Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Part Name(s) : UTCLMV358
UTC
Unisonic Technologies
Description : General Purpose, Low Voltage, Rail-to-Rail Output Operational Amplifiers

DESCRIPTION
The UTC LMV358 are Low voltage (2.7-5.5V) versions of the dual and quad commodity op amps, LM358, which currently operate at 5-30V. The LMV358 are the most cost effective solutions for the applications where Low voltage operation, space saving and Low price are needed. They offer specifications that meet or exceed the familiar LM358. The LMV358 have Rail-to-Rail Output swing capability and the input common-mode voltage range includes ground. They alll exhibit excellent speed-power ratio, achieving 1 MHz of bandwidth and 1 V/ms of slew rate with Low supply current.

FEATURES
(For V1 =5V and V=0V. Typical Unless Otherwise Noted)
* Guaranteed 2.7V and 5V Performance
* No Crossover Distortion
* Space Saving Package
* Industrial Temp. Range
* Gain-Bandwidth Product
* Low Supply Current: 210mA
* Rail-to-Rail Output Swing @10kW Load V1-10mV V +65mV
* VCM -0.2V to V1 –0.8V

APPLICATIONS
* Active Filters
* General Purpose Low Voltage Applications
* General Purpose Portable Devices

MOSA
MOSA ELECTRONICS
Description : Rail-to-Rail Output, Low Voltage, High Slew Rate, Wide Bandwidth Dual Operational Amplifiers

DESCRIPTION
The MS2100 is high slew rate CMOS operation amplifier optimize for Low Voltage, single supply operation. It designed to be used for General purpose amplifier of General electronic equipment for consumer appliances.

FEATURES
• CMOS rail to rail Output
• 2.7 to 6.5V single supply operation
• Gain-Bandwidth Product : 12MHz
• High slew rate : 6V/s
• No crossover distortion
• Space saving SOP8 package
• Cost efficient
• Pin assignments is the same as the General-purpose dual Operational Amplifiers

APPLICATIONS
• Active filters
• Servo amplifier
• Multimedia system
• Digital to Analog Converter buffers
• Laptop、 Set-Top BOX
• Microphone preamplifier
• Cross-reference to Low voltage application :
   NJM2100, BA4510
   TLV2632, TLV2772
   TS462

Description : General Purpose, Low Voltage, Rail-to-Rail Output Amplifiers

Description

The LMV321 (single), LMV358 (dual), and LMV324 (quad) are a Low cost, voltage feedback Amplifiers that consume only 80µA of supply current per amplifier. The LMV3XX family is designed to operate from 2.7V (±1.35V) to 5.5V (±2.75V) supplies. The common mode voltage range extends beLow the negative rail and the Output provides Rail-to-Rail performance.



Features at +2.7V

• 80µA supply current per channel

• 1.2MHz gain bandwidth product

Output voltage range: 0.01V to 2.69V

• Input voltage range: -0.25V to +1.5V

• 1.5V/µs slew rate

• LMV321 directly replaces other industry standard LMV321 Amplifiers; available in SC70-5 and SOT23-5 packages

• LMV358 directly replaces other industry standard LMV358 Amplifiers; available in MSOP-8 and SOIC-8 packages

• LMV324 directly replaces other industry standard LMV324 Amplifiers; available in TSSOP-14 and SOIC-14 packages

• Fully specified at +2.7V and +5V supplies

• Operating temperature range: -40°C to +125°C



Applications

Low cost General purpose applications

• Cellular phones

• Personal data assistants

• A/D buffer

• DSP interface

• Smart card readers

• Portable test instruments

• Keyless entry

• Infrared receivers for remote controls

• Telephone systems

• Audio applications

• Digital still cameras

• Hard disk drives

• MP3 players


ST-Microelectronics
STMicroelectronics
Description : Output RAIL TO RAIL VERY Low NOISE Operational Amplifiers

DESCRIPTION
The TS97x family Operational Amplifiers is able to operate with voltages as Low as ±1.35V and featuring Output Rail to Rail signal swing. The TS97x boasts characteristics that make them particularly well suited for portable and battery-supplied equipment. Very Low noise and Low distortion characteristics make them ideal for audio pre-amplification.

■ RAIL TO RAIL Output VOLTAGE SWING (±2.4V @ VCC = ±2.5V)
■ VERY Low NOISE LEVEL : 4nV/√  Hz 
■ ULTRA Low DISTORTION : 0.003%
■ HIGH DYNAMIC FEATURES (12MHz, 4V/µs)
■ OPERATING RANGE : 2.7V to 12V
■ ESD PROTECTION (2kV)
■ LATCH-UP IMMUNITY
■ AVAILABLEIN SOT23-5 MICROPACKAGE

APPLICATIONS
■ Portable equipments (CD players, PDA)
■ Portable communications (cell phones, pagers)
■ Instrumentation & sensoring
■ Professional audio circuits

Description : UltraLow Power, Rail-to-Rail Output Operational Amplifiers

General DESCRIPTION

The OP181, OP281 and OP481 are single, dual and quad ultraLow Power, single-supply Amplifiers featuring Rail-to-Rail Outputs. All operate from supplies as Low as 2.0 V and are specified at +3 V and +5 V single supply as well as ±5 V dual supplies.



FEATURES

Low Supply Current: 4 mA/Amplifier max

Single-Supply Operation: 2.7 V to 12 V

Wide Input Voltage Range

Rail-to-Rail Output Swing

Low Offset Voltage: 1.5 mV

No Phase Reversal



APPLICATIONS

Comparator

Battery Powered Instrumentation

Safety Monitoring

Remote Sensors

Low Voltage Strain Gage Amplifiers



 


Description : Low cost Low power input/Output Rail-to-Rail Operational Amplifiers

Description

The LMV321/358/324 family (single, dual and quad) answers the need for Low cost, General purpose Operational Amplifiers. They operate with voltages as Low as 2.7 V and feature both input and Output Rail-to-Rail, 145 µA consumption current and 1 MHz gain bandwidth product (GBP).

With a such Low consumption and a sufficient GBP for many applications, these op-amps are very well-suited for any kind of battery-supplied and portable equipment application.



Features

■ Operating range from VCC = 2.7 V to 6 V

Rail-to-Rail input and Output

■ Extended Vicm (VDD - 0.2 V to VCC + 0.2 V)

Low supply current (145 µA)

■ Gain bandwidth product (1 MHz)

■ ESD tolerance (2 kV)

■ Latch-up immunity

■ Available in SOT23-5 micropackage



Applications

■ Two-cell battery-powered systems

■ Battery-powered electronic equipment

■ Cordless phones

■ Personal medical care (glucose meter)

■ Laptops

■ PDAs

 


ON-Semiconductor
ON Semiconductor
Description : Single and Dual Low Voltage, Rail-to-Rail Input and Output, Operational Amplifiers

The LMV931 Single and LMV932 Dual are CMOS Low−voltage Operational Amplifiers which can operate on single−sided power supplies (1.8 V to 5.0 V) with rail−to−rail input and Output swing. Both devices come in small state−of−the−art packages and require very Low quiescent current making them ideal for battery−operated, portable applications such as notebook computers and hand−held instruments. Rail−to−Rail operation provides improved signal−to−noise performance plus the small packages alLow for closer placement to signal sources thereby reducing noise pickup.
The single LMV931 is offered in space saving SC70−5 package. The dual LMV932 is in a Micro8. These small packages are very beneficial for crowded PCB’s.

Features
• Performance Specified on Single−Sided Power Supply: 1.8 V, 2.7 V, and 5 V
• Small Packages:
   LMV931 in a SC−70
   LMV932 in a Micro8
• No Output Crossover Distortion
• Extended Industrial Temperature Range: −40°C to +125°C
Low Quiescent Current 210 A, Max Per Channel
• No Output Phase−Reversal from Overdriven Input
• These are Pb−Free Devices

Typical Applications
• Notebook Computers, Portable Battery−Operated Instruments, PDA’s
• Active Filters, Low−Side Current Monitoring

Description : Low VOLTAGE RAIL–TO–RAIL Operational Amplifiers

The MC33206/7 family of Operational Amplifiers provide rail–to–rail operation on both the input and Output. The inputs can be driven as high as 200 mV beyond the supply rails without phase reversal on the Outputs and the Output can swing within 50 mV of each rail. This rail–to–rail operation enables the user to make full use of the supply voltage range available. It is designed to work at very Low supply voltages (±0.9 V) yet can operate with a single supply of up to 12 V and ground. Output current boosting techniques provide a high Output current capability while keeping the drain current of the amplifier to a minimum.



• Standby Mode (ID ≤1.0 µA, Typ)

Low Voltage, Single Supply Operation (1.8 V and Ground to 12 V and Ground)

• Rail–to–Rail Input Common Mode Voltage Range

Output Voltage Swings within 50 mV of both Rails

• No Phase Reversal on the Output for Over–Driven Input Signals

• High Output Current (ISC = 80 mA, Typ)

Low Supply Current (ID = 0.9 mA, Typ)

• 600 Ω Output Drive Capability

• Typical Gain Bandwidth Product = 2.2 MHz


Description : Low VOLTAGE RAIL–TO–RAIL Operational Amplifiers

The MC33206/7 family of Operational Amplifiers provide rail–to–rail operation on both the input and Output. The inputs can be driven as high as 200 mV beyond the supply rails without phase reversal on the Outputs and the Output can swing within 50 mV of each rail. This rail–to–rail operation enables the user to make full use of the supply voltage range available. It is designed to work at very Low supply voltages (±0.9 V) yet can operate with a single supply of up to 12 V and ground. Output current boosting techniques provide a high Output current capability while keeping the drain current of the amplifier to a minimum.



• Standby Mode (ID ≤1.0 µA, Typ)

Low Voltage, Single Supply Operation (1.8 V and Ground to 12 V and Ground)

• Rail–to–Rail Input Common Mode Voltage Range

Output Voltage Swings within 50 mV of both Rails

• No Phase Reversal on the Output for Over–Driven Input Signals

• High Output Current (ISC = 80 mA, Typ)

Low Supply Current (ID = 0.9 mA, Typ)

• 600 Ω Output Drive Capability

• Typical Gain Bandwidth Product = 2.2 MHz


Description : Single, Dual, Quad Low-Voltage, Rail-to-Rail Operational Amplifiers

The LMV321, LMV358, and LMV324 are CMOS single, dual, and quad Low voltage Operational Amplifiers with rail−to−rail Output swing. These Amplifiers are a cost−effective solution for applications where Low power consumption and space saving packages are critical. Specification tables are provided for operation from power supply voltages at 2.7 V and 5 V. Rail−to−Rail operation provides improved signal−to−noise preformance. Ultra Low quiescent current makes this series of Amplifiers ideal for portable, battery operated equipment. The common mode input range includes ground making the device useful for Low−side current−shunt measurements. The ultra small packages alLow for placement on the PCB in close proximity to the signal source thereby reducing noise pickup.



Features

• Operation from 2.7 V to 5.0 V Single−Sided Power Supply

• LMV321 Single Available in Ultra Small 5 Pin SC70 Package

• No Output Crossover Distortion

• Industrial temperature Range: −40°C to +85°C

• Rail−to−Rail Output

Low Quiescent Current: LMV358 Dual − 220 A, Max per Channel

• No Output Phase−Reversal from Overdriven Input

• These are Pb−Free Devices



Typical Applications

• Notebook Computers and PDA’s

• Portable Battery−Operated Instruments

• Active Filters


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]