Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : F4558 Unspecified
Unspecified
Description : Dual operational Amplifier View

[CHMC]

Overview:
The F4558 internally includes two independent, high gain, internal frequencies Compensated dual op amp, suitable for a wide range of power supply voltage range Used, also applies to dual power mode, under recommended operating conditions, power supply The current is independent of the supply voltage. Its use range includes sense amplifier, DC Gain modules and all other available single-supply power supplies using op amps occasion.
F4558 in DIP8 package.


Features:
● Internal frequency compensation
● DC voltage gain high (about 100dB)
● unit gain frequency bandwidth (about 1MHz)
● low input bias current
● low input offset voltage and offset current
● Common mode input voltage range, including ground
● differential mode input voltage range, equal to the supply voltage range
● Output voltage swing large (0 to Vcc-1.5V)

Part Name(s) : LH2101A LH2201A LH2301A LH2101AD LH2201AD LH2301AD National-Semiconductor
National ->Texas Instruments
Description : Dual High performance operational amplifiers View

Dual High performance operational amplifiers

Part Name(s) : RC4156 RC4156M RC4156MT RC4156MT_32 RC4156M_32 RC4156N RC4156N_32 RC4157 RC4157M RC4157N Fairchild
Fairchild Semiconductor
Description : High performance Quad operational amplifiers View

Description

The RC4156 and RC4157 are monolithic integrated circuits, consisting of four independent high performance operational amplifiers constructed with an advanced epitaxial process. These amplifiers feature improved AC performance which far exceeds that of the 741 type amplifiers. also featured are excellent input characteristics and low noise, making this device the optimum choice for audio, active filter and instrumentation applications. The RC4157 is a decompensated

version of the RC4156 and is AC stable in gain configurations of -5 or greater.



Features

• Unity gain bandwidth for RC4156 – 3.5 MHz

• Unity gain bandwidth for RC4157 – 19 MHz

• High slew rate for RC4156 – 1.6 V/µS

• High slew rate for RC4157 – 8.0V/µS

• Low noise voltage – 1.4 µVRMS

• Indefinite short circuit protection

• No crossover distortion


Part Name(s) : 27L4AC 27L4AI 27L4C 27L4I ST-Microelectronics
STMicroelectronics
Description : Very low power precision CMOS quad operational amplifiers View

Description
The TS27L4 series are low-cost, low-power quad operational amplifiers designed to operate with single or dual supplies. These operational amplifiers use the ST silicon gate CMOS process allowing an excellent consumption-speed ratio. These series are ideally suited for low consumption applications.
   
Features
■ Very low power consumption: 10 µA/op
■ Output voltage can swing to ground
excellent phase margin on capacitive loads
■ Unity gain stable
■ Two input offset voltage selections
   


Part Name(s) : MC34080 MC34080BD MC34080BP MC34081 MC34081BD MC34081BP MC34082 MC34082P MC34083 MC34083BP Motorola
Motorola => Freescale
Description : HIGH performance JFET INPUT operational amplifiers View

High Slew Rate, Wide Bandwidth, JFET Input operational amplifiers

These devices are a new generation of high speed JFET input monolithic operational amplifiers. Innovative design concepts along with JFET technology provide wide gain bandwidth product and high slew rate. Well–matched JFET input devices and advanced trim techniques ensure low input offset errors and bias currents. The all NPN output stage features large output voltage swing, no deadband crossover distortion, high capacitive drive capability, excellent phase and gain margins, low open loop output impedance, and symmetrical source/sink AC frequency response.
This series of devices is available in fully compensated or decompensated (AVCL≤2) and is specified over a commercial temperature range. They are pin compatible with existing Industry standard operational amplifiers, and allow the designer to easily upgrade the performance of existing designs.

• Wide Gain Bandwidth: 8.0 MHz for Fully Compensated Devices
   Wide Gain Bandwidth: 16 MHz for Decompensated Devices
• High Slew Rate: 25 V/µs for Fully Compensated Devices
   High Slew Rate: 50 V/µs for Decompensated Devices
• High Input Impedance: 1012Ω
• Input offset Voltage: 0.5 mV Maximum (Single Amplifier)
• Large Output Voltage Swing: –14.7 V to +14 V for
   Large Output Voltage Swing: VCC/VEE = ±15 V
• Low Open Loop Output Impedance: 30 Ω @ 1.0 MHz
• Low THD Distortion: 0.01%
excellent Phase/Gain Margins: 55°/7.6 dB for Fully Compensated Devices

Part Name(s) : 6458DS LA6458D SANYO
SANYO -> Panasonic
Description : High-performance Dual operational amplifiers View

Overview

The LA6458 consists of two independent, internally phase compensated operational amplifiers. Application areas include active filters, audio preamplifiers, and various electronic circuits.



 


Part Name(s) : MC33282 MC33282D MC33282DR2 MC33282P MC33284 MC33284D MC33284DR2 MC33284P ON-Semiconductor
ON Semiconductor
Description : HIGH performance operational amplifiers View

Low Input offset, High Slew Rate, Wide Bandwidth, JFET Input operational Amplifies



The MC33282/284 series of high performance operational amplifiers are quality fabricated with innovative bipolar and JFET design concepts. This dual and quad amplifier series incorporates JFET inputs along with a patented Zip–R–Trim® element for input offset voltage reduction.



The MC33282/284 series are specified over –40°to +85°C and are available in plastic DIP and SOIC surface mount packages.

•Low Input offset Voltage: Trimmed to 200 µV

•Low Input Bias Current: 30 pA

•Low Input offset Current: 6.0 pA

•High Input Resistance: 1012 Ω

•Low Noise: 18 nV  Hz √ @ 1.0 kHz

•High Gain Bandwidth Products: 35 MHz @ 100 kHz

•High Slew Rate: 15 V/µs

•Power Bandwidth: 175 kHz

•Unity Gain Stable: w/Capacitance Loads to 300 pF

•Large Output Voltage Swing: +14.1 V/–14.6 V

•Low Total Harmonic Distortion: 0.003%

•Power Supply Drain Current: 2.15 mA per Amplifier

•Dual Supply Operation:±2.5 V to ±18 V (Max)



 


Part Name(s) : CA3420 CA3420A CA3420AT CA3420E Intersil
Intersil
Description : 0.5MHz, Low Supply Voltage, Low Input Current BiMOS operational amplifiers View

0.5MHz, Low Supply Voltage, Low Input Current BiMOS operational amplifiers



The CA3420A and CA3420 are integrated circuit operational amplifiers that combine PMOS transistors and bipolar transistors on a single monolithic chip. The CA3420A and CA3420 BiMOS operational amplifiers feature gate protected PMOS transistors in the input circuit to provide very high input impedance, very low input currents (less than 1pA).



Features

• 2V Supply at 300µA Supply Current

• 1pA Input Current (Typ) (Essentially Constant to 85oC)

• Rail-to-Rail Output Swing (Drive±2mA into 1kΩLoad)

• Pin Compatible with 741 operational amplifiers



Applications

• pH Probe amplifiers

• Picoammeters

• Electrometer (High Z) Instruments

• Portable Equipment

• Inaccessible Field Equipment

• Battery-Dependent Equipment (Medical and Military)


Part Name(s) : TS274 TS274ACD TS274AC TS274C TS274ACDT TS274ACN TS274ACPT TS274AID TS274AI TS274I ST-Microelectronics
STMicroelectronics
Description : High performance CMOS quad operational amplifier View

Description

The TS274 devices are low cost, quad operational amplifiers designed to operate with single or dual supplies. These operational amplifiers use the ST silicon gate CMOS process giving an excellent consumption-speed ratio. These series are ideally suited for low consumption applications.



Features

■ Output voltage can swing to ground

excellent phase margin on capacitive loads

■ Gain bandwidth product: 3.5 MHz

■ Unity gain stable

■ Two input offset voltage selections



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]