical)

• Internal 50Ωoutput load (connected to the analog ground)

• Very few external components required.


High-speed Digital-to-Analog conversion for:

• High resolution video and graphics

• Direct Digital Synthesis (DDS)

• Telecommunication

• High-speed modems.

Part Name(s) : AD9102 AD9102-EBZ AD9102BCPZ AD9102BCPZRL7 ADI
Analog Devices
Description : Low Power, 14-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator View


The AD9102 TxDAC® and waveform generator is a high performance Digital-to-Analog Converter (DAC) integrating on-chip pattern memory for complex waveform generation with a direct digital synthesizer (DDS). The DDS is a 14-bit output, up to 180 MSPS master clock sine wave generator with a 24-bit tuning word, allowing 10.8 Hz/LSB frequency resolution.


On-chip 4096 × 14-bit pattern memory

On-chip DDS

Power dissipation @ 3.3 V, 4 mA output

  96.54 mW @ 180 MSPS

Sleep mode: <5 mW @ 3.3 V

Supply voltage: 1.8 V to 3.3 V

SFDR to Nyquist

  87 dBc @ 10 MHz output

Phase noise @ 1 kHz offset, 180 MSPS, 8 mA: −150 dBc/Hz

Differential current outputs: 8 mA max @ 3.3 V

Small footprint, 32-lead, 5 mm × 5 mm LFCSP with 3.6 mm × 3.6 mm exposed paddle, and Pb-free  package


Medical instrumentation

Portable instrumentation

  Signal generators, arbitrary waveform generators

Automotive radar

Part Name(s) : XRD6418 XRD6418BIQ Exar
Exar Corporation
Description : CMOS 10-Bit, 6 MSPS, High Speed Analog-to-Digital Converter with 8:1 Input Analog Multiplexer View

CMOS 10-Bit, 6 MSPS, High Speed Analog-to-Digital Converter with 8:1 Input Analog Multiplexer

Part Name(s) : CXA1276K Sony
Sony Semiconductor
Description : 8-bit 500 MSPS Flash A/D Converter View

The CXA1276K is an 8-bit ultrahigh-speed flash A/D Converter IC capable of digitizing analog signals at a maximum rate of 500 MSPS. The digital I/O level of this A/D Converter is compatible with the ECL 100K/10KH/10K.

Part Name(s) : AD9254 AD9254-150EBZ AD9254BCPZ-150 AD9254BCPZRL7-150 ADI
Analog Devices
Description : 14-Bit, 150 MSPS, 1.8 V Analog-to-Digital Converter View

The AD9254 is a monolithic, single 1.8 V supply, 14-Bit, 150 MSPS analog-to-digital Converter (ADC), featuring a high performance sample-and-hold amplifier (SHA) and on-chip voltage reference. The product uses a multistage differential pipeline architecture with output error correction logic to provide 14-bit accuracy at 150 MSPS data rates and guarantees no missing codes over the full operating temperature range.

    1.8 V analog supply operation
    1.8 V to 3.3 V output supply
    SNR = 71.8 dBc (72.8 dBFS) to 70 MHz input
    SFDR = 84 dBc to 70 MHz input
    Low power: 430 mW @ 150 MSPS
    Differential input with 650 MHz bandwidth
    On-chip voltage reference and sample-and-hold amplifier
    DNL = ±0.4 LSB
    Flexible analog input: 1 V p-p to 2 V p-p range
    Offset binary, Gray code, or twos complement data format
    Clock duty cycle stabilizer
    Data output clock
    Serial port control
        Built-in selectable digital test pattern generation
        Programmable clock and data alignment

    Ultrasound equipment
    IF sampling in communications receivers CDMA2000, WCDMA, TD-SCDMA, and WiMax
    Battery-powered instruments
    Hand-held scopemeters
    Low cost digital oscilloscopes
    Macro, micro, and pico cell infrastructure

Part Name(s) : AD9709 AD9709ASTZ AD9709ASTZRL AD9709-EBZ1 AD9709-EBZ ADI
Analog Devices
Description : 8-Bit, 125 MSPS, Dual TxDAC+ Digital-to-Analog Converter View

The AD97091 is a dual-port, high speed, 2-channel, 8-bit CMOS DAC. It integrates two high quality 8-bit TxDAC+® cores, a voltage reference, and digital interface circuitry into a small 48-lead LQFP package. The AD9709 offers exceptional ac and dc performance while supporting update rates of up to 125 MSPS.
    8-bit dual transmit Digital-to-Analog Converter (DAC)
    125 MSPS update rate
    Excellent SFDR to Nyquist @ 5 MHz output: 66 dBc
    Excellent gain and offset matching: 0.1%
    Fully independent or single-resistor gain control
    Dual port or interleaved data
    On-chip 1.2 V reference
    Single 5 V or 3.3 V supply operation
    Power dissipation: 380 mW @ 5 V
    Power-down mode: 50 mW @ 5 V
    48-lead LQFP
    Base stations
    Digital synthesis
    Quadrature modulation
    3D ultrasound

12345678910 Next

All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]