Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : OM7627NM Omnirel
Omnirel Corp => IRF
Description : HERMETIC SURFACE MOUNT ADJUSTABLE NEGATIVE VOLTAGE REGULATORS View

DESCRIPTION
These three terminal NEGATIVE REGULATORS are supplied in a HERMETIC SURFACE MOUNT package. All protective features are designed into the circuit including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over 3.0 amps of output current. These units feature 2% initial VOLTAGE tolerance, with 1.0% load regulation and .015% line regulation.

FEATURES
HERMETIC SURFACE MOUNT Package
• Reference VOLTAGE Set Internally To ±2%
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Product Is Available Hi-Rel Screened

Part Name(s) : OM7632NM OM7633NM OM7634NM Omnirel
Omnirel Corp => IRF
Description : Three Terminal, Fixed VOLTAGE, 1.5 Amp Precision NEGATIVE REGULATORS In HERMETIC View

DESCRIPTION

These three terminal NEGATIVE REGULATORS are supplied in a HERMETICally sealed SURFACE MOUNT package. All protective features are designed into the circuit including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over 1.5 amps of output current. These units feature internally trimmed output VOLTAGEs to ±1% of nominal VOLTAGE. Standard VOLTAGEs are -5V, -12V, and -15V. These units are ideally suited for Military applications where a HERMETIC SURFACE MOUNT package is required.



FEATURES

HERMETIC SURFACE MOUNT Package

• Output VOLTAGEs: -5V, -12V, -15V

• Output VOLTAGEs Set Internally To ±1%

• Built-In Thermal Overload Protection

• Short Circuit Current Limiting

• Product Is Available Hi-Rel Screened


Part Name(s) : OM7636SM Omnirel
Omnirel Corp => IRF
Description : SURFACE MOUNT NEGATIVE ADJUSTABLE 1.0 AMP VOLTAGE REGULATOR View

DESCRIPTION
This three terminal NEGATIVE regulator is supplied in a HERMETICally sealed metal SURFACE MOUNT package. All protective features are designed into the circuit, including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over 1.0 amp of output current. This unit features output VOLTAGEs that can be trimmed using external resistors, from -1.2 volts to -37 volts.

FEATURES
• Isolated HERMETIC SURFACE MOUNT Package
ADJUSTABLE Output VOLTAGE
• Eliminates Stocking Fixed VOLTAGEs
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Product Is Available Hi-Rel Screened
• Electrically Similar To Industry Standard Type LM137

Part Name(s) : OM7628NM IR
International Rectifier
Description : HERMETIC SURFACE MOUNT ADJUSTABLE POSITIVE VOLTAGE REGULATOR View

DESCRIPTION
These three terminal positive REGULATORS are supplied in a HERMETICally sealed SURFACE MOUNT package. All protective features are designed into the circuit including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over 3.0 amps of output current. These units feature 2% initial VOLTAGE tolerance, with 0.3% load regulation and .01% line regulation.

FEATURES
HERMETIC SURFACE MOUNT Package
• Reference VOLTAGE Set To ±2%
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Product Is Available Hi-Rel Screened
• Electrically Similar To Industry Standard Type LM150A


Part Name(s) : OM7500SM OM7501SM OM7502SM OM7503SM OM7504SM OM7505SM OM7506SM OM7507SM OM7508SM OM7509SM Omnirel
Omnirel Corp => IRF
Description : SURFACE MOUNT DUAL POSITIVE AND NEGATIVE FIXED VOLTAGE REGULATORS View

DESCRIPTION
This series of products offers a positive and a NEGATIVE fixed VOLTAGE regulator in one HERMETICally sealed, 6-pin package whose outline is a SURFACE MOUNT type. With heat sinking, they can regulate over 1.5 Amp of output current per device. Standard VOLTAGEs are + or - 5V, 12V, and 15V. Output VOLTAGEs are intermally trimmed to ±2.0% of nominal VOLTAGE. These devices are ideally suited for military applications where small size and high reliability is required.

FEATURES
• Positive And NEGATIVE REGULATORS In One Package
HERMETIC 6-Pin Metal Package, SURFACE MOUNT
• Isolated Case
• Output VOLTAGEs: ±5V, ±12V, And ±15V
• Output VOLTAGEs Set Internally To ±2.0%
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Product Is Available Screened To MIL-PRF-38535, TX, TXV, S Levels

Part Name(s) : OM7621NM OM7622NM OM7623NM OM7624NM Omnirel
Omnirel Corp => IRF
Description : SURFACE MOUNT LOW DROPOUT POSITIVE ADJUSTABLE REGULATORS View

DESCRIPTION
These three terminal positive ADJUSTABLE VOLTAGE REGULATORS in SURFACE MOUNT package are designed to provide 7.5A, 5A, 3A, and 1.5A with higher efficiency than conventional VOLTAGE REGULATORS. The devices are designed to operate to 1 Volt input to output differential and the dropout VOLTAGE is specified as a function of load current. These devices are ideally suited for Military applications where SURFACE MOUNT, small size, HERMETICity and high reliability are required.

FEATURES
SURFACE MOUNT HERMETIC Package
• Operates Down to 1V Dropout, 1.5V @ Max. Current
• .015% Typical Line Regulation
• .01% Typical Load Regulation
• 1% Reference VOLTAGE
• Electrically Equivalent to LT1083, 84, 85 and 86
• Available Hi-Rel Screened

Part Name(s) : IP137SMD LM137SMD IP137ASMD LM137ASMD IP137HVSMD LM137HVSMD IP137AHVSMD LM137AHVSMD Semelab
Semelab - > TT Electronics plc
Description : NEGATIVE ADJUSTABLE VOLTAGE REGULATOR View

DESCRIPTION
The 137 Series REGULATORS are ADJUSTABLE 3 terminal VOLTAGE REGULATORS capable of supplying in excess of -1.5A over an output VOLTAGE range of -1.2V to -37V (HV Series, -47V). The REGULATORS are exceptionally easy to apply requiring only 2 external resistors to set the output VOLTAGE and 1 output capacitor for frequency compensation.

FEATURES
• 1.5A Output Current Guaranteed
• Internal Thermal Overload Protection
• Output Short Circuit Protected
HERMETIC Ceramic SURFACE MOUNT Package
• Screening Options Available

APPLICATIONS
ADJUSTABLE Power Supplies
• System Power Supplies
• Precision VOLTAGE / Current REGULATORS

Part Name(s) : OM185-5SM OM186-5SM IR
International Rectifier
Description : SURFACE MOUNT LOW DROPOUT FIXED VOLTAGE POSITIVE REGULATORS View

DESCRIPTION

These three terminal positive fixed VOLTAGE REGULATORS are designed to provide 2.0 Amps and 1.0 Amp with higher efficiency than conventional VOLTAGE REGULATORS. The devices are designed to operate to 1 Volt input to output differential and the dropout VOLTAGE is specified as a function of load current. All devices are pin compatible with older three terminal REGULATORS. Supplied in easy-to-use HERMETIC SURFACE MOUNT packages.



FEATURES

• +5V Output VOLTAGE

• Operates Down To 1V Dropout

• .015% Line Regulation / .01% Load Regulation Typically

• Output VOLTAGE Trimmed to ±1%

HERMETIC SURFACE MOUNT Package

• Available Hi-Rel Screened



 


Part Name(s) : OM185SM OM185SR OM185NR OM186SM OM186SR OM186NR Omnirel
Omnirel Corp => IRF
Description : SURFACE MOUNT LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR View

DESCRIPTION
These three terminal positive ADJUSTABLE VOLTAGE REGULATORS in a SURFACE MOUNT package are designed to provide 2.0 Amps and 1.0 Amp with higher efficiency than conventional VOLTAGE REGULATORS. The devices are designed to operate to 1 Volt input to output differential and the dropout VOLTAGE is specified as a function of load current. These devices are ideally suited for Hi-Rel applications where SURFACE MOUNT, small size, HERMETICity and high reliability are required.

FEATURES
HERMETIC SURFACE MOUNT Package
• Operates Down To 1V Dropout, 1.5V @ Max. Current
• .020% Line Regulation Typically
• .050% Load Regulation Typically
• 1% Reference VOLTAGE
• Electrically Equivalent To LT1085 And LT1086
• Available Hi-Rel Screened

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]