Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : High Voltage CMOS Logic ICs

General-purpose CMOS Logic IC Series (BU4S,BU4000B Series)

High Voltage CMOS Logic ICs Analog Switch



●Description

BU4066BC series ICs each contain 4 independent switches capable of controlling either digital or analog signals. BU4051BC / BU4052BC / BU4053BC / and BU4551B series ICs are analog selectable composite multiplexer/demultiplexer. BU4051BC series is configured with 8 channels, BU4052BCis configured with two 4 channels,BU4053BC series is configured with three 2 channels, BU4551B series is configured with four 2 channels, and switches applicable for each channel are turned on according to digital signals of control terminal. Even if the Logic amplitude (VDD-VSS) of the control signal is small, signals of large amplitude (VDD-VEE) can be switched.



●Features

 1)  Low power consumption

 2)  Wide operating supply Voltage (3[V]~18[V])

 3)  High input impedance

 4)  L-TTL2 input and LS-TTL1 can be driven directly.

 5)  Applicable channel switches can be turned “ON” and “OFF” by the digital control signal.

 6)  Small control Voltage (VDD-VSS) can control signals of large amplitude (VDD-VEE).

 7)  Linearity with excellent transfer characteristICs



 


System-Logic
System Logic Semiconductor
Description : Strobed Hex Inverter/Buffer High-Voltage Silicon-Gate CMOS

Strobed Hex Inverter/Buffer High-Voltage Silicon-Gate CMOS

The SL4502B consists of six inverter/buffers with 3-state outputs. A logic “1” on the OUTPUT ENABLE input produces a High impedance state in all six outputs. This feature permits common busing of the outputs, thus simplifying system design. A logic “1” on the DIRECTION input switches all six outputs to logic “0” if the OUTPUT ENABLE input is a logic “0”.

 • Operating Voltage Range: 3.0 to 18 V
 • Maximum input current of 1 μA at 18 V over full package temperature range; 100 nA at 18 V and 25°C
 • Noise margin (over full package temperature range):
    1.0 V min @ 5.0 V supply
    2.0 V min @ 10.0 V supply
    2.5 V min @ 15.0 V supply

Exar
Exar Corporation
Description : Low Voltage CMOS 12-Bit High-Speed Analog-to-Digital Converter with Serial Logic Interface Port

Low Voltage CMOS 12-Bit High-Speed Analog-to-Digital Converter with Serial Logic Interface Port

System-Logic
System Logic Semiconductor
Description : Quad 3-State R/S Latch High-Voltage Silicon-Gate CMOS

Quad 3-State R/S Latch High-Voltage Silicon-Gate CMOS

The SL4043B types are quad cross-coupled 3-state CMOS NOR latces. Each latch has a separate Q output and individual SET and RESET inputs. The Q outputs are controlled by a common ENABLE input. A logic “1” or High on the ENABLE input connects the latch states to the Q outputs. A logic “0” or low on the ENABLE input disconnects the latch states from the Q outputs, resulting in an open circuit condition on the Q outputs. The open circuit feature allows common busing of the outputs.

 • Operating Voltage Range: 3.0 to 18 V
 • Maximum input current of 1 μA at 18 V over full package temperature range; 100 nA at 18 V and 25°C
 • Noise margin (over full package temperature range):
    1.0 V min @ 5.0 V supply
    2.0 V min @ 10.0 V supply
    2.5 V min @ 15.0 V supply

Description : Voltage Detector ICs / Bipolar Voltage Detector ICs

The BD47□□G Series is a reset IC that was developed to prevent system errors at transient state when the power of CPU or Logic circuit switches ON/OFF or momentary shut down. These ICs consist of three terminals (power supply, GND and reset output) to detect power supply Voltages and outputs reset signals of various systems. These ICs are ultra-compact and are realized low current consumption, making them ideal for portable products. 




System-Logic
System Logic Semiconductor
Description : Hex Buffer/Converter High-Voltage Silicon-Gate CMOS

The SL4049B is inverting hex buffers and feature logic-level conversion using only one supply (Voltage (VCC). The input-signal High level (VIH) can exceed the VCC supply Voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL/TTL converters.

• Operating Voltage Range: 3.0 to 18 V
• Maximum input current of 1 mA at 18 V over full package temperature range; 100 nA at 18 V and 25°C
• Noise margin (over full package temperature range):
    0.5 V min @ 5.0 V supply
    1.0 V min @ 10.0 V supply
    1.0 V min @ 15.0 V supply
High-to-low level conversion

System-Logic
System Logic Semiconductor
Description : Hex Inverter High-Voltage Silicon-Gate CMOS

Hex Inverter High-Voltage Silicon-Gate CMOS

The SL4069UB types consist of six inverter circuits. These devices are intended for all general-purpose inverter applications where the medium-power TTL-drive and logic-level-conversion capabilities of circuits such as the SL4049UB Hex Inverter/Buffers are not required. Each of the six inverters is a single stage

 • Operating Voltage Range: 3.0 to 18 V
 • Maximum input current of 1 μA at 18 V over full package temperature range; 100 nA at 18 V and 25°C
 • Noise margin (over full package temperature range):
    0.5 V min @ 5.0 V supply
    1.0 V min @ 10.0 V supply
    1.0 V min @ 15.0 V supply

Part Name(s) : CD4504BMS
Intersil
Intersil
Description : CMOS Hex Voltage Level Shifter for TTL-to-CMOS or CMOS-to-CMOS Operation

Description

CD4504BMS hex Voltage level shifter consists of six circuits which shift input signals from the VCC Logic level to the VDD Logic level. To shift TTL signals to CMOS Logic levels, the SELECT input is at the VCC High Logic state. When the SELECT input is at a LOW Logic state, each circuit translates signals from one CMOS level to another.



Features

High Voltage Type (20V Rating)

• Independence of Power Supply Sequence Considerations

- VCC can Exceed VDD

- Input Signals can Exceed Both VCC and VDD

• Up and Down Level Shifting Capability

• Shiftable Input Threshold for Either CMOS or TTL Compatibility

• 100% Tested for Quiescent Current at 20V

• 5V, 10V and 15V Parametric Ratings

• Standardized Symmetrical Output CharacteristICs

• Maximum Input Current of 1µA at 18V Over Full Pack age Temperature Range; 100nA at 18V and +25°C

• Meets All Requirements of JEDEC Tentative Standard No. 13B, “Standard Specifications for Description of ‘B’ Series CMOS Devices”


System-Logic
System Logic Semiconductor
Description : Dual 2-Bit Transparent Latch High-Performance Silicon-Gate CMOS

Dual 2-Bit Transparent Latch
High-Performance Silicon-Gate CMOS

The SL74HC75 is identical in pinout to the LS/ALS75. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs.
This device consists of two independent 2-bit transparent latches and can be used as temporary storage for binary information between processing units and input/output or indicator units. Each latch stores the input data while Latch Enable is at a logic low. The outputs follow the data inputs when Latch Enable is at a logic High.

 • Outputs Directly Interface to CMOS, NMOS, and TTL
 • Operating Voltage Range: 2.0 to 6.0 V
 • Low Input Current: 1.0 μA
 • High Noise Immunity Characteristic of CMOS Devices

Toshiba
Toshiba
Description : DC Motor Full Bridge Driver ICs (Forward/reverse switching driver ICs)

The TA84007PQ, TA84007SG and TA84007FG are bridge driver ICs designed for forward/reverse rotation switching and that are capable of four modes of control (forward, reverse, stop and brake).

The TA84007PQ has an output current of 1.0 A (AVE.) and 2.0 A (PEAK) and the TA84007SG and TA84007FG have an output current of 0.4 A (AVE.) and 1.2 A (PEAK).

These driver ICs are equipped with a dual power supply pin on the output and control sides and a Vref pin on the output side capable of controlling motor Voltage making it possible to adjust the Voltage applied to the motor. Additionally, these driver ICs have a low input current and can connect directly to the CMOS.



Features

• Operation power supply Voltage range:

VCC (opr.) = 4.5 to 27 V

VS (opr.) = 4.5 to 27 V

Vref (opr.) = 4.5 to 27 V

Usage Note: Design your application so that Vref ≤ VS

• Output current: PQ: 1.0 A (AVE.), 2.0 A (PEAK)

                        SG and FG: 0.4 A (AVE.), 1.2 A (PEAK)

• Built-in thermal shutdown and overcurrent protection

• Built-in back EMF suppression diode

• Built-in input hysteresis

• Built-in standby


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]