Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : M5238AFP M5238AL M5238AP Mitsubishi
MITSUBISHI ELECTRIC
Description : DUAL Low-Noise J-FET INPUT Operational Amplifiers View

DUAL Low-Noise J-FET INPUT Operational Amplifiers

Part Name(s) : TLE2074Y TI
Texas Instruments
Description : EXCALIBUR Low-Noise HIGH-SPEED JFET-INPUT Operational Amplifiers View

description
The TLE207x series of JFET-input Operational Amplifiers more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET Operational Amplifiers. Texas Instruments Excalibur process yields a typical Noise floor of 11.6 nV/√Hz, 17-nV/√Hz ensured maximum, offering immediate improvement in Noise-sensitive circuits designed using the TL07x. The TLE207x also has wider supply voltage rails, increasing the dynamic signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE207x are pin-compatible with Lower performance BiFET Operational Amplifiers for ease in improving performance in existing designs.

● Direct Upgrades to TL05x, TL07x, and TL08x BiFET Operational Amplifiers
● Greater Than 2× Bandwidth (10 MHz) and 3× Slew Rate (45 V/µs) Than TL07x
● Ensured Maximum Noise Floor 17 nV/√Hz
● On-Chip Offset Voltage Trimming for Improved DC Performance
● Wider Supply Rails Increase Dynamic Signal Range to ±19 V

Part Name(s) : TL071AC TL071ACP TL071C TL071CD TL072AC TL072ACD TL072ACP TL072C TL072CD TL074AC Motorola
Motorola => Freescale
Description : Low Noise, JFET INPUT Operational Amplifiers View

Low Noise, JFET Input Operational Amplifiers

These Low Noise JFET input Operational Amplifiers combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated Operational amplifier has well matched high voltage JFET input device for Low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with Low input bias currents, input offset currents, and supply currents. Moreover, the devices exhibit Low Noise and Low harmonic distortion, making them ideal for use in high fidelity audio amplifier applications.
These devices are available in single, dual and quad Operational Amplifiers which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.

Low Input Noise Voltage: 18 nV/√Hz Typ
Low Harmonic Distortion: 0.01% Typ
Low Input Bias and Offset Currents
• High Input Impedance: 10 12 Ω Typ
• High Slew Rate: 13 V/µs Typ
• Wide Gain Bandwidth: 4.0 MHz Typ
Low Supply Current: 1.4 mA per Amp

Part Name(s) : M5219FP M5219L M5219P Mitsumi
Mitsumi
Description : DUAL Low-Noise Operational Amplifiers(DUAL POWER SUPPLY TYPE) View

DUAL Low-Noise Operational Amplifiers(DUAL POWER SUPPLY TYPE)



Part Name(s) : AN6555 AN6556 AN6556S ETC
Unspecified
Description : Low Noise Dual Operational Amplifiers View

[Panasonic]

■ Overview
The AN6555, the AN6556, and the AN6556S are Low Noise, high slew rate dual Operational Amplifiers with phase compensation circuits built-in.
They are suitable for applications to various electronic circuits such as active filters and audio preAmplifiers.

■ Features
• Phase compensation circuit
• High voltage gain:Gv=100 dB typ.
Low Noise:input referred Noise voltage Vni=1.5µ Vrms typ.
• High slew rate:SR=2V/µ s typ.
• Output short-circuit protection

Part Name(s) : AN6555 AN6556 AN6556S Panasonic
Panasonic Corporation
Description : Low Noise Dual Operational Amplifiers View

■ Overview
The AN6555, the AN6556, and the AN6556S are Low Noise, high slew rate dual Operational Amplifiers with phase compensation circuits built-in.
They are suitable for applications to various electronic circuits such as active filters and audio preAmplifiers.

■ Features
• Phase compensation circuit
• High voltage gain:Gv=100 dB typ.
Low Noise:input referred Noise voltage Vni=1.5µ Vrms typ.
• High slew rate:SR=2V/µ s typ.
• Output short-circuit protection

Part Name(s) : AN6557 AN6558 AN6558S Panasonic
Panasonic Corporation
Description : Dual Low Noise, High Slew Rate Operational Amplifiers View

■ Overview

The AN6557, the AN6558, and the AN6558S are Low Noise, high slew rate dual Operational Amplifiers with phase compensation circuits built-in. They are suitable for application to various electronic circuits such as ac tive filters and audio preAmplifiers. Moreover, they are high output current type and can also be used as head phone Amplifiers.



■ Features

• Phase compensation circuit

• High voltage gain:GV=100dB typ.

Low Noise:Vni=0.9µ Vrms typ.

• High slew rate:SR=6V/µ s typ.

• High output current:IO=25mA typ.



 


Part Name(s) : ON2990 TL071AC TL071ACP TL071C TL071CD TL072AC TL072ACD TL072ACP TL072C TL072CD ON-Semiconductor
ON Semiconductor
Description : Low Noise, JFET Input Operational Amplifiers View

These Low Noise JFET input Operational Amplifiers combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated Operational amplifier has well matched high voltage JFET input device for Low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with Low input bias currents, input offset currents, and supply currents. Moreover, the devices exhibit Low Noise and Low harmonic distortion, making them ideal for use in high fidelity audio amplifier applications.
These devices are available in single, dual and quad Operational Amplifiers which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.

Low Input Noise Voltage: 18 nV/√Hz Typ
Low Harmonic Distortion: 0.01% Typ
Low Input Bias and Offset Currents
• High Input Impedance: 10 12 Ω Typ
• High Slew Rate: 13 V/µs Typ
• Wide Gain Bandwidth: 4.0 MHz Typ
Low Supply Current: 1.4 mA per Amp

Part Name(s) : OP113EP OP113FP OP213EP OP413EP OP413FP ADI
Analog Devices
Description : Low Noise, Low Drift Single-Supply Operational Amplifiers View

GENERAL DESCRIPTION
The OP113 family of single supply Operational Amplifiers features both Low Noise and drift. It has been designed for systems with internal calibration. Often these processor-based systems are capable of calibrating corrections for offset and gain, but they cannot correct for temperature drifts and Noise.
   
FEATURES
    Single- or Dual-Supply Operation
    Low Noise: 4.7 nV/√Hz @ 1 kHz
    Wide Bandwidth: 3.4 MHz
    Low Offset Voltage: 100 μV
    Very Low Drift: 0.2 μV/°C
    Unity Gain Stable
    No Phase Reversal
   
APPLICATIONS
    Digital Scales
    Multimedia
    Strain Gages
    Battery Powered Instrumentation
    Temperature Transducer Amplifier
   

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]