Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : TPS60100 TPS60100PWP TPS60100PWPG4 TPS60100PWPR TPS60100PWPRG4 TI
Texas Instruments
Description : REGULATED 3.3 V 200-mA LOW-NOISE CHARGE PUMP DC/DC CONVERTER View

description
The TPS60100 step-up, REGULATED CHARGE PUMP generates a 3.3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, NiCd, or NiMH batteries). Output current is 200 mA from a 2-V input. Only four external capacitors are needed to build a complete LOW-noise DC/DC converter. The push-pull operating mode of two single-ended CHARGE PUMPs assures the LOW output voltage ripple as current is continuously transferred to the output. From a 2-V input, the TPS60100 can start into full load with loads as LOW as 16 Ω.

features
● Up to 200-mA Output Current
● Less Than 5-mVpp Output Voltage Ripple
● No Inductors Required/LOW EMI
● REGULATED 3.3-V ±4% Output
● Only Four External Components Required
● Up to 90% Efficiency
● 1.8-V to 3.6-V Input Voltage Range
● 50-µA Quiescent Supply Current
● 0.05-µA Shutdown Current
● Load Isolated in Shutdown
● Space-Saving Thermally-Enhanced TSSOP PowerPAD™ Package
● Evaluation Module Available (TPS60100EVM−131)

applications
Replaces DC/DC CONVERTERS With Inductors in
   − Battery-Powered Applications
   − Two Battery Cells to 3.3-V Conversion
   − Portable Instruments
   − Battery-Powered Microprocessor and
      DSP Systems
   − Miniature Equipment
   − Backup-Battery Boost CONVERTERS
   − PDAs
   − Laptops
   − Handheld Instrumentation
   − Medical Instruments
   − Cordless Phones

Part Name(s) : TPS60110 TPS60110PWP TPS60110PWPG4 TPS60110PWPR TPS60110PWPRG4 TI
Texas Instruments
Description : REGULATED 5-V 300-mA LOW-NOISE CHARGE PUMP DC/DC CONVERTER View

description

The TPS60110 step-up, REGULATED CHARGE PUMP generates a 5-V ±4% output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries; or, one lithium or lithium ion battery). Output current is 300 mA from a 3-V input. Only four external capacitors are needed to build a complete LOW-noise DC/DC converter. The push-pull operating mode of two single-ended CHARGE PUMPs assures the LOW output voltage ripple as current is continuously transferred to the output. From a 3-V input, the TPS60110 can start into full load with loads as LOW as 16 Ω.



features

• Up to 300-mA Output Current

• Less Than 10-mVpp Output Voltage Ripple

• No Inductors Required/LOW EMI

REGULATED 5-V ±4% Output

• Only Four External Components Required

• Up to 90% Efficiency

• 2.7-V to 5.4-V Input Voltage Range

• 60-µA Quiescent Supply Current

• 0.05-µA Shutdown Current

• Load Isolated in Shutdown

• Space-Saving Thermally-Enhanced TSSOP PowerPAD Package

• Evaluation Module Available (TPS60110EVM−132)



applications

• Replaces DC/DC CONVERTERS With Inductors in

   − Battery-Powered Applications

   − Li-Ion Battery to 5-V Conversion

   − Portable Instruments

   − Battery-Powered Microprocessor Systems

   − Miniature Equipment

   − Backup-Battery Boost CONVERTERS

   − PDAs

   − Laptops

   − Handheld Instrumentation

   − Medical Instruments



 


Part Name(s) : TPS60111 TPS60111PWP TPS60111PWPG4 TPS60111PWPR TI
Texas Instruments
Description : REGULATED 5-V 150-mA LOW-NOISE CHARGE PUMP DC/DC CONVERTER View

description
The TPS60111 step-up, REGULATED CHARGE PUMP generates a 5-V ±4% output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries; or, one lithium or lithium ion battery). Output current is 150 mA from a 3-V input. Only four external capacitors are needed to build a complete LOW-noise DC/DC converter. The push-pull operating mode of two single-ended CHARGE PUMPs assures the LOW output voltage ripple as current is continuously transferred to the output. From a 3-V input, the TPS60111 can start into full load with loads as LOW as 33 Ω.
The TPS60111 features either constant frequency mode to minimize noise and output voltage ripple or the power-saving pulse-skip mode to extend battery life at light loads. The TPS60111 switching frequency is 300 kHz. The logic shutdown function reduces the supply current to 1-µA (max) and disconnects the load from the input. Special current-control circuitry prevents excessive cur rent from being drawn from the battery during start-up. This DC/DC converter requires no inductors and has LOW EMI. It is available in the small 20-pin TSSOP PowerPAD™ package (PWP).

features
● Up to 150-mA Output Current
● Less Than 10-mV
   pp Output Voltage Ripple
● No Inductors Required/LOW EMI
REGULATED 5-V ±4% Output
● Only Four External Components Required
● Up to 90% Efficiency
● 2.7-V to 5.4-V Input Voltage Range
● 60-µA Quiescent Supply Current
● 0.05-µA Shutdown Current
● Load Isolated in Shutdown
● Space-Saving Thermally-Enhanced TSSOP
   PowerPAD™ Package
● Evaluation Module Available
   (TPS60110EVM−132)

applications
Replaces DC/DC CONVERTERS With Inductors in
   − Battery-Powered Applications
   − Li-Ion Battery to 5-V Conversion
   − Portable Instruments
   − Battery-Powered Microprocessor
      Systems
   − Miniature Equipment
   − Backup-Battery Boost CONVERTERS
   − PDAs
   − Laptops
   − Handheld Instrumentation
   − Medical Instruments

Part Name(s) : TPS60100 TPS60100PWP TPS60100PWPR TPS60100PWPRG4 TPS60100EVM-131 Texas-Instruments
Texas Instruments
Description : REGULATED 3.3 V 200-mA LOW-NOISE CHARGE PUMP DC/DC CONVERTER View

description
The TPS60100 step-up, REGULATED CHARGE PUMP generates a 3.3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, NiCd, or NiMH batteries). Output current is 200 mA from a 2-V input. Only four external capacitors are needed to build a complete LOW-noise DC/DC converter. The push-pull operating mode of two single-ended CHARGE PUMPs assures the LOW output voltage ripple as current is continuously transferred to the output. From a 2-V input, the TPS60100 can start into full load with loads as LOW as 16 Ω.
The TPS60100 features either constant frequency mode to minimize noise and output voltage ripple or the power-saving pulse-skip mode to extend battery life at light loads. The TPS60100 switching frequency is 300 kHz. The logic shutdown function reduces the supply current to 1-µA (max) and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This DC/DC converter requires no inductors and has LOW EMI. It is available in the small 20-pin TSSOP PowerPAD™ package (PWP).

features
● Up to 200-mA Output Current
● Less Than 5-mVpp Output Voltage Ripple
● No Inductors Required/LOW EMI
REGULATED 3.3-V ±4% Output
● Only Four External Components Required
● Up to 90% Efficiency
● 1.8-V to 3.6-V Input Voltage Range
● 50-µA Quiescent Supply Current
● 0.05-µA Shutdown Current
● Load Isolated in Shutdown
● Space-Saving Thermally-Enhanced TSSOP
   PowerPAD™ Package
● Evaluation Module Available
   (TPS60100EVM−131)

applications
Replaces DC/DC CONVERTERS With Inductors in
   − Battery-Powered Applications
   − Two Battery Cells to 3.3-V Conversion
   − Portable Instruments
   − Battery-Powered Microprocessor and
      DSP Systems
   − Miniature Equipment
   − Backup-Battery Boost CONVERTERS
   − PDAs
   − Laptops
   − Handheld Instrumentation
   − Medical Instruments
   − Cordless Phones


Part Name(s) : TPS60130 TPS60130PWP TPS60130PWPG4 TPS60130PWPR TPS60131 TPS60131PWP TPS60131PWPG4 TPS60131PWPR TPS60131PWPRG4 TPS60132 TI
Texas Instruments
Description : REGULATED 5-V, 300-mA High-Efficiency CHARGE PUMP DC-DC CONVERTERS View

Description
The TPS6013x step-up, REGULATED CHARGE PUMP devices generate a 5-V ±4% output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries or one Lithium or Lilon battery). The output current is 300 mA for the TPS60130 and TPS60131, and 150 mA for the TPS60132 and TPS60133 devices, all from a 3-V input. Only four external capacitors are required to build a complete high efficiency DC/DC CHARGE PUMP converter. To achieve the high efficiency over a wide input voltage range, the CHARGE PUMP automatically selects between a 1.5× or doubler conversion mode. From a 3-V input, all ICs can start with full load current.

Features
• Up to 90% Efficiency From 2.7-V to 5.4-V Input Voltage Range Because of Special Switching Topology
• Up to 300-mA Output Current (TPS60130 and TPS60131)
• No Inductors Required, LOW EMI
REGULATED 5-V ±4% Output
• Only Four External Components Required
• 60-µA Quiescent Supply Current
• 0.05-µA Shutdown Current
• Load Disconnected in Shutdown
• Thermally-Enhanced PowerPAD™ Package

Applications
• Battery-Powered Applications
• Three Battery Cells to 5-V Conversion or Point-ofUse 3.3-V to 5-V Conversion
• Lilon Battery to 5-V Conversion
• Portable Instruments
• Battery-Powered Microprocessor Systems
• Backup-Battery Boost CONVERTERS
• PDA’s, Organizers, Laptops
• Handheld Instrumentation
• Medical Instruments (for example, Glucose Meters)
• PCMCIA and 5-V Smart Card Supply

Part Name(s) : TPS60130EVM-143 TPS60132PWPR TPS60130EVM-143 TI
Texas Instruments
Description : REGULATED 5-V, 300 mA HIGH EFFICIENCY CHARGE PUMP DC/DC CONVERTERS View

description
The TPS6013x step-up, REGULATED CHARGE PUMPs generate a 5-V ±4% output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries or one Lithium or Lilon battery). The output current is 300 mA for the TPS60130/ TPS60131 and 150 mA for the TPS60132/ TPS60133, all from a 3-V input. Only four external capacitors are needed to build a complete high efficiency DC/DC CHARGE PUMP converter. To achieve the high efficiency over a wide input voltage range, the CHARGE PUMP automatically selects between a 1.5x or doubler conversion mode. From a 3-V input, all ICs can start with full load current.

features
● Up to 90% Efficiency From 2.7-V to 5.4-V Input Voltage Range Because of Special Switching Topology
● Up to 300-mA Output Current (TPS60130 and TPS60131)
● No Inductors Required, LOW EMI
REGULATED 5-V ±4% Output
● Only Four External Components Required
● 60-µA Quiescent Supply Current
● 0.05-µA Shutdown Current
● Load Disconnected in Shutdown
● Space-Saving, Thermally-Enhanced PowerPAD™ Package
● Evaluation Module Available (TPS60130EVM–143)

applications
● Battery-Powered Applications
● Three Battery Cells to 5-V Conversion or Point-of-Use 3.3 V to 5-V Conversion
● Lilon Battery to 5-V Conversion
● Portable Instruments
● Battery-Powered Microprocessor Systems
● Backup-Battery Boost CONVERTERS
● PDA’s, Organizers, Laptops
● Handheld Instrumentation
● Medical Instruments (e.g., Glucose Meters)
● PCMCIA and 5-V Smart Card Supply

Part Name(s) : TPS60140 TPS60141 TPS60140PWP TPS60141PWP TPS60140PWPR TPS60141PWPR TI
Texas Instruments
Description : LOW POWER DC-DC CONVERTER REGULATED 5 V, 100-mA CHARGE PUMP VOLTAGE TRIPLER View

description
The TPS6014x step-up, REGULATED CHARGE PUMPs generate a 5-V ±4% output voltage from a 1.8 V to 3.6 V input voltage range. The devices are typically powered by two alkaline, NiCd, or NiMH battery cells and provide an output current of minimum 100 mA from a 2-V input. Only four external capacitors are needed to build a complete voltage tripler CHARGE PUMP.

features
REGULATED 5 V ± 4% Output Voltage With up to 100 mA Output Current From a 1.8 V to 3.6 V Input Voltage Range
● 65-µA Quiescent Supply Current
● 0.05-µA Shutdown Current, Battery Is Isolated From Load in Shutdown
● Integrated LOW-Battery or Power-Good Indicator
LOW Output Voltage Ripple Over Complete Output Current Range
● Easy-To-Design With LOW-EMI Power Supply Since no Inductors Are Required
● Evaluation Module Available (TPS60140EVM-144) ·

applications
● Replaces DC/DC CONVERTERS With Inductors in Battery-Powered Applications:
    – Two Battery Cells to 5 V Conversion
    – Portable Instruments
    – Miniature Equipment
    – Backup-Battery Boost CONVERTERS
    – Medical Instruments
    – 5-V Smart Card Supply
    – Organizers, PDAs

Part Name(s) : TPS60140 TPS60141 TPS60140PWP TPS60140PWPR TPS60140PWPRG4 TPS60141PWP TPS60141PWPR Texas-Instruments
Texas Instruments
Description : LOW Power DC-DC Converter REGULATED 5-V, 100-mA CHARGE PUMP Voltage Tripler View

Description
The TPS6014x step-up, REGULATED CHARGE PUMPs generate a 5-V ±4% output voltage from a 1.8-V to 3.6-V input voltage range. The devices are typically powered by two alkaline, NiCd, or NiMH battery cells and provide an output current of minimum 100 mA from a 2-V input. Only four external capacitors are needed to build a complete voltage tripler CHARGE PUMP.

Features
REGULATED 5 V ±4% Output Voltage
• Up to 100-mA Output Current
• 1.8-V to 3.6-V Input Voltage Range
• 65-µA Quiescent Supply Current
• 0.05-µA Shutdown Current, Battery Is Isolated From Load in Shutdown
• Integrated LOW-Battery or Power-Good Indicator
LOW-Output Voltage Ripple Over Complete Output Current Range
• Easy-to-Design With LOW-EMI Power Supply Because No Inductors Are Required
• Evaluation Module Available (TPS60140EVM-144)
• Available in a 6.5-mm × 4.4-mm 20-Pin HTSSOP Package

Applications
• Replacement of DC-DC CONVERTERS With Inductors in Battery-Powered Applications:
    – Two Battery Cells to 5-V Conversions
    – Portable Instruments
    – Miniature Equipment
    – Backup-Battery Boost CONVERTERS
    – Medical Instruments
    – 5-V Smart Card Supplies

Part Name(s) : TPS60200DGS TPS60200DGSG4 TPS60200DGSR TPS60201DGS TPS60202DGS TPS60202DGSR TPS60203DGS TPS60203DGSR TPS60200 TPS60201 Texas-Instruments
Texas Instruments
Description : REGULATED 3.3 V, 100-mA LOW-Ripple CHARGE PUMP LOW Power DC/DC CONVERTERS View

Description
The TPS6020x step-up, REGULATED CHARGE PUMPs generate a 3.3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage. The devices are typically powered by two Alkaline, NiCd or NiMH battery cells and operate down to a minimum supply voltage of 1.6 V. Continuous output current is a minimum of 100 mA for the TPS60200 and TPS60201 and 50 mA for the TPS60202 and TPS60203, all from a 2-V input. Only four external capacitors are needed to build a complete LOW-ripple DC/DC converter. The push-pull operating mode of two single-ended CHARGE PUMPs assures the LOW output voltage ripple as current is continuously transferred to the output.

Features
REGULATED 3.3-V Output Voltage With up to 100-mA Output Current From a 1.8-V to 3.6-V Input Voltage
• Less Than 5-mV (PP) Output Voltage Ripple Achieved With Push-Pull Topology
• Integrated LOW-Battery and Power-Good Detector
• Switching Frequency Can Be Synchronized to External Clock Signal
• Extends Battery Usage With up to 90% Efficiency and 35-μA Quiescent Supply Current
• Reliable System Shutdown Because Output Capacitor Is DisCHARGEd When Device Is Disabled
• Easy-to-Design, LOW-Cost, LOW-EMI Power Supply Since No Inductors Are Used
• 0.05-μA Shutdown Current, Battery Is Isolated From Load in Shutdown Mode
• Compact Converter Solution in UltraSmall 10-pin MSOP With Only Four External Capacitors Required
• Evaluation Module Available (TPS60200EVM-145)

Applications
• Two Battery Cells to 3.3-V Conversion
• MP3 Portable Audio Players
• Battery-Powered Microprocessor Systems
• Backup-Battery Boost CONVERTERS
• PDAs, Organizers, and Cordless Phones
• Handheld Instrumentation
• Glucose Meters and Other Medical Instruments

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]