DESCRIPTION
The popular 1N5221 thru 1N5281B series of 0.5 watt Zener Voltage Regulators provides a selection from 2.4 to 200 volts in standard 5% or 10% tolerances as well as tighter tolerances identified by different suffix letters on the part number.

FEATURES
• JEDEC registered 1N5221 to 1N5281B
• Internal bonds optionally available with “-1” suffix
• Options for screening in accordance with MIL-PRF- 19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers with “-1” suffix.
• Surface mount equivalents available as MLL5221 to MLL5281B in the DO-213AA MELF style package including “-1” suffix options (consult factory for others)
• RoHS Compliant devices available by adding “e3” suffix
• DO-7 glass body axial-leaded Zener equivalents are also available

APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating current and temperature range
• Extensive selection from 2.4 to 200 V
• Standard voltage tolerances are plus/minus 5% with B suffix, 10 % with A suffix identification
• Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD (MIL-STD-750 Method 1020)
• Minimal capacitance (see Figure 2)
• Inherently radiation hard per MicroNote 050

■ Features
1. Broad Variations of Stacking Height
    In addition to 0.5mm pitch ultra-miniature size connector, the stacking height of 3mm, 3.5mm, 4mm, and 5mm are provided.
2. Corresponding to Automatic Mounting
    The connector has the vacuum pick-up area to enable automatic mounting with the embossed tape packaging.
3. Metal Fitting Available
    The product including the metal fitting to prevent solder peeling is provided, considering the mounting on FPC.

■ Applications
    Mobile phone, LCD(Liquid Crystal Display), MO(Optical Disk), Note PC

EFC Series 1313 are metallized polyester capacitors. This series offers the advantage of small size, self healing and low cost. Suggested applications include: medical electronics, telecommunications and high voltage power supplies. Packaging options include: wrap and fill (TF, TC), radial lead Box (EFR), axial lead (EC, EF). Application options include: high voltage (HV), "AC" across the line (AC), noise suppression (RC) and switching power supply (SP).
   
1. TEMPERATURE RANGE
    - 55 °C to + 85 °C at rated voltage.
    To 125 °C at 50% derating.
2. CAPACITANCE
    Capacitors < 1.0 MFD shall be measured
    at 1 KHz + 20 HZ. Capacitors >1.0 MFD
    shall be measured at 120 HZ. Measurements
    shall be taken at 25 °C.
3. DIELECTRIC STRENGTH
    At 25 °C, 150% of rated voltage when applied
    terminal to terminal for one minute through a
    current limiting resistance.
4. INSULATION RESISTANCE
    At 25 °C after 2 minutes charge time at rated voltage
    or 500 VDC, whichever is less, the minimum IR shall
    be 30,000 Megohm-Microfarad, but need not exceed
    50,000 Megohms for voltages greater than 50 VDC,
    and 15,000 Megohm-Microfarads, but need not exceed
    30,000 Megohms for 50 VDC or less.
5. HUMIDITY RESISTANCE
    Series 1313 shall meet the requirements
    of MIL-STD. 202C, Method 103B.
6. DISSIPATION FACTOR
    Shall be 1.0 % max. when measured as in Par. 2.
7. LIFE TEST
    Will withstand the application of 150% rated voltage at +125 °C for 250 hours
    with not more than one failure in 12 permitted.
   

■ Features
1. Ease of Use and Space Savings
   Only one finger or 6.9N (Newtons) of force is required to lock Hirose’s rotational actuator (flip-lock) as compared to using 2 fingers and 39.2N to close a FFC/FPC connector from our competition.
   The Flip-Lock design also allows customers to place 2 or more connectors side by side as there is no need to waste additional board space for a side latch.
2. Strengthened Flip-lock Actuator
   The standard Flip-Lock requires only 2.0mm height above the board. A strengthened lock lever is available which only requires an additional 0.4mm.
3. Supports Thin FPC (0.18mm)
   Hirose does not require double-sided FPC to have any additional strengthening plate or stiffener and can therefore support a thickness of as little as 0.18mm +/-0.05.
4. Hirose Ensures Reliability
   Hirose’s patented half tuning fork contacts maintain the required normal force without relying on the connector housing. With our competitor’s conventional products the housing walls support the contact force, which does not provide for long-term reliability.
5. Prevention of Solder Bridge
   Excess solder cavity absorbs excessive solder and avoids solder bridging.
6. Three different assembly types
   FH12 is offered in Top & Bottom Contact and Vertical Mount and offered in both a 0.5mm contact pitch as well as a 1.0mm contact pitch (bottom contact only).

4 Pad Version · 12.9 x 4.73 mm

■ reflow soldering temperature: 260 °C max.

■ package height 5.0 mm

[Sharma]

Features
■ Carbon composition/Industrial/Sealed
■ Locking-Bushing/Standard-Bushing
■ Meet MIL-R-94

Description:
Small SMD OCXO with tight sTability.
AT and SC-cut versions available.

Features
• 5 MHz, 10 MHz, 13 MHz standard. Other frequencies available from 2 to 80 MHz
• STability as low as ±5 x 10-8 over 0°C to 50°C
• Aging: 1 x 10-9 per day
• Package: 25.4 x 22 x 10.5 mm
• Supply voltage: +3.3 or +5.0 V

Features
■ Carbon composition/Industrial/Sealed
■ Locking-Bushing/Standard-Bushing
■ Meet MIL-R-94

Description

The PJ-B2980 Series of quartz crystal oscillators provide DPECL Fast Edge compatible signals. Systems designers may now specify space-saving, cost-effective packaged PECL oscillators to meet their timing requirements.

Features

• Wide frequency range–60.0MHz to 312.5MHz

• User specified tolerance available

• Space-saving alternative to discrete component oscillators

• High shock resistance, to 1000g

• 2.5 volt operation

• Metal lid electrically connected to ground to reduce EMI

• High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions

• Low Jitter - Wavecrest jitter characterization available

• Overtone technology

• High Q Crystal actively tuned oscillator circuit

• Power supply decoupling internal

• No internal PLL avoids cascading PLL problems

• High frequencies due to proprietary design

• Gold plated pads

• RoHS Compliant, Lead Free Construction

DESCRIPTION
The popular 1N5221 thru 1N5281B series of 0.5 watt Zener Voltage Regulators provides a selection from 2.4 to 200 volts in standard 5% or 10% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These glass axial-leaded DO-35 Zeners are also available in various military screening levels by adding a prefix identifier as described in the Features section. Microsemi also offers numerous other Zener products to meet higher and lower power applications.

FEATURES
• JEDEC registered 1N5221 to 1N5281B
• Internal bonds optionally available with “-1” suffix
• Options for screening in accordance with MIL-PRF- 19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers with “-1” suffix.
• Surface mount equivalents available as MLL5221 to MLL5281B in the DO-213AA MELF style package including “-1” suffix options (consult factory for others)
• RoHS Compliant devices available by adding “e3” suffix
• DO-7 glass body axial-leaded Zener equivalents are also available

APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating current and temperature range
• Extensive selection from 2.4 to 200 V
• Standard voltage tolerances are plus/minus 5% with B suffix, 10 % with A suffix identification
• Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD (MIL-STD-750 Method 1020)
• Minimal capacitance (see Figure 2)
• Inherently radiation hard per MicroNote 050