Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : DS26LV31QML DS26LV31W-QML 5962-9858401QFA National-Semiconductor
National ->Texas Instruments
Description : 3V Enhanced CMOS Quad Differential Line Driver View

General Description
The DS26lV31 is a high-speed Quad Differential CMOS Driver that is comparable to the TIA/EIA-422-B and ITU-T V.11 standards. The CMOS DS26LV31 features low static ICC of 125 µA Max which makes it ideal for battery powered and power conscious applications. Differential outputs have the same VOD guarantee (≥2V) as the 5V version. The EN and EN inputs allow active Low or active High control of the TRI-STATE outputs. The enables are common to all four Drivers. Protection diodes protect all the Driver inputs against electrostatic discharge. The Driver and enable inputs (DI, EN, EN) are compatible with low voltage LVTTL and LVC MOS devices.

Features
■ Comparable to both TIA/EIA-422 and ITU-T V.11 standards.
■ Interoperable with existing 5V RS-422 networks
■ Low quiescent current
■ Pin compatiable with DS26C31

Part Name(s) : DS26LV31T DS26LV31TM DS26LV31TMX DS26LV31W National-Semiconductor
National ->Texas Instruments
Description : 3V Enhanced CMOS Quad Differential Line Driver View

General Description
The DS26LV31T is a high-speed Quad Differential CMOS Driver that meets the requirements of both TIA/EIA-422-B and ITU-T V.11. The CMOS DS26LV31T features low static ICC of 100 µA MAX which makes it ideal for battery powered and power conscious applications.
Differential outputs have the same VOD guarantee (≥2V) as the 5V version.

Features
■ Industrial product meets TIA/EIA-422-B (RS-422) and ITU-T V.11 recommendation
■ Military product conforms to TIA/EIA-422-B (RS-422)
■ Interoperable with existing 5V RS-422 networks
■ Industrial and Military temperature range
■ Guaranteed VOD of 2V min over operating conditions
■ Balanced output crossover for low EMI (typical within 40 mV of 50% voltage level)
■ Low power design (330 µW 3.3V static)
■ ESD ≥ 7 kV on cable I/O pins (HBM)
■ Guaranteed AC parameter:
    — Maximum Driver skew: 2 ns
    — Maximum transition time: 10 ns
■ Pin compatible with DS26C31
■ Available in SOIC and Cerpack packaging
■ Standard Microcircuit Drawing (SMD) 5962-98584

Part Name(s) : DS34LV87T DS34LV87TMX DS34LV87TM National-Semiconductor
National ->Texas Instruments
Description : Enhanced CMOS Quad Differential Line Driver View

General Description
The DS34LV87T is a high speed Quad Differential CMOS Driver that meets the requirements of both TIA/EIA-422-B and ITU-T V.11. The CMOS DS34LV87T features low static ICC of 100 µA max which makes it ideal for battery powered and power conscious applications. The TRI-STATE® enable, EN, allows the device to be disabled when the device is not in use to minimize power. The dual enable scheme allows for flexibility in turning devices on or off.

Features
■ Meets TIA/EIA-422-B (RS-422) and ITU-T V.11 recommendation
■ Interoperable with existing 5V RS-422 networks
■ Guaranteed VOD of 2V min over operating conditions
■ Balanced output crossover for low EMI (typical within 40 mV of 50% voltage level)
■ Low power design (330 µW @ 3.3V static)
■ ESD ≥ 7 kV on cable I/O pins (HBM)
■ Industrial temperature range
■ Guaranteed AC parameter:
    — Maximum Driver skew: 2 ns
    — Maximum transition time: 10 ns
■ Pin compatible with DS26C31
■ Available in SOIC packaging

Part Name(s) : DS34LV87T DS34LV87TM DS34LV87TM/NOPB DS34LV87TMX/NOPB Texas-Instruments
Texas Instruments
Description : Enhanced CMOS Quad Differential Line Driver View

DESCRIPTION
The DS34LV87T is a high speed Quad Differential CMOS Driver that meets the requirements of both TIA/EIA-422-B and ITU-T V.11. The CMOS DS34LV87T features low static ICC of 100 μA max which makes it ideal for battery powered and power conscious applications. The TRI-STATE enable, EN, allows the device to be disabled when the device is not in use to minimize power. The dual enable scheme allows for flexibility in turning devices on or off.

FEATURES
• Meets TIA/EIA-422-B (RS-422) and ITU-T V.11 Recommendation
• Interoperable With Existing 5V RS-422 Networks
• Ensured VOD of 2V Min Over Operating Conditions
• Balanced Output Crossover for Low EMI(Typical Within 40 mV of 50% Voltage Level)
• Low Power Design (330 μW @ 3.3V Static)
• ESD ≥ 7 kV on Cable I/O Pins (HBM)
• Industrial Temperature Range
• Ensured AC Parameter:
    – Maximum Driver Skew: 2 ns
    – Maximum Transition Time: 10 ns
• Pin Compatible With DS26C31
• Available in SOIC Packaging


Part Name(s) : DS26LV31T DS26LV31TM DS26LV31TM/NOPB DS26LV31TMX/NOPB Texas-Instruments
Texas Instruments
Description : 3V Enhanced CMOS Quad Differential Line Driver View

DESCRIPTION
The DS26LV31T is a high-speed Quad Differential CMOS Driver that meets the requirements of both TIA/EIA-422-B and ITU-T V.11. The CMOS DS26LV31T features low static ICC of 100 μA MAX which makes it ideal for battery powered and power conscious applications.

FEATURES
• Industrial Product Meets TIA/EIA-422-B (RS- 422) and ITU-T V.11 Recommendation
• Military Product Conforms to TIA/EIA-422-B (RS-422)
• Interoperable with Existing 5V RS-422 Networks
• Industrial and Military temperature Range
• Guaranteed VOD of 2V min Over Operating Conditions
• Balanced Output Crossover for Low EMI (Typical Within 40 mV of 50% Voltage Level)
• Low Power Design (330 μW @ 3.3V static)
• ESD ≥ 7 kV on Cable I/O Pins (HBM)
• Guaranteed AC Parameter:
    – Maximum Driver Skew: 2 ns
    – Maximum Transition Time: 10 ns
• Pin Compatible with DS26C31
• Available in SOIC and CLGA Packaging
• Standard Microcircuit Drawing (SMD) 5962-98584

Part Name(s) : ST34C87 ST34C87CP16 ST34C87CF16 ST34C87IP16 ST34C87IF16 Exar
Exar Corporation
Description : Quad RS-422 CMOS Differential Line Driver View

GENERAL DESCRIPTION
The ST34C87 is a CMOS Quad Differential Line Driver designed to meet the standard RS-422 requirements and digital data transmission over balanced Lines. To improve noise margin and output stability for slow changing input signals, special hysteresis is built in the ST34C87 circuit. The ST34C87 is a high speed CMOS Line Driver designed to operate with MFM / RLL controllers and hard disk drives as well as RS-422 digital data transmission applications. ST34C87 is suitable for low power 5V operation with high input voltage protection devices.

FEATURES
 • Pin-to-Pin Compatible with National DS34C87
 • Low Power CMOS Design
 • Three-State Outputs with Enable Pin
 • Meets the EIA RS-422 Requirements
 • Low Propagation Delays
 • High Speed

Part Name(s) : MM88C29 MM88C29N MM88C30 MM88C30M MM88C30MX MM88C30N Fairchild
Fairchild Semiconductor
Description : Quad Single-Ended Line Driver • Dual Differential Line Driver View

General Description

The MM88C30 is a dual Differential Line Driver that also performs the dual four-input NAND or dual four-input AND function. The absence of a clamp diode to VCC in the input protection circuitry of the MM88C30 allows a CMOS user to interface systems operating at different voltage levels. Thus, a CMOS digital signal source can operate at a VCC voltage greater than the VCC voltage of the MM88C30 Line Driver. The Differential output of the MM88C30 eliminates ground-loop errors.

The MM88C29 is a non-inverting single-wire transmission Line Driver. Since the output ON resistance is a low 20Ω typ., the device can be used to drive lamps, relays, solenoids, and clock Lines, besides driving data Lines.



Features

■ Wide supply voltage range: 3V to 15V

■ High noise immunity: 0.45 VCC (typ.)

■ Low output ON resistance: 20Ω (typ.)



 


Part Name(s) : DS90C031B DS90C031BTM DS90C031BTWM DS90C031BTMX National-Semiconductor
National ->Texas Instruments
Description : LVDS Quad CMOS Differential Line Driver View

General Description
The DS90C031B is a Quad CMOS Differential Line Driver designed for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 155.5 Mbps (77.7 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology.
The DS90C031B accepts TTL/CMOS input levels and translates them to low voltage (350 mV) Differential output signals. In addition the Driver supports a TRI-STATE® function that may be used to disable the output stage, disabling the load current, and thus dropping the device to an ultra low idle power state of 11 mW typical.

Features
■ >155.5 Mbps (77.7 MHz) switching rates
■ High impedance LVDS outputs with power-off
■ ±350 mV Differential signaling
■ Ultra low power dissipation
■ 400 ps maximum Differential skew (5V, 25˚C)
■ 3.5 ns maximum propagation delay
■ Industrial operating temperature range
■ Pin compatible with DS26C31, MB571 (PECL) and 41LG (PECL)
■ Conforms to ANSI/TIA/EIA-644 LVDS standard
■ Offered in narrow and wide body SOIC package
■ Fail-safe logic for floating inputs

Part Name(s) : STLVDS47BD STLVDS47BDR STLVDS47BTR STLVDS47 ST-Microelectronics
STMicroelectronics
Description : 3V LVDS Quad CMOS Differential Line Driver View

DESCRIPTION

The STLVDS47 is a Quad CMOS flow-through Differential Line Driver designed for applications requiring ultra low power dissipation and high data rate. The device is designed to support data rates in excess of 400Mbps (200 MHz) utilizing Low Voltage Differential Signaling (LVDS) techology.

The STLVDS47 accepts low voltage TTL/CMOS input levels and translates them to low voltage (350 mV) Differential output signals. In addition, the Driver support a TRI-STATE function that may be used to disable the output stage, disabling the load current, and thus dropping the device to an ultra low idle power state of 1.3mW typical. The STLVDS47 has a flow-through pinout for easy PCB layout.

The EN and EN* inputs are ANDed together and control the TRI-STATE output.

The STLVDS47 and companion Line receiver (STLVDS48) provide a new alternative to high power pseudo-ECL devices for high-speed point-to-point interface applications.



■ >400 MBPS (200MHZ) SWITCHING RATES

■ FLOW-THROUGH PINOUT SIMPLIFIES PCB LAYOUT

■ 300ps (MAX.) Differential SKEW

■ 1.8 ns (TYP.) PROPAGATION DELAY

■ 3.3V POWER SUPPLY DESIGN

■ ±350 mV Differential SIGNALING

■ LOW POWER DISSIPATION (3.5mW AT 3.3V STATIC IN TRISTATE)

■ INTEROPERABLE WITH EXISTING 5V LVDS RECEIVERS

■ HIGH IMPEDANCE ON LVDS OUTPUT ON POWER DOWN

■ CONFORMS TO TIA/EIA-644 LVDS STANDARD

■ INDUSTRIAL OPERATING TEMPERATURE RANGE (-40 °C TO +85 °C)

■ AVAILABLE IN SURFACE MOUNT (SOIC) AND LOW PROFILE TSSOP PACKAGE



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]