Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : AT24CS04 AT24CS04-MA11M-T AT24CS04-MAHM-T AT24CS04-MAUM-T AT24CS04-SS11M-T AT24CS04-SSHM-T AT24CS04-SSUM-T AT24CS04-ST11M-T AT24CS04-STHM-T AT24CS04-STUM-T Atmel
Atmel Corporation
Description : I2C-Compatible (2-wire) Serial EEPROM with a Unique, Factory Programmed 128-bit Serial Number 4-Kbit (512 x 8), 8-Kbit (1024 x 8) View

Description

The Atmel® AT24CS04 and AT24CS08 provides 4096/8192 bits of Serial Electrically Erasable and Programmable LButtonRead-only Memory (EEPROM) organized as 512/1024 words of eight bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT24CS04/08 is available in space-saving, 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN and 5-lead SOT23 packages and is accessed via a 2-wire Serial interface. In addition, both devices fully operate from 1.7V to 5.5V VCC.



Standard Features

• Low-voltage operation

 VCC = 1.7V to 5.5V

• Internally organized as 512 x 8 (4-Kbit) or 1024 x 8 (8-Kbit)

I2C-Compatible (2-wire) Serial interface

• Schmitt Trigger, filtered inputs for noise suppression

• Bidirectional data transfer protocol

• 400kHz (1.7V) and 1MHz (2.5V, 2.7, 5.0V) compatibility

• Write Protect pin for hardware data protection

• 16-byte page write mode

   • Partial page writes allowed

• Self-timed write cycle (5ms max)

• High-reliability

   • Endurance: 1,000,000 write cycles

   • Data retention: 100 years

• Green package options (Pb/Halide-free/RoHS-compliant)

   • 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, and 5-lead SOT23

• Die sale options: wafer form and tape and reel available



Enhanced Features in the CS Serial EEPROM Series

• All standard features supported

128-bit unique Factory-Programmed Serial Number

• Permanently locked, read-only value

• Stored in a separate memory area

• Guaranteed unique across entire CS Series of Serial EEPROMs



 


Part Name(s) : AT24CS01 AT24CS01-MA11M-T AT24CS01-MAHM-T AT24CS01-MAUM-T AT24CS01-SS11M-T AT24CS01-SSHM-T AT24CS01-SSUM-T AT24CS01-ST11M-T AT24CS01-STHM-T AT24CS01-STUM-T Atmel
Atmel Corporation
Description : I2C-Compatible (2-wire) Serial EEPROM with a Unique, Factory Programmed 128-bit Serial Number View

 Description

The Atmel®AT24CS01 and AT24CS02 provides 1024/2048 bits of Serial Electrically Erasable and Programmable Read-only Memory (EEPROM) organized as 128/256 words of eight bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT24CS01/02 is available in space-saving, 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN and 5-lead SOT23 packages and is accessed via a 2-wire Serial interface. In addition, both devices fully operate from 1.7V to 5.5V VCC.


Part Name(s) : 24AA256UID 24AA256UID-I/P 24AA256UID-I/SN 24AA256UID-I/ST 24AA256UIDT-I/P 24AA256UIDT-I/SN 24AA256UIDT-I/ST 24AA256UIDT Microchip
Microchip Technology
Description : 256K I2C Serial EEPROM with EUI-48™, EUI-64™ and Unique 32-Bit Serial Number View

Description
The Microchip Technology Inc. 24AA256UID is a 32K x 8 (256 Kbit) Serial Electrically Erasable PROM with pre-Programmed EUI-48 and EUI-64 node addresses and a 32-bit Unique ID, capable of operation across a broad voltage range (1.7V to 5.5V). This device also has a page write capability of up to 64 bytes of data. This device is available in the standard 8-pin plastic DIP, SOIC and TSSOP packages.

Features
• Pre-Programmed 32-Bit Serial Number:
   - Unique across all UID-family EEPROMs
   - Scalable to 48-bit, 64-bit, 128-bit, 256-bit,
      and other lengths
• Pre-Programmed Globally Unique, 48-bit or 64-bit
   Node Address:
   - Compatible with EUI-48™ and EUI-64™
• Codes Stored in Permanently Write-Protected
   Upper 1/8th of EEPROM Array
• Single Supply with Operation Down to 1.7V
• Low-Power CMOS Technology:
   - Active current 400 µA, typical
   - Standby current 100 nA, typical
2-wire Serial Interface, I2C Compatible
• Cascadable up to Eight Devices
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz and 400 kHz Clock Compatibility
• Page Write Time 5 ms Maximum
• Self-Timed Erase/Write Cycle
• 64-Byte Page Write Buffer
• ESD Protection >4000V
• More than One Million Erase/Write Cycles
• Data Retention >200 years
• Packages Include 8-lead PDIP, SOIC and TSSOP
• RoHS Compliant
• Temperature Ranges:
   - Industrial (I): -40°C to +85°C

Part Name(s) : 24AA025UID 24AA025UIDT 24AA02UID 24AA02UIDT 24AA02UID-I/P 24AA02UID-I/SN 24AA02UID-I/OT 24AA02UIDT-I/P 24AA02UIDT-I/SN 24AA02UIDT-I/OT Microchip
Microchip Technology
Description : 2K I2C™ Serial EEPROMs with Unique 32-bit Serial Number View

Description:
The Microchip Technology Inc. 24AA02UID/24AA025UID (24AA02XUID*) is a 2 Kbit Electrically Erasable PROM with a preProgrammed, 32-bit unique ID. The device is organized as two blocks of 128 x 8-bit memory with a 2-wire Serial interface.

Features:
• PreProgrammed 32-Bit Serial Number:
    - Unique across all UID-family EEPROMs
    - Scalable to 48-bit, 64-bit, 128-bit, 256-bit, and other lengths
• Single Supply with Operation Down to 1.7V
• Low-Power CMOS Technology:
    - Read current 1 mA, max.
    - Standby current 1 A, max.
2-wire Serial Interface, I2C™ Compatible
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz and 400 kHz Clock Compatibility
• Page Write Time 3 ms, typical
• Self-Timed Erase/Write Cycle
• Page Write Buffer:
    - 8-byte page (24AA02UID)
    - 16-byte page (24AA025UID)
• ESD Protection >4,000V
• More than 1 Million Erase/Write Cycles
• Data Retention >200 Years
Factory Programming Available
• Available Packages:
    - 8-lead PDIP, 8-lead SOIC, and 5-lead SOT-23 (24AA02UID)
    - 8-lead PDIP, 8-lead SOIC, and 6-lead SOT-23 (24AA025UID)
• RoHS Compliant
• Temperature Ranges:
    - Industrial (I): -40°C to +85°C


Part Name(s) : BR24C01A-W BR24C01AF-W BR24C01AFJ-W BR24C01AFV-W BR24C02-W BR24C02F-W BR24C02FJ-W BR24C02FV-W BR24C04-W BR24C04F-W ROHM
ROHM Semiconductor
Description : I2C BUS compatible Serial EEPROM View

The BR24C01A-W, BR24C02-W, and BR24C04-W series are 2-wire (I2C BUS type) Serial EEPROMs which are electrically programmable.

Features
1) 128×8bits (1k) Serial EEPROM.
   (BR24C01A-W / AF-W / AFJ-W / AFV-W)
      256×8bits (2k) Serial EEPROM.
   (BR24C02-W / F-W / FJ-W / FV-W)
      512×8bits (4k) Serial EEPROM.
   (BR24C04-W / F-W / FJ-W / FV-W)
2) Two wire Serial interface.
3) Operating voltage range : 2.7V∼5.5V
4) Low current consumption
   Active (at 5V) : 1.5mA (Typ.)
   Standby (at 5V) : 0.1µA (Typ.)
5) Auto erase and auto complete functions can be used
   during write operations.
6) Page write function.
   BR24C01A-W / AF-W / AFJ-W / AFV-W : 8 bytes
   BR24C02-W / F-W / FJ-W / FV-W : 8 bytes
   BR24C04-W / F-W / FJ-W / FV-W : 16 bytes
7) DATA security
   Write protect feature
   Inhibit to WRITE at low VCC
8) Noise filters at SCL and SDA pins.
9) Address can be incremented automatically during
   read operations.
10) Compact packages.
11) Rewriting possible up to 100,000 times
12) Data can be stored for ten years without corruption.

Applications
   VCRs, TVs, printers, car stereos, cordless telephones, short wave radios, programmable DIP switches

Part Name(s) : DS2411 DS2411P DS2411P/TR DS2411R/TR DS2411X DS2411R Dallas
Dallas Semiconductor -> Maxim Integrated
Description : Silicon Serial Number with VCC Input View

DESCRIPTION
The DS2411 silicon Serial Number is a low-cost, electronic registration Number with external power supply. It provides an absolutely unique identity that can be determined with a minimal electronic interface (typically, a single port pin of a microcontroller). The DS2411’s registration Number is a Factory-lasered, 64-bit ROM that includes a unique 48-bit Serial Number, an 8-bit CRC, and an 8-bit family code (01h). Data is transferred Serially through the Dallas Semiconductor’s 1-Wire protocol. The external power supply is required, extending the operating voltage range of the device below typical 1-Wire devices.

FEATURES
Unique, Factory-Lasered and Tested 64-Bit Registration Number (8-Bit Family Code Plus 48-Bit Serial Number Plus 8-Bit CRC Tester); Guaranteed No Two Parts Alike
■ Standby Current <1µA
■ Built-In Multidrop Controller Enables Multiple DS2411s to Reside on a Common 1-Wire® Network
■ Multidrop Compatible with Other 1-Wire Products
■ 8-Bit Family Code Identifies Device as DS2411 to the 1-Wire Master
■ Low-Cost TSOC, SOT23-3, and Flip-Chip Surface-Mount Packages
■ Directly Connects to a Single-Port Pin of a Microprocessor and Communicates at up to 15.4kbps
■ Overdrive Mode Boosts Communication Speed to 125kbps
■ Operating Range: 1.5V to 5.25V, -40°C to +85°C

Part Name(s) : DS2411 DS2411P+ DS2411P+TR DS2411R+TR DS2411R-TR DS2411P DS2411P-TR DS2411X MaximIC
Maxim Integrated
Description : Silicon Serial Number with VCC Input View

DESCRIPTION
The DS2411 silicon Serial Number is a low-cost, electronic registration Number with external power supply. It provides an absolutely unique identity that can be determined with a minimal electronic interface (typically, a single port pin of a microcontroller). The DS2411’s registration Number is a Factory-lasered, 64-bit ROM that includes a unique 48-bit Serial Number, an 8-bit CRC, and an 8-bit family code (01h). Data is transferred Serially through the Maxim 1-Wire protocol. The external power supply is required, extending the operating voltage range of the device below typical 1-Wire devices.

FEATURES
Unique, Factory-Lasered and Tested 64-Bit Registration Number (8-Bit Family Code Plus 48-Bit Serial Number Plus 8-Bit CRC Tester); Guaranteed No Two Parts Alike
■ Standby Current <1μA
■ Built-In Multidrop Controller Enables Multiple DS2411s to Reside on a Common 1-Wire Network
■ Multidrop Compatible with Other 1-Wire Products
■ 8-Bit Family Code Identifies Device as DS2411 to the 1-Wire Master
■ Low-Cost TSOC, SOT23-3, and Flip-Chip Surface-Mount Packages
■ Directly Connects to a Single-Port Pin of a Microprocessor and Communicates at up to 15.4kbps
■ Overdrive Mode Boosts Communication Speed to 125kbps
■ Operating Range: 1.5V to 5.25V, -40°C to +85°C

Part Name(s) : DS24B33 DS24B33 DS24B33-R DS24B33-T DS24B33-TR DS24B33G DS24B33Q DS24B33S DS24B33S DS24B33S-R MaximIC
Maxim Integrated
Description : 4Kb 1-Wire EEPROM with 200k Write/Erase Cycles View

General Description

The DS24B33 is a 4096-bit, 1-Wire® EEPROM organized as 16 memory pages of 256 bits each. Data is written to a 32-byte scratchpad, verified, and then copied to the EEPROM memory. The DS24B33 communicates over a single-conductor 1-Wire bus. The communication follows the standard 1-Wire protocol. Each device has its own unalterable and unique 64-bit registration Number that is Factory Programmed into the chip. The registration Number is used to address the device in a multidrop 1-Wire net environment. The EEPROM provides 200,000 cycles of write/erase endurance at +25°C. The DS24B33 is software compatible to the DS2433.



Features

♦4096 Bits of Nonvolatile EEPROM Partitioned Into Sixteen 256-Bit Pages

♦Read and Write Access is Highly Backward Compatible to the DS2433

♦256-Bit Scratchpad with Strict Read/Write Protocols Ensures Integrity of Data Transfer

♦200,000 Write/Erase Cycle Endurance at +25°C

Unique, Factory-Programmed, 64-Bit Registration Number Ensures Error-Free Device Selection and Absolute Part Identity

♦Switchpoint Hysteresis to Optimize Performance in the Presence of Noise

♦Communicates to Host at 15.4kbps or 125kbps Using 1-Wire Protocol

♦Low-Cost Through-Hole and SMD Packages

♦Operating Range: +2.8V to +5.25V, -40°C to +85°C

♦IEC 1000-4-2 Level 4 ESD Protection (±8kV Contact, ±15kV Air, Typical) for IO Pin


Part Name(s) : BR24E08F BR24C08 BR24C08F BR24C08FJ BR24C08FV BR24C16 BR24C16F BR24C16FJ BR24C16FV BR24E16 ROHM
ROHM Semiconductor
Description : I2C BUS compatible Serial EEPROM View

The BR24C08, BR24C16 and BR24E16 series are 2-wire (I2C BUS type) Serial EEPROMs which are electrically programmable.

Features
1) 1k x 8 bits Serial EEPROM. (BR24C08 / F / FJ / FV) 2k x 8 bits Serial EEPROM. (BR24C16 / F / FJ / FV, BR24E16 / F / FJ / FV)
2) Two wire Serial interface. (2Byte Address : BR24E16)
3) Operating voltage range : 2.7V∼5.5V
4) Low current consumption
    Active (at 5V) : 2.0mA (Typ.)
    Standby (at 5V) : 1.0µA (Typ.)
5) Auto erase and auto complete functions can be used during write operations.
6) Page write function : 16byte
7) DATA security Write protect feature Inhibit to WRITE at low Vcc
8) Noise filters at SCL and SDA pins.
9) Address can be incremented automatically during read operations.
10) Compact packages.
11) Rewriting possible up to 100,000 times.
12) Data can be stored for ten years without corruption.

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]