Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Part Name(s) : MPC9893 MPC9893AE
IDT
Integrated Device Technology
Description : 3.3V 1:12 LVCMOS PLL Clock Generator

The MPC9893 is a 2.5 V and 3.3 V compatible, PLL based intelligent dynamic Clock switch and Generator specifically designed for redundant Clock distribution systems. The device receives two LVCMOS Clock signals and generates 12 phase aligned output Clocks. The MPC9893 is able to detect a failing reference Clock signal and to dynamically switch to a redundant Clock signal. The switch from the failing Clock to the redundant Clock occurs Without interruption of the output Clock signal (output Clock slews to alignment). The phase bump typically caused by a Clock failure is eliminated.

Features
• 12-output LVCMOS PLL Clock Generator
• 2.5 V and 3.3 V compatible
• IDCS - on-chip intelligent dynamic Clock switch
• Automatically detects Clock failure
• Smooth output phase transition during Clock failover switch
• 7.5 – 200 MHz output frequency range
LVCMOS compatible inputs and outputs
• External feedback enables zero-delay configurations
Supports networking, telecommunications and computer applications
• Output enable/disable and static test mode (PLL bypass)
Low skew characteristics: maximum 50 ps output-to-output (Within bank)
• 48-lead LQFP package, Pb-free
• Ambient operating temperature range of -40 to 85C
for functional replacement use 87973

ICST
Integrated Circuit Systems
Description : 1:4, DIFFERENTIAL-TO-LVCMOS/LVTTL ZERO DELAY Clock Generator

GENERAL DESCRIPTION
The ICS87004 is a highly versatile 1:4 Differentialto-LVCMOS/LVTTL Clock Generator and a member of the HiPerClockS™ family of High Performance Clock Solutions from ICS. The ICS87004 has two selectable Clock inputs. The CLK0, nCLK0 and CLK1, nCLK1 pairs can accept most standard differential input levels. Internal bias on the nCLK0 and nCLK1 inputs alLows the CLK0 and CLK1 inputs to accept LVCMOS/LVTTL.

FEATURES
• 4 LVCMOS/LVTTL outputs, 7Ω typical output impedance
• Selectable CLK0, nCLK0 or CLK1, nCLK1 Clock inputs
• CLKx, nCLKx pairs can accept the folLowing differential input levels: LVPECL, LVDS, LVHSTL, HCSL, SSTL
• Internal bias on nCLK0 and nCLK1 to Support LVCMOS/LVTTL levels on CLK0 and CLK1 inputs
• Output frequency range: 15.625MHz to 250MHz
• Input frequency range: 15.625MHz to 250MHz
• VCO range: 250MHz to 500MHz
• External feedback for “zero delay” Clock regeneration With configurable frequencies
• Programmable dividers alLow for the folLowing output-to-input frequency ratios: 8:1, 4:1, 2:1, 1:1, 1:2, 1:4, 1:8
• Fully integrated PLL
• Cycle-to-cycle jitter: 45ps (maximum)
• Output skew: 45ps (maximum)
• Static phase offset: 50 ± 125ps (3.3V ± 5%)
• Full 3.3V or 2.5V operating supply
• 5V tolerant inputs
• Lead-Free package available
• Industrial temperature information available upon request

Part Name(s) : MK1704A MK1704ATR K170
ICST
Integrated Circuit Systems
Description : Low EMI Clock Generator

Description
The MK1704A is an upgraded version of the MK1704 and is recommended for all new designs. It offers more reduction in the frequency amplitude peaks, and will Support frequencies up to 140 MHz.

Features
• Packaged in 8 pin SOIC
• Provides a spread spectrum output Clock
Supports leading flat panel controllers
• Accepts a Clock input, provides same frequency dithered output
• Optimized for higher resolutions that require up to 140 MHz, as well as 40 MHz (SVGA) and 65 MHz (XVGA) Clocks
• Peak reduction by 7dB - 14 dB typical on 3rd- 19th odd harmonics
Low EMI feature can be disabled
• 3.3 V or 5 V ±10% supply voltage
• Advanced, Low Power CMOS process
• See the MK1714-01 for a multiplier With Low EMI which can operate from a crystal

Description : 1:4, Differential-to-LVCMOS/LVTTL Zero Delay Clock Generator

General Description
The ICS87004I is a highly versatile 1:4 Differentialto-LVCMOS/LVTTL Clock Generator. The ICS87004I has two selectable Clock inputs. The CLK0, nCLK0 and CLK1, nCLK1 pairs can accept most standard differential input levels. Internal bias on the nCLK0 and nCLK1 inputs alLows the CLK0 and CLK1 inputs to accept LVCMOS/LVTTL. The ICS87004I has a fully integrated PLL and can be configured as a zero delay buffer, multiplier or divider and has an input and output frequency range of 15.625MHz to 250MHz.

Features
• Four LVCMOS/LVTTL outputs, 7Ω typical output impedance
• Selectable CLK0/nCLK0 or CLK1/nCLK1 Clock inputs
• CLKx/nCLKx pairs can accept the folLowing differential input levels: LVPECL, LVDS, LVHSTL, HCSL, SSTL
• Internal bias on nCLK0 and nCLK1 to Support LVCMOS/LVTTL levels on CLK0 and CLK1 inputs
• Output frequency range: 15.625MHz to 250MHz
• Input frequency range: 15.625MHz to 250MHz
• VCO range: 250MHz to 500MHz
• External feedback for “zero delay” Clock regeneration With configurable frequencies
• Programmable dividers alLow for the folLowing output-to-input frequency ratios: 8:1, 4:1, 2:1, 1:1, 1:2, 1:4, 1:8
• Fully integrated PLL
• Cycle-to-cycle jitter: 45ps (maximum)
• Output skew: 65ps (maximum)
• Static phase offset: 50ps ± 150ps (3.3V ± 5%), CLK0/nCLK0
• Full 3.3V or 2.5V output operating supply
• 5V tolerant
• -40°C to 85°C ambient operating temperature
• Available in both standard (RoHS 5) and lead-free (RoHS 6) packages

ICST
Integrated Circuit Systems
Description : ZERO DELAY, DIFFERENTIAL-TO-LVCMOS/LVTTL Clock Generator

GENERALDESCRIPTION

The ICS8705 is a highly versatile 1:8 Differen tial-to-LVCMOS/LVTTL Clock Generator and a member of the HiPerClockS™ family  of  High  Per formance Clock Solutions from ICS. The ICS8705 has two selectable Clock inputs. The CLK1, nCLK1 pair can accept most standard differential input levels. The single ended CLK0 input accepts LVCMOS or LVTTL input levels.The ICS8705 has a fully integrated PLL and can be configured as zero delay buffer, multiplier or divider and has an input and output frequency range of 15.625MHz to 250MHz.



FEATURES

• 8 LVCMOS/LVTTL outputs, 7Ωtypical output impedance

• Selectable CLK1, nCLK1 or LVCMOS/LVTTL Clock inputs

• CLK1, nCLK1 pair can accept the folLowing differential input levels: LVPECL, LVDS, LVHSTL, HCSL, SSTL

• CLK0 input accepts LVCMOS or LVTTL input levels

• Output frequency range: 15.625MHz to 250MHz

• Input frequency range: 15.625MHz to 250MHz

• VCO range: 250MHz to 500MHz

• External feedback for “zero delay” Clock regeneration With configurable frequencies

• Programmable dividers alLow for the folLowing output-to-input frequency ratios: 8:1, 4:1, 2:1, 1:1, 1:2, 1:4, 1:8

• Fully integrated PLL

• Cycle-to-cycle jitter: 45ps (maximum)

• Output skew: CLK0, 65ps (maximum)

                     CLK1, nCLK1, 55ps (maximum)

• Static Phase Offset: 25 ±125ps (maximum), CLK0

• Full 3.3V or 2.5V operating supply

• Lead-Free package available

• Industrial temperature information available upon request


Part Name(s) : MPC9330 MPC9330FA
Motorola
Motorola => Freescale
Description : 3.3V/2.5V 1:6 LVCMOS PLL Clock Generator

The MPC9330 is a 3.3V or 2.5V compatible, 1:6 PLL based Clock Generator targeted for high performance Low-skew Clock distribution in mid-range to high-performance telecomm, networking and computing applications. With output frequencies up to 200 MHz and output skews less than 150 ps1 the device meets the needs of the most demanding Clock applications. The MPC9330 is specified for the extended temperature range of –40°C to +85°C.



Features

• 1:6 PLL based Low-voltage Clock Generator

• 2.5V or 3.3V Power supply

• Generates Clock signals up to 200 MHz

• Maximum output skew of 150 ps1

• On-chip crystal oscillator Clock reference

• Alternative LVCMOS PLL reference Clock input

• Internal and external PLL feedback

• PLL multiplies the reference Clock by 4x, 3x, 2x, 1x, 4/3x, 3/2x, 2/3x, x/2,x/3 or x/4

Supports zero-delay operation in external feedback mode

• Synchronous output Clock stop in logic Low eliminates output runt pulses

Power_down feature reduces output Clock frequency

• Drives up to 12 Clock lines

• 32 lead LQFP packaging

• Ambient temperature range –40°C to +85°C

• Pin and function compatible to the MPC930


Description : 1.25 Gbps Single Mode Transceiver

Features
• SC Duplex Single Mode Transceiver
• Industry Standard 1x9 Footprint
• Gigabit Ethernet Compliant
• Single +3.3/5V Power Supply
• PECL Differential Inputs and Outputs
• PECL/LVPECL Signal Detection Output [C-13-1250-T(3)-SSC(2)]
• TTL/LVTTL Signal Detection Output [C-13-1250C-T(3)-SSC(2)]
• Wave Solderable and Aqueous Washable
• Uncooled laser diode With MQW structure
• Complies With Telcordia (Bellcore) GR-468-CORE
• Gigabit Ethernet Application
• RoHS compliance available

Part Name(s) : MK1705A MK1705ATR
ICST
Integrated Circuit Systems
Description : ATI Low EMI Clock Generator

Description
The MK1705A generates a Low EMI output Clock from a Clock or crystal input. The part is designed to dither the LCD interface Clock or other Clocks for ATI’s flat panel graphics controllers. The device uses ICS/MicroClock’s proprietary mixture of analog and digital Phase-Locked Loop (PLL) technology to synthesize the frequency, and our patented technique to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB.

Features
• Packaged in 8 pin SOIC
• Provides a spread spectrum output Clock
Supports ATI’s flat panel controllers
• Accepts a Clock input, provides same frequency dithered output
• Good for all VGA modes from 40 to 167 MHz
• Peak reduction by 7dB - 14 dB typical on 3rd-19th odd harmonics
Low EMI feature can be disabled
• 3.3 V or 5 V ±10% supply voltage
• Advanced, Low Power CMOS process

Description : Low EMI Clock Generator

Description
The MK1709 generates a Low EMI output Clock from a Clock input. The part is designed to dither the LCD interface Clock for flat panel graphics controllers. The device uses ICS’ proprietary mix of analog and digital Phase Locked Loop (PLL) technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB.

Features
• Packaged in 8-pin SOIC (MK1709S) and in 8-pin TSSOP (MK1709AG)
• 8-pin TSSOP available in lead (Pb) free package
• Provides a spread spectrum output Clock
Supports flat panel controllers
• Guaranteed to +85°C operation
• Accepts a Clock input, provides same frequency dithered output
• Good for all VGA modes from 80 to 167 MHz
• Peak reduction by 7dB - 14dB typical on 3rd - 19th odd harmonics
Low EMI feature can be disabled
• Includes Power-down
• Operating voltage of 3.3 V
• Advanced, Low-Power CMOS process

ICST
Integrated Circuit Systems
Description : Low EMI, Spread Modulating, Clock Generator

Features:
• ICS91719 is a Spread Spectrum Clock targeted for
    Mobile PC and LCD panel applications. Generates an
    EMI optimized Clock signal (EMI peak reduction of
    7-14 dB on 3rd-19th harmonics) through use of Spread
    Spectrum techniques.
• ICS91719 focuses on the Lower input frequency
    range of 14.318 to 80.00 MHz With a spread
    modulation of 20kHz to 40kHz.

Specifications:
• Supply Voltages: VDD = 3.3V ±0.3V
• Frequency range: 14.318 MHz ≤ Fin ≥ 80 MHz
• Cyc to Cyc jitter: <150ps
• Output duty cycle 40/60% (worst case)
• Guarantees +85°C operational condition.
• 16-pin TSSOP package 4.4mm body (173mils), 0.65 mm pitch
• 14.318 MHz crystal input or reference Clock input
• 27MHz, 48MHz and 66MHz reference Clock input

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]