Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : 128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight

[PACIFIC DISPLAY DEVICES]

Product Overview
• 128 x 64 dot matrix LCD
• STN (Super Twisted Nematic) or FSTN (Film compensated Super Twisted Nematic) Technology
• T-6963 (or equivalent) Graphics Controller IC w/ 8K SRAM.
• Multiplex drive : 1/64 duty, 1/9 bias
• LCD Module Service Life: 100,000 hours minimum

Description : 3 Watt DIP24 & SMD Single & Dual Output

Description
Besides the standard isolation of 2kVDC, this series offers options of 4kVDC (= "/H4") or 6kVDC (="/H6") making it suitable for medical applications and other sophisticated industrial applications. Packaging can be either DIP-24 plastic or 5-side-shielded DIP24 metal case (=option "/M") as well as SMD pinning (= option "/SMD"). For all the above variants, 2 industry-standard pinouts (= option "/A" or "/C") are available, and B pinning is available with 1.6kVDC isolation. Remote on/off control is possible with the /CTRL option (A pinning only). The converters can deliver 140% rated power for short periods of time to cope with applications with large capacitive loads or high start up currents.

Features
Regulated Converters
● 2kV, 4kVDC & 6kVDC Isolation
● Industry Standard 3W DIP24 Package
● Feedback Regulated Output
● Continuous Short circuit Protection
● Wide Input 2:1 & 4:1
● Medical Approvals (4kV/6kV Versions)
● EN and UL Certificates
● 3 Pinout Options, 3 Case Styles
● Control Pin Option
● Efficiency to 86%

Description : 16 Character by 2 Line Alphanumeric LCD Assembly With Embedded Controller

[PACIFIC DISPLAY DEVICES]



GENERAL INFORMATION

Product Overview

• 16 Character x 2 line Alphanumeric Dot Matrix LCD Module

• LCD Controller: Embedded S6A0069 or equivalent alpha-numeric controller

• Multiplexing driving: 1/16 duty, 1/5 bias

• Operating Mode: Super Twisted Nematic (STN) technology

• LCD Module Service Life: 100,000 hours minimum



 


Description : 3 Watt DIP24 / SMD Single & Dual Output

Features
Regulated Converters
● Regulated Output
● Continuous Short circuit Protection Auto-Restarting
● Wide Input 2:1 & 4:1
● UL94V-0 Package Material
● Cost Effective
● 100% Burned In
● Efficiency to 86%

Part Name(s) : TEA6843 TEA6843HL
Philips
Philips Electronics
Description : New In Car Entertainment (NICE) extended car radio

GENERAL DESCRIPTION
The TEA6843HL is a single IC with car radio tuner for AM, FM and Weather Band (WB) intended for microcontroller tuning with the I2C-bus. It provides the following functions:

• AM double conversion receiver for LW, MW and SW (31 m, 41 m and 49 m bands) with IF1 = 10.7 MHz and IF2 = 450 kHz
• FM single conversion receiver with integrated image rejection for IF = 10.7 MHz capable of selecting US FM, US weather, Europe FM, East Europe FM and Japan FM bands
• The tuning system includes FM mixer, AM mixer 1, AM mixer 2, crystal oscillator, VCO and PLL synthesizer on one chip.

FEATURES
• FM mixer for conversion of FM RF from 65 to 108 MHz to IF of 10.7 MHz; the mixer provides inherent image rejection
• FM RF mixer can be set to receive weather band radio up to 162.55 MHz
• Buffer output for weather band flag
• AM mixer 1 for conversion of AM RF to AM IF1 of 10.7 MHz
• LC tuner oscillator providing mixer frequencies for FM mixer and AM mixer 1
• AM mixer 2 for conversion of AM IF1 to AM IF2 of 450 kHz
• Crystal oscillator providing mixer frequencies for AM mixer 2 and reference for synthesizer PLL, IF count, timing for inaudible radio Data System (RDS) update and reference frequency for car audio signal processor ICs
• Fast synthesizer PLL tuning system with local control for inaudible RDS updating
• Timing function for RDS update algorithm and control signal output for car audio signal processor ICs (TEA688x, SAA77xx) or car radio integrated signal processor IC (TEF689x)
• Digital auto alignment circuit for conversion of LC oscillator tuning voltage to controlled alignment voltage of FM antenna tank circuit
• AGC PIN diode drive circuit for FM RF AGC; AGC detection at FM mixer input; the AGC PIN diode current can be set to a fixed value to allow local function for search tuning; AGC threshold is a programmable and keyed function switchable via the I2C-bus
• FM IF linear amplifiers with high dynamic input range
• FM quadrature demodulator with automatic centre frequency adjustment and Total Harmonic Distortion (THD) compensation and level driven soft mute; soft mute characteristic is adjustable via the I2C-bus
• Level detector for AM and FM with temperature compensated output voltage; starting point and slope of level output is programmable via the I2C-bus
• AM RF PIN diode drive circuit; AGC threshold detection at AM mixer 1 and IF2 AGC input; threshold is programmable via the I2C-bus; AM IF2 AGC and demodulator
• AM AF output switchable to provide AM IF2 for AM stereo decoder
• AM noise blanker with blanking at AM IF2
• Several test modes available for fast IC and system tests.

Part Name(s) : TEA6840 TEA6840H
Philips
Philips Electronics
Description : New In Car Entertainment (NICE) car radio

GENERAL DESCRIPTION
The TEA6840H is a single chip car radio tuner for AM and FM intended for microcontroller tuning with the I2C-bus providing the following functions:

• AM double conversion receiver for LW/MW/SW (31 m, 41 m and 49 m bands) with IF1 = 10.7 MHz and IF2 = 450 kHz
• FM single conversion receiver with integrated image rejection for IF = 10.7 MHz capable of selecting US FM, US weather, Europe FM, East Europe FM and Japan FM bands.

FEATURES
• FM mixer for conversion of FM RF from 65 to 108 MHz to IF of 10.7 MHz; the mixer provides inherent image rejection
• FM RF mixer can be set to receive weather band radio up to 162.55 MHz; weather band radio flag output
• AM mixer 1 for conversion of AM RF to AM IF1 10.7 MHz
• LC tuner oscillator providing mixer frequencies for FM mixer and AM mixer 1
• AM mixer 2 for conversion of AM IF1 to AM IF2 450 kHz
• Crystal oscillator providing mixer frequencies for AM mixer 2 and reference for synthesizer PLL, IF count, timing for radio Data System (RDS) update and reference frequency for car audio signal processor IC
• Fast synthesizer PLL tuning system with local control for inaudible RDS updating
• Timing function for RDS update algorithm and control signal output for car audio signal processor ICs (TEA688x, SAA77xx)
• Digital alignment circuit for conversion of LC oscillator tuning voltage to controlled alignment voltage of FM antenna tank circuit
• AGC pin diode drive circuit for FM RF AGC; AGC detection at FM mixer input; the AGC pin diode drive can be activated by the I2C-bus as a local/distance function; AGC threshold is a programmable and keyed function switchable via the I2C-bus
• FM IF linear amplifiers with high dynamic input range
• FM quadrature demodulator with automatic centre frequency adjustment and Total Harmonic Distortion (THD) compensation
• Level detector for AM and FM with temperature compensated output voltage; starting point and slope of level output is programmable via the I2C-bus
• AM RF pin diode drive circuit; AGC threshold detection at AM mixer 1 and IF2 AGC input; threshold is programmable via the I2C-bus; AM IF2 AGC and demodulator
• AM AF output switchable to provide AM IF2 for AM stereo decoder
• AM noise blanker with blanking at AM IF2
• Several test modes available for fast IC and system tests.

NXP
NXP Semiconductors.
Description : New In Car Entertainment (NICE) car radio

GENERAL DESCRIPTION
The TEA6845H is a single IC with car radio tuner for AM and FM intended for microcontroller tuning with the I2C-bus. It provides the following functions:

• AM double conversion receiver for LW, MW and SW (31 m, 41 m and 49 m bands) with IF1 = 10.7 MHz and IF2 = 450 kHz
• FM single conversion receiver with integrated image rejection for IF = 10.7 MHz capable of selecting US FM, US weather, Europe FM, East Europe FM and Japan FM bands.

FEATURES
• FM mixer for conversion of FM RF from 65 to 108 MHz to IF of 10.7 MHz; the mixer provides inherent image rejection
• FM RF mixer can be set to receive weather band radio up to 162.55 MHz; weather band radio flag output
• AM mixer 1 for conversion of AM RF to AM IF1 of 10.7 MHz
• LC tuner oscillator providing mixer frequencies for FM mixer and AM mixer 1
• AM mixer 2 for conversion of AM IF1 to AM IF2 of 450 kHz
• Crystal oscillator providing mixer frequencies for AM mixer 2 and reference for synthesizer PLL, IF count, timing for radio Data System (RDS) update and reference frequency for car audio signal processor ICs
• Fast synthesizer PLL tuning system with local control for inaudible RDS updating
• Timing function for RDS update algorithm and control signal output for car audio signal processor ICs (TEA688x, SAA77xx or TEF689x)
• Digital auto alignment circuit for conversion of LC oscillator tuning voltage to controlled alignment voltage of FM antenna tank circuit
• AGC PIN diode drive circuit for FM RF AGC; AGC detection at FM mixer input; the AGC PIN diode drive can be activated by the I2C-bus as a local or distance function; AGC threshold is a programmable and keyed function switchable via the I2C-bus
• FM IF linear amplifiers with high dynamic input range
• FM quadrature demodulator with automatic centre frequency adjustment and Total Harmonic Distortion (THD) compensation
• Level detector for AM and FM with temperature compensated output voltage; starting point and slope of level output is programmable via the I2C-bus
• AM RF PIN diode drive circuit; AGC threshold detection at AM mixer 1 and IF2 AGC input; threshold is programmable via the I2C-bus; AM IF2 AGC and demodulator
• AM AF output switchable to provide AM IF2 for AM stereo decoder
• AM noise blanker with blanking at AM IF2
• Several test modes available for fast IC and system tests.

Description : 300 to 930MHz Receiver Evaluation Board Description

General Description
The MLX71122 is a multi-channel RF receiver IC based on a double-conversion super-heterodyne architecture. It is designed to receive FSK and ASK modulated RF signals either in 8 predefined frequency channels or frequency programmable via a 3-wire serial programming interface (SPI).
The IC is designed for a variety of applications, for example in the European bands at 433MHz and 868MHz or for the use in North America or Asia, e.g. at 315MHz, 447MHz or 915MHz.

Features
❐ Programmable PLL synthesizer
❐ 8-channel preconfigured or fully programmable SPI mode
❐ Double super-heterodyne receiver architecture with 2nd mixer as image rejection mixer
❐ Reception of FSK, FM and ASK modulated signals
❐ Low shut-down and operating currents
❐ AGC – automatic gain control
❐ On-chip IF filter
❐ Fully integrated FSK/FM demodulator
❐ RSSI for level indication and ASK detection
❐ 2nd order low-pass data filter
❐ Positive and negative peak detectors
❐ Data slicer (with averaging or peak-detector adaptive threshold)
❐ 32-pin Quad Flat No-Lead Package (QFN)
❐ EVB programming software is available on Melexis web site

Application Examples
❐ General digital and analog RF receivers at 300 to 930MHz
❐ Tire pressure monitoring systems (TPMS)
❐ Remote keyless entry (RKE)
❐ Low power telemetry systems
❐ Alarm and security systems
❐ Active RFID tags
❐ Remote controls
❐ Garage door openers
❐ Home and building automation

Part Name(s) : TEA6842H
Philips
Philips Electronics
Description : New In Car Entertainment (NICE) extended car radio

GENERAL DESCRIPTION
The TEA6842H is a single IC with car radio tuner for AM, FM and Weather Band (WB) intended for microcontroller tuning with the I2C-bus. It provides the following functions:
• AM double conversion receiver for LW, MW and SW
   (31 m, 41 m and 49 m bands) with IF1 = 10.7 MHz and
   IF2 = 450 kHz
• FM single conversion receiver with integrated image
   rejection for IF = 10.7 MHz capable of selecting US FM,
   US weather, Europe FM, East Europe FM and Japan
   FM bands
• The tuning system includes FM mixer, AM mixer 1,
   AM mixer 2, crystal oscillator, VCO and PLL synthesizer
   on one chip.

FEATURES
• FM mixer for conversion of FM RF from 65 to 108 MHz
   to IF of 10.7 MHz; the mixer provides inherent image
   rejection
• FM RF mixer can be set to receive weather band radio
   up to 162.55 MHz
• Buffer output for weather band flag
• AM mixer 1 for conversion of AM RF to AM IF1 of
   10.7 MHz
• LC tuner oscillator providing mixer frequencies for
   FM mixer and AM mixer 1
• AM mixer 2 for conversion of AM IF1 to AM IF2 of
   450 kHz
• Crystal oscillator providing mixer frequencies for
   AM mixer 2 and reference for synthesizer PLL, IF count,
   timing for inaudible radio Data System (RDS) update
   and reference frequency for car audio signal
   processor ICs
• Fast synthesizer PLL tuning system with local control for
   inaudible RDS updating
• Timing function for RDS update algorithm and control
   signal output for car audio signal processor ICs
   (TEA688x, SAA77xx) or car radio integrated signal
   processor IC (TEF689x)
• Digital auto alignment circuit for conversion of
   LC oscillator tuning voltage to controlled alignment
   voltage of FM antenna tank circuit
• AGC PIN diode drive circuit for FM RF AGC; AGC
   detection at FM mixer input; the AGC PIN diode current
   can be set to a fixed value to allow local function for
   search tuning; AGC threshold is a programmable and
   keyed function switchable via the I2C-bus
• FM IF linear amplifiers with high dynamic input range (Continue ...)

Part Name(s) : TEA6848H
Philips
Philips Electronics
Description : New In Car Entertainment car radio tuner IC with Precision Adjacent Channel Suppression (NICE-PACS)

GENERAL DESCRIPTION
The TEA6848H is a single IC with car radio tuner for AM, FM and Weather Band (WB) intended for microcontroller tuning with the I2C-bus. It provides the following functions:
• AM double conversion receiver for LW, MW and SW
   (31 m, 41 m and 49 m bands) with IF1 = 10.7 MHz and
   IF2 = 450 kHz
• FM double conversion receiver with integrated image
   rejection for IF1 and for IF2 capable of selecting US FM,
   US weather, Europe FM, East Europe FM and
   Japan FM bands; fully integrated dynamic selectivity at
   450 kHz FM IF2; FM demodulator with dynamic
   threshold extension; centre frequency alignment of IF2
   selectivity via the I2C-bus
• The tuning system includes VCO, crystal oscillator and
   PLL synthesizer on one chip.

FEATURES
• FM mixer 1 for conversion of FM RF (65 to 108 MHz
   and US weather band) to IF of 10.7 MHz; the mixer
   provides inherent image rejection; for European and
   US FM band/WB (weather band) the mixer is driven with
   a ‘high’ injection Local Oscillator (LO); in Japan
   FM band and East Europe FM band the mixer is driven
   with a ‘low’ injection LO
• AM mixer 1 for conversion of AM RF to AM IF1 of
   10.7 MHz
• LC tuner oscillator providing mixer frequencies for
   FM mixer and AM mixer 1
• AM mixer 2 for conversion of AM IF1 to AM IF2 of
   450 kHz
• Crystal oscillator providing mixer frequencies for
   AM mixer 2 and FM mixer 2 and reference for
   synthesizer PLL, IF count, timing for radio Data System
   (RDS) update and reference frequency for car audio
   signal processor ICs
• Fast synthesizer PLL tuning system with local control for
   inaudible RDS updating
• Timing function for RDS update algorithm and control
   signal output for car audio signal processor ICs
   (TEA688x, SAA77xx, TEF689x)
• Digital alignment circuit for bus controlled matching of
   oscillator tuning voltage to FM antenna tank circuit
   tuning voltage
• AGC PIN diode drive circuit for FM RF AGC; AGC
   detection at FM mixer input; the AGC PIN diode drive
   can be activated by the I2C-bus as a local function for
   search tuning; AGC threshold is a programmable and
   keyed function switchable via the I2C-bus
• FM IF linear amplifier with high dynamic input range (Continue ...)

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]