Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : XE5690SM-ITR XE5690SM-1 XE5690SM-1ITR Xecom
Xecom
Description : Compact, Low-Cost Global Embedded Modem View

Description
The Xecom XE5690SM provides a complete, global Modem as a compact module. Only Xecom offers Embedded Modems in both through-hole and surface-mount form.
User transferable FCC Part 68 registration comes with every Xecom Modem. This allows the system designer to add a Modem to a process control, remote monitoring, point-of-sale, or remote diagnostic system without Part 68 certification.
The XE5690SM footprint is 20% smaller than the most popular Embedded Modems. The surface mount version frees additional space on the bottom of the application board. The space efficient design allows the development engineer greater flexibility in placement of the Modem within the host system.
Xecom offers two interchangeable models: The XE2422SM offers low speed connectivity at low cost; the XE5692SM permits fast V.92 connections.

Features
• Models -
   XE5690SM (Through-Hole Model)
   XE5690SM-1 (Surface-Mount Model)
• Size:
   XE5690SM: 2.175” x 1.0” x 0.30”
   XE5690SM-1: 2.175” x 1.0” x 0.152”
• Data transfer at rates from 300 bps to 56 Kbps
• Control & configuration via AT commands.
• 3.3 and 5 volt compatible serial interface
• V.42 error control and V.42bis data compression.
• Shared line features prevent Modem operation
   from interfering with voice communications.
• Boot command automatically loads user default
   configuration.
• Complete integrated DAA.
• User transferrable FCC Part 68 registration
• World-wide telephone networks compliance.
• UL60950 Recognition
• Low Power operation, 3.3 Volts, 100 milliwatts;

Part Name(s) : XE1414L Xecom
Xecom
Description : Compact 14.4 KBPS Modem Module for Embedded Applications View

Description
Xecoms XE1414L is a complete, 14.4 Kbps Modem in a single component. The XE1414L can be used in throughout North America and Japan. It includes user transferrable FCC Part 68 Registration.

Features
* User Transferrable FCC Part 68 Registration
* Small Size: 2.75 inches by 1.38 inches by 0.42 inches;
* Modem Protocols support data transfer from 14.4 KBPS down to 300 BPS: V.32bis, V.32, V.22bis, V.22, V.21, Bell 212A and 103;
* Modem Control and Configuration via standard AT Commands
* Fax Protocols: V.17, V.29, V.27ter, and V.21 channel 2
* Error Correction; V.42, MNP2-4 and MNP10
* Data Compression; V.42bis and MNP5 provides a maximum effective data rate of 57,600 bps.
* Non-Volatile Memory for storing telephone numbers and Modem configuration.
* Standard operating temperature range 0C to 70C. Extended operating temperature range of -40C to +85C is availalble.

Part Name(s) : XE3314L Xecom
Xecom
Description : Compact 33.6 KBPS Modem Module for Embedded Applications View

Description
Xecoms XE3314L is a complete, 33.6 Kbps Modem in a single component. The XE3314L can be used in throughout North America and Japan. It includes user transferrable FCC Part 68 Registration.

Features
* User Transferrable FCC Part 68 Registration
* Small Size: 2.75 inches by 1.38 inches by 0.42 inches;
* Modem Protocols for data transfer from 33.6 KBPS down to 300 BPS: V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, V.21, Bell 212A and 103;
* Modem Control and Configuration via standard AT Commands
* Fax Protocols: V.17, V.29, V.27ter, and V.21 channel 2
* Error Correction; V.42, MNP2-4 and MNP10
* Data Compression; V.42bis and MNP5 provides a maximum effective data rate of 133,400 bps.
* Non-Volatile Memory for storing telephone numbers and Modem configuration.
* Standard operating temperature range 0C to 70C. Extended operating temperature range of -40C to +85C is availalble.

Part Name(s) : XE3314L ETC2
Unspecified
Description : Compact 33.6 KBPS Modem Module for Embedded Applications View

[Xecom]

Description
Xecoms XE3314L is a complete, 33.6 Kbps Modem in a single component. The XE3314L can be used in throughout North America and Japan. It includes user transferrable FCC Part 68 Registration.

Features
* User Transferrable FCC Part 68 Registration
* Small Size: 2.75 inches by 1.38 inches by 0.42 inches;
* Modem Protocols for data transfer from 33.6 KBPS down to 300 BPS: V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, V.21, Bell 212A and 103;
* Modem Control and Configuration via standard AT Commands
* Fax Protocols: V.17, V.29, V.27ter, and V.21 channel 2
* Error Correction; V.42, MNP2-4 and MNP10
* Data Compression; V.42bis and MNP5 provides a maximum effective data rate of 133,400 bps.
* Non-Volatile Memory for storing telephone numbers and Modem configuration.
* Standard operating temperature range 0C to 70C. Extended operating temperature range of -40C to +85C is availalble.


Part Name(s) : XE5614L Xecom
Xecom
Description : Compact 56 KBPS Modem Module for Embedded Applications View

Description
Xecoms XE5614L is a complete, 56 Kbps Modem in a single component. The XE5614L can be used in throughout North America and Japan. It includes user transferrable FCC Part 68 Registration.

Features
* Meets telecom requirements for North America, and Japan: Includes User Transferrable FCC Part 68 Registration
* Small Size: 2.75 inches by 1.38 inches by 0.42 inches;
* Modem Protocols for data transmission from 56 KBPS down to 300 BPS: XEV.90 (56 Kbps), V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, V.21, Bell 212A and 103;
* Modem Control and Configuration via standard AT Commands
* Fax Protocols: V.17, V.29, V.27ter, and V.21 channel 2
* Error Correction; V.42, MNP2-4 and MNP10
* Data Compression; V.42bis and MNP5 provides a maximum effective data rate of 133,400 bps.
* Non-Volatile Memory including for storing telephone numbers and Modem configuration.
* Standard operating temperature range 0C to 70C. Extended operating temperature range of -40C to +85C is availalble.

Part Name(s) : CH1794 CH1794ET CH1799 CH1799ET CH1799ETBR CH1799LL CH1799TBR CH2056 CH2056ET CH2056ETBR Cermetek
Cermetek Microelectronics
Description : HIGH SPEED Modem and FAX Family View

INTRODUCTION

The CH2056, CH1799 and CH1794 (HS Modem Family) are industrial grade high-speed Modem modules. Each HS Modem product supports a range of Modem standards and speeds from 300bps to 14,400bps, 28,800bps, 33,600bps or 57,600bps. By using built in compression algorithms the operation speed can be expanded to the maximum DTE rate of 57.6kbps for the CH1794, 115.2kbps for the CH1799 and 230.4kbps for the CH2056. A choice of error correcting schemes is available including MNP 10 for cellular telephone applications. The HS Modem Family supports Send and Receive FAX. The CH1799LL operates exclusively on non-voltage bearing leased line.

The HS Modem Family is pin compatible with Cermetek’s low cost CH1786 V.22bis, 2400bps Modem Family. Each module in the HS Modem Family is a self-contained Modem and is FCC Part 68 approved and Canadian DOT approvable. Additionally, the CH1799TBR/ETBR and the CH2056TBR/ETBR products meet the European TBR21 requirements.

These ultra small modules are designed for PCB through-hole mounting and are 1.35” x 1.38” x 0.61” (nominal, 0.55” upon request) in size. The HS Modem Family requires only two external interfaces: a CCITT V.24 serial interface for direct access to a UART, and a Tip and Ring RJ-11C Jack for the PSTN line connection. The HS Modem can be controlled with industry standard AT commands and is compatible with available industry communication software.



FEATURES

• Supports V.90, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22A/B, V.23, V.21, Bell 212A and 103.

• CH2056 supports V.80 Synchronous operation.

• Error correcting: V.42 LAMP, MNP 2-4 and MNP10.

• Data Compression: V.42bis and MNP 5

• MNP10 Data through put enhancement for cellular operation.

• DTE serial interface with speeds up to 230.4kbps (CH2056), 115.2 (CH1799) or 57.6kbps (CH1794).

• Automatic baud rate adaptability utilizing speed sensing, flow control and data buffers.

• Send & Receive FAX class 1, Group 3 supported.

• Serial V.24, 5 volt interface.

• NVRAM directory and stored profiles.

• AT Command structure, with extensions.

• Built-in DAA with 1500 VAC RMS isolation 2122V peak surge protection.

• UL 1950 and CSA C22.2 950 Recognized (E104957).

• Leased Line version available CH1799LL

• FCC part 68 Approved/DOT CSA CS-03 Part I Approvable.

• +5 Volt operation with zero power option

• Small size: 1.35” x 1.38” x 0.61” (nominal, 0.55” upon request).

• Pin compatible with low speed/low cost CH1786

• TBR21 compliant versions available: CH1799TBR/ETBR and CH2056TBR/ETBR.



 


Part Name(s) : CH1782A Cermetek
Cermetek Microelectronics
Description : Family of Ultra Small Modem Modules V.22bis-2400bps View

INTRODUCTION
The CH1782A Ultra Small Modem Module is a pin compatible and functional replacement for the CH1782. The CH1782A replaces the CH1782 due to the obsolescence of the Modem chip set in the CH1782 by the manufacturer.

FEATURES
• Supports Standards CCITT V.22bis, V.22, Bell 212, and Bell 103
• FCC Part 68 approved and DOC approvable
• AT Command structure – with extensions
• 1000 VAC isolation barrier
• Single 5 volt operation
• Low power operation with automatic reduced power standby mode
• Automatic adaptive and fixed compromise equalization
• Size: 1.0”X1.25”X0.53”

Part Name(s) : FC100 FC200 FM209 FM209-V FM209-VS FM209-VSR FM214 FM214-V FM214-VS FM214-VSR Conexant
Conexant Systems
Description : 9600/14400 bps MONOFAX Modem Family View

9600/14400 bps MONOFAX® Modem Family

The Conexant™ FM209 and FM214 MONOFAX™ Modem Family offers synchronous 9600 or 14400 bits per second (bps) half-duplex Modems with error detection, voice and audio codecs, full-duplex speakerphone, automatic speech recognition, DTMF reception, V.23 full-duplex, Type I Caller ID and Type II Caller ID CAS detection. It has low power consumption and is housed in a single 128-pin Thin Quad Flat Pack (TQFP) device package. The Modems small size and low power consumption allow the design of compact system enclosures for use in both office and home environments. Table 1 lists the FM209/FM214 models and features.



 


Part Name(s) : CH2165 Cermetek
Cermetek Microelectronics
Description : HIGH SPEED INTERNET Modem Family View

INTRODUCTION
Direct machine-to-machine interaction represents the next logical extension of the internet. Cermetek internet Modem (iModem) products are designed to exploit the internet to facilitate the utilization of machine-to-machine interactions. Using email, information can easily be transferred between systems and can be transmitted/retrieved at will. Internet email provides low cost, near real time multi-path communication.

FEATURES
• Replaces conventional Modems using the world wide web for communication.
• Transparent internet operations of Point-to-Point Protocol (PPP), Password Authentication Protocol (PAP) and Challenge Authentication Protocol (CHAP) to connect to the Internet.
• Built-in TCP/IP and SMTP to send emails, TCP/IP and POP3 to retrieve and/or delete emails.
• On Demand and I/O pin event driven email transmission and retrieval.
• Send/Retrieve streaming email of unlimited length; or pre-stored email up to 5M bytes in RAM (CH2165).
• Retrieve multiple messages (CH2165) or select individual message (CH2124/60).
• Once online CH2165 can stay online and send, retrieve and/or delete email.
• Programmable using serial interface (CH2124/60/65).
• Remote programming using PSTN (CH2124/60).
• Resident Modem supports: V.90, V.34bis, V.34, V.22bis, V.22A/B V.23, V.21, Bell 212A and 103, (depending on model) and can be used in conventional Modem mode.
• Error correcting: V.42 LAPM, MNP 2-4 and MNP10.
• Automatic baud rate adaptability utilizing speed sensing, flow control and data buffers.
• Serial interface, V.24 (EIA 232-E), 5 volts.
• NVRAM for stored Modem (S-Registers) profiles.
• Cermetek @T® AT-like Commands.
• Built-in DAA with 1500 VAC RMS isolation 2122V peak surge protection.
• UL 1950 and CSA C22.2 950 (Third Edition) Listed, reference UL File E104957.
• FCC Part 68 Approved/DOT CSA CS-03 Part I approvable.
• Pin-for-Pin compatible Family.
• +5 Volt operation.
• Small size: 1.35” x 1.97” x 0.55” (nominal).
• Low Cost 2400bps version (CH2124).
• Use with any Non-proprietary commercial or private ISP.
• Cermetek’s iModem Network ISP has 1000s of local access numbers world wide.
• Failsafe back up 1-800 access number, auxiliary and alternative telephone numbers available.
• Low cost iModem Network ISP providing email to Voice, Fax, and email re-routing services.
• 90 day free trial subscription to iModem Network ISP provided with each iModem.

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]