Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Part Name(s) : SA-1110
Intel
Intel
Description : Intel® StrongARM* SA-1110 Microprocessor

Description
The SA-1110 is a general-purpose, 32-bit RISC microprocessor with a 16 Kbyte instruction cache (Icache), an 8 Kbyte write-back data cache (Dcache), a minicache, a write buffer, a read buffer, an MMU, an LCD controller, and serial I/O combined in a single component. The SA-1110 provides portable applications with High-end computing Performance without requiring users to sacrifice available battery time. Its power-management functionality provides further power savings. For embedded applications, the SA-1110 offers High-Performance computing at consumer electronics pricing with MIPS-per-dollar and MIPS-per-watt advantages. The SA-1110 delivers in price/Performance and power/performance, making it a chice for portable and embedded applications. The SA-1110 differs from the Intel® StrongARM SA-1100 Microprocessor (SA-1100) only in the features of its memory and PCMCIA controller.

Product Features
High Performance
    —150 Dhrystone 2.1 MIPS @ 133 MHz
    —235 Dhrystone 2.1 MIPS @ 206 MHz
■ Memory bus
    —Interfaces to ROM, synchronous mask
        ROM (SMROM), Flash, SRAM, SRAM-like variable latency I/O, DRAM, and synchronous DRAM (SDRAM)
    —Supports two PCMCIA sockets
■ Low power (normal mode) †
    —<240 mW @1.55 V/133 MHz
    —<400 mW @1.75 V/206 MHz
■ 32-way set-associative caches
    —16 Kbyte instruction cache
    —8 Kbyte write-back data cache
■ Integrated clock generation
    —Internal phase-locked loop (PLL)
    —3.686-MHz Oscillator
    —32.768-kHz Oscillator
■ 32-entry MMUs
    —Maps 4 Kbyte, 8 Kbyte, or 1 Mbyte
■ Power-management features
    —Normal (full-on) mode
    —Idle (power-down) mode
    —Sleep (power-down) mode
■ Write buffer
    —8-entry, between 1 and 16 bytes each
■ Big and little endian operating modes
■ Read buffer
    —4-entry, 1, 4, or 8 words
■ 3.3-V I/O interface
■ 256 mini-ball grid array (mBGA)

Part Name(s) : DP0891
DAICO Industries
DAICO Industries
Description : GaAs 5 Section Phase Shifter

FEATURES
■ 1010 - 1110 MHz
■ Constant Insertion Loss
■ 48 nSec Switching Speed
■ TTL Control
■ 38 Pin DIP

Unspecified
Unspecified
Description : High Performance 1-110 MHz Oscillator

[SiTime]

■ Features, Benefits and Applications
■ MEMS Oscillator with LVCMOS/LVTTL compatible output
■ 1-110 MHz frequency range
■ Frequency stability as low as ±20 PPM
■ Typical current consumption of 6.1 mA in active mode
■ Standby or output enable modes
■ 1.8V, 2.5V - 3.3V supply voltage
■ SoftEdgeTM configurable rise/fall time for driving Higher loads or EMI reduction.
■ Four industry-standard packages: 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm
■ All-silicon device with outstanding reliability of 2 FIT, 10x improvement over quartz-based devices
■ Ultra short lead time
■ Ideal for consumer electronics: video, set top boxes, HDTV, DVR, scanners, printers, IP camera, etc.
■ Ideal for High-speed serial protocols: Ethernet, USB, SATA, SAS, Fibre Channel, Firewire, PCI Express

Part Name(s) : DP0881
DAICO Industries
DAICO Industries
Description : GaAs 1 Section Phase Shifter

FEATURES
■ 1030 - 1110 MHz
■ ±3.0 Deg. Phase Accuracy
■ 0.2 mA @ +5 VDC
■ Constant Insertion Loss
■ 26 nSec Switching Speed
■ TTL Control
■ 24 Pin DIP

Unspecified
Unspecified
Description : 1 to 200 MHz High Performance Oscillator

[SiTime Corporation]

Description
The SiT8102 is the next generation of the SiT8002 programmable Oscillator with lower phase noise, lower jitter, and a wider frequency range. SiTime Oscillators are the smallest, High-Performance programmable Oscillator available and are suitable for use in High speed serial communications, consumer, portable, industrial, automotive and computation.

Features
High frequency stability
   • ±10 PPM, ±15 PPM, ±20 PPM
   • ±25 PPM, ±50 PPM, ±100 PPM
• Extremely low RMS phase jitter (random)
   • 0.5 ps (typical)
• Wide frequency range
   • 1 to 200 MHz
• Operating voltage
   • 1.8, 2.5, 2.8V or 3.3 V
   • Other voltages up to 3.63 V (contact SiTime)
• Operating temperature range
   • Industrial, -40 to 85 °C
   • Extended Commercial, -20 to 70 °C
   • Commercial, 0 to 70 °C
• Small footprint
   • 2.5 x 2.0 x 0.75 mm
   • 3.2 x 2.5 x 0.75 mm
   • 5.0 x 3.2 x 0.75 mm
   • 7.0 x 5.0 x 0.90 mm
• All packages are Pb-free and ROHs compliant
High drive option: 30pF load (contact factory)

Benefits
• No crystal or load capacitors required
• Eliminates crystal qualification time
• Ultra-reliable start up and greater immunity from interference
• Replaces expensive single-ended SAW Oscillators
• More cost effective than quartz Oscillators, quartz crystals and clock ICs.
• Completely quartz-free

Applications
• Communications and Networking Applications
• Consumer Electronics Applications
• Automotive Applications
• Industrial Applications
• Gigabit Ethernet
• 10 Gigabit Ethernet
• Fiber Channel
• Ethernet
• SATA/SAS
• USB 2.0
• PCI-Express

Part Name(s) : MSA-1110
HP => Agilent Technologies
HP => Agilent Technologies
Description : Cascadable Silicon Bipolar MMIC Amplifier

Description
The MSA-1110 is a High Performance silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a hermetic High reliability package. This MMIC is designed for High dynamic range in either 50 or 75␣ Ω systems by combining low noise figure with High IP3. Typical applications include narrow and broadband linear amplifiers in industrial and military systems.

Features
High Dynamic Range Cascadable 50␣ Ω or 75␣ Ω Gain Block
• 3␣ dB Bandwidth: 50␣ MHz to 1.6␣ GHz
• 17.5 dBm Typical P1␣ dB at 0.5␣ GHz
• 12 dB Typical 50␣ Ω Gain at 0.5␣ GHz
• 3.5␣ dB Typical Noise Figure at 0.5␣ GHz
• Hermetic Gold-ceramic Microstrip Package

Part Name(s) : MSA-1110
HP => Agilent Technologies
HP => Agilent Technologies
Description : Cascadable Silicon Bipolar MMIC Amplifier (Rev - V2)

Description
The MSA-1110 is a High Performance silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a hermetic High reliability package. This MMIC is designed for High dynamic range in either 50 or 75 Ω systems by combining low noise figure with High IP3. Typical applications include narrow and broadband linear amplifiers in industrial and military systems.

Features
High Dynamic Range Cascadable 50 Ω or 75 Ω Gain Block
• 3 dB Bandwidth: 50 MHz to 1.6 GHz
• 17.5 dBm Typical P1 dB at 0.5 GHz
• 12 dB Typical 50 Ω Gain at 0.5 GHz
• 3.5 dB Typical Noise Figure at 0.5 GHz
• Hermetic Gold-ceramic Microstrip Package

Part Name(s) : MT1110
Unspecified
Unspecified
Description : 75Ω BROADBAND AMPLIFIER ADVANCE DATA SHEET

[MICROTUNE]

OVERVIEW
The Microtune 1110 (MT1110) broadband amplifier is a 75Ω internally matched amplifier designed for broadband CATV distribution and infrastructure applications. The MT1110 is built using High Performance silicon-germanium (SiGe) technology and offers 15 dB gain with an industry best noise figure of 3.0 dB. It achieves a third order intercept point of 80 dBmV while drawing the industry’s lowest current, 70 mA, from a single 5V supply.

FEATURES
• Cascadable 75Ω gain block
• 15 dB Gain
• 3 dB Noise figure
• Unconditionally stable
• 20 dB Input return loss
• 1 MHz to 2000 MHz 3 dB bandwidth
• +0.5 dB Gain tilt from 50 MHz to 850 MHz
• Typical OIP3 at 70 mA is 80 dBmV at 850 MHz
• Single +5V supply
• 70 mA Current consumption
• SOT-89 Package
• Industry standard pin-out for drop in compatibility

APPLICATIONS
• Set-top box
• Home gateways
• CATV Broadband distribution
• Cable splitters
• Laser drivers
• Optical receivers

Part Name(s) : 1100
3M
3M
Description : Disposable Ear Plugs

3M™ 1100 Foam Ear Plugs
3M™ 1110 Corded Foam Ear Plugs

Information:
A range of information must be provided on the packaging. The packaging of the 3M 1100/1110 Ear Plugs complies with the requirements of EN352-2:2002. A copy of this European standard can be purchased from your national standards body.

Main Features:
• Soft disposable polyurethane foam ear plugs providing extra comfort.
• The tapered shape is designed to adjust to most ear canals.
• They are made from soft hypo-allergenic material.
• The bright orange colour permits High visibility and makes safety checks easier.

Applications:
The 3M 1100/1110 - Ear Plugs can be used in may industries where harmful noise is present such as:
   • Metal Industry
   • Automotive
   • Textile
   • Construction
   • Aircraft
   • Woodworking
   • Printing

Part Name(s) : MT1110
Unspecified
Unspecified
Description : 75Ω BROADBAND AMPLIFIER ADVANCE DATA SHEET

[MICROTUNE]

OVERVIEW
The Microtune 1110 (MT1110) broadband amplifier is a 75Ω internally matched amplifier designed for broadband CATV distribution and infrastructure applications. The MT1110 is built using High Performance silicon-germanium (SiGe) technology and offers 15 dB gain with an industry best noise figure of 3.0 dB. It achieves a third order intercept point of 80 dBmV while drawing the industry’s lowest current, 70 mA, from a single 5V supply.

FEATURES
• Cascadable 75Ω gain block
• 15 dB Gain
• 3 dB Noise figure
• Unconditionally stable
• 20 dB Input return loss
• 1 MHz to 2000 MHz 3 dB bandwidth
• +0.5 dB Gain tilt from 50 MHz to 850 MHz
• Typical OIP3 at 70 mA is 80 dBmV at 850 MHz
• Single +5V supply
• 70 mA Current consumption
• SOT-89 Package
• Industry standard pin-out for drop in compatibility

APPLICATIONS
• Set-top box
• Home gateways
• CATV Broadband distribution
• Cable splitters
• Laser drivers
• Optical receivers

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]