NT405F / TO 220 Type
DUAL FAST RECOVERY RECTIFIER IN TO220 METAL PACKAGE FOR HI–REL APPLICATIONS
FEATURES
• HERMETIC TO220 METAL PACKAGE
• ISOLATED CASE
Functional Description
TLE 4267 is a 5-V low-drop voltage regulator in a TO220-7 package. It supplies an output current of > 400 mA. The IC is shortcircuit-proof and incorporates temperature protection that disables the IC at overtemperature.
Features
● Output voltage tolerance ≤ ± 2 %
● Low-drop voltage
● Very low standby current consumption
● Input voltage up to 40 V
● Overvoltage protection up to 60 V (≤ 400 ms)
● Reset function down to 1 V output voltage
● ESD protection up to 2000 V
● Adjustable reset time
● On/off logic
● Overtemperature protection
● Reverse polarity protection
● Short-circuit proof
● Wide temperature range
● Suitable for use in automotive electronics
Application
The IC regulates an input voltage VI in the range 5.5 V < VI < 40 V to VQrated = 5.0 V. A reset signal is generated for an output voltage VQ of < 4.5 V. The reset delay can be set with an external capacitor. The device has two logic inputs. It is turned-ON by a voltage of > 4 V on E2 by the ignition for example. It remains active as a function of the voltage on E6, even if the voltage on E2 goes Low. This makes it possible to implement a self holding circuit without external components. When the device is turned-OFF, the output voltage drops to 0 V and current consumption tends towards 0 µA.
TESLA
KT201/600 : Tyristor 600V, 3A, 10mA TO220
KT201/100 : Tyristor 100V, 3A, 10mA TO220
Description:
The NTE5498 and NTE5499 silicon controlled rectifiers are high performance glass passivated PNPN devices in a TO220 type package designed for general purpose high current applications where moderate gate sensitivity is required.
Functional Description
TLE 4267 is a 5-V low drop voltage regulator for automotive applications in the PG-TO220-7 or PG-DSO-14-30 package. It supplies an output current of > 400 mA. The IC is shortcircuit-proof and has an overtemperature protection circuit.
Features
• Output voltage tolerance ≤ ±2%
• 400 mA output current capability
• Low-drop voltage
• Very low standby current consumption
• Input voltage up to 40 V
• Overvoltage protection up to 60 V (≤ 400 ms)
• Reset function down to 1 V output voltage
• ESD protection up to 2000 V
• Adjustable reset time
• On/off logic
• Overtemperature protection
• Reverse polarity protection
• Short-circuit proof
• Wide temperature range
• Suitable for use in automotive electronics
• Green Product (RoHS compliant)
• AEC Qualified
Application
The IC regulates an input voltage VI in the range of 5.5 V < VI < 40 V to a nominal output voltage of VQ = 5.0 V. A reset signal is generated for an output voltage of VQ < VRT (typ. 4.5 V). The reset delay can be set with an external capacitor. The device has two logic inputs. A voltage of VE2 > 4.0 V given to the E2-pin (e.g. by ignition) turns the device on. Depending on the voltage on pin E6 the IC may be hold in active-state even if VE2 goes to low level. This makes it simple to implement a self-holding circuit without external components. When the device is turned off, the output voltage drops to 0 V and current consumption tends towards 0 μA.
Speed TEMPFET®
• N-Channel
• Enhancement mode
• Logic Level Input
• Analog driving possible
• Fast switching up to 1 MHz
• Potential-free temperature sensor with thyristor characteristics
• Overtemperature protection
• Avalanche rated
• High current pinning
• Green Product(RoHS compliant)
• AEC Qualified
FEATURES
• HERMETIC TO220 METAL PACKAGE
• ISOLATED CASE
• SCREENING OPTIONS AVAILABLE
• OUTPUT CURRENT 16A
• LOW VF
• LOW LEAKAGE
FEATURES
• HERMETIC TO220 METAL PACKAGE
• ISOLATED CASE
• SCREENING OPTIONS AVAILABLE
• OUTPUT CURRENT 30A
• LOW VF
• LOW LEAKAGE
1234 |
|