Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
ELM-Electronics
Elm Electronics
Description : NTSC Video Generator

Description
The ELM304 is a low-cost NTSC Video signal Generator in an 8 pin package. It requires only a few external components in order to generate a stable monochrome raster that is useful in a variety of Video applications.

Features
• North American 525 line 60Hz NTSC signal
• Standard 1V p-p NTSC sync negative output
• Generates both solid and bar type patterns
• No external amplifier required
• Requires no adjustments
• Wide supply range - 3.0 to 5.5 volt operation
• Uses a standard 3.58MHz crystal
• Low power CMOS design

Applications
Video Source for Video Cassette Recorders
• Classroom Instructional Aid
• Test Bench Video Generator

ELM
Elm Electronics
Description : NTSC Video Generator

Description
The ELM304 is a low-cost NTSC Video signal Generator in an 8 pin package. Requiring only an external crystal and a few passive components, this circuit produces a stable raster that is suitable for a variety of Video applications.

Features
• Low power CMOS design - typically 1mA at 5V
• Wide supply range - 3.0 to 5.5 volt operation
• Uses a standard 3.58MHz crystal
• Generates both solid and bar type patterns
• No external amplifier required
• Standard 1V p-p NTSC sync negative output
• Requires no adjustments

Applications
Video Source for Video Cassette Recorders
• Classroom Instructional Aid
• Test Bench Video Generator

Part Name(s) : SPT2110 SPT2110SCT
SPT
Signal Processing Technologies
Description : NTSC/PAL Video DECODER

GENERAL DESCRIPTION
The SPT2110 is a high-performance Video digital signal processor for NTSC and PAL applications. It processes 9-bit composite digitized Video or two 9-bit component digitized Video signals. All internal processing is done at 9 or more bits. The decoder outputs the image data in YCrCb (4:2:2) or RGB (4:4:4) formats. This product has many advanced internal features not found in other decoder products.

FEATURES
NTSC/PAL Video System Compatible
• Dual 9-Bit Wide Data Paths for Video Processing
• Composite or Component Video Inputs
• Supports Three Video Sampled Modes: Square Pixel, ITU-R BT.601 (CCIR-601), and 4Fsc (NTSC Only)
• Sync Detector and Complete Timing Generator
• Comb Filters (NTSC)
• Two Output Formats: YCrCb (4:2:2), RGB (4:4:4)
• Picture Quality Adjustment Functions:
    Luminance Signal: Peaking Compensation, Contrast, Brightness
    Chrominance Signal: Hue, Saturation
• MPU Interface Control
• 100-Lead PQFP Package
• +3.3 V Single Power Supply

APPLICATIONS
• High-End NTSC or PAL Video Decoding
• S-Video Decoding
• Composite Video Decoding
Video Frame Grabbers
Video Projection and Displays
• Digital VCRs
• Digital Video Transmitters
Video Printers
• Image Filing Systems
• Multimedia PCs
• Advanced Set-Top Boxes
• Security Cameras

Part Name(s) : CXD1217M
Sony
Sony Semiconductor
Description : Synchronizing Signal Generator for Video Camera

Description
The CXD1217M is a synchronizing signal Generator for color Video cameras.

Features
• Compatible with the respective systems, NTSC, PALM, PAL and SECAM
• Output is synchronized with the clock of 910fH or 908fH
• 25Hz offset processing by PAL system
• Color framing by the respective systems, NTSC, PALM and PAL
• Possible external synchronization by H reset, V reset and line alternate reset pins

Applications
    Synchronizing signal Generator for color Video cameras

Part Name(s) : CXD1217Q CXD1217
Sony
Sony Semiconductor
Description : Synchronizing Signal Generator for Video Camera

Description
The CXD1217Q is a synchronizing signal Generator for color Video cameras.

Features
• Compatible with the respective systems, NTSC, PALM, PAL and SECAM
• Output is synchronized with the clock of 910fH or 908fH
• 25Hz offset processing by PAL system
• Color framing by the respective systems, NTSC, PALM and PAL
• Possible external synchronization by H reset, V reset and line alternate reset pins

Applications
    Synchronizing signal Generator for color Video cameras

Part Name(s) : KA2154
Samsung
Samsung
Description : Video-CHROMA DEFLECTION SYSTEM FOR A COLOR TELEVISION (PAL/NTSC)

Video-CHROMA DEFLECTION SYSTEM FOR A COLOR TELEVISION (PAL/NTSC)

The KA2154 combines a PAL/NTSC Video-chroma subsystem and a deflection combination on a single monolithic integrated circuit to provide a PAL or PAL/NTSC color television.
This device includes a Video amplifier, PAL and NTSC color demodulator. These are designed to provide color differential signal outputs, and an improved sync separator, horizontal oscillator with saw tooth wave type AFC, horizontal pre-driver with X-ray protection circuit vertical oscillator and vertical pre-driver in a 42-lead, dual in-line type plastic package.

Part Name(s) : VP536E
ZARLINK
Zarlink Semiconductor Inc
Description : NTSC/PAL Digital Video Encoder

DESCRIPTION
The VP536E converts digital RGB data (3x8bits) into analog NTSC/PAL composite Video and S-Video signals. The outputs are capable of driving doubly terminated 75 ohm loads with standard Video levels.
The device will also accept YUV data. Progressive scan (non-interlaced fields) Video display is available in both NTSC and PAL modes.
The output pixel rate is approximately 7 times Fsc (color subcarrier frequency) for NTSC (6.6 times Fsc for PAL) which is approximately 25MHz. Input pixel rate is half this frequency; approximately 12.5MHz.

FEATURES
■ Converts RGB data (3x8bits) to analog composite Video and S-Video
■ Internal Video timing generation
■ RGB or YUV input modes
■ Progressive scanning (non-interlaced fields) display mode optional
■ Separate horizontal and vertical sync outputs
■ 68 pin PLCC package

APPLICATIONS
■ Multi-media
Video Games
■ PC’s
■ Graphics
■ Display Adaptors
Video Effects Processors

ETC
Unspecified
Description : YCrCb or RGB to NTSC/PAL Digital Video Encoder

[Brooktree]



YCrCb or RGB to NTSC/PAL Digital Video Encoder



The Bt856/7 is designed specifically for Video systems requiring the generation of 525-line (NTSC/PAL–M) or 625-line (PAL–B, D, G, H, I, N, N-Argentina) compos ite or Y/C (S-Video) signals.

The Bt856 and Bt857 are functionally identical, with the exception that Bt857 can output the Macrovision anticopy algorithm.



Distinguishing Features

• RGB or YCrCb Inputs, Selectable on a Pixel-by-Pixel Basis

NTSC/PAL/PAL–M/PAL–N (Argentina) Composite Video Output

• S-Video/RGB Outputs Supported

• CCIR 601 or Square Pixel Operation

• 2x Oversampling

• 9-bit DACs

• Master or Slave Video Timing

• Noninterlaced Operation

• Macrovision Support (Bt857 Only)

• Closed Captioning Encoding

• Power-Down Mode

• SCART Support (RGB Outputs)

• I2C Interface

• On-Board Voltage Reference

• Internal Color Bar Generator

• 68-pin PLCC Package



Applications

• Digital Set Top Box

• Direct Broadcast Satellite (DBS)

• Digital Video Disk (DVD)

• Digital VCR

VideoCD


Description : NTSC/PAL Video Encoder

NTSC/PAL Video Encoder

The HMP8190 and HMP8191 are NTSC and PAL encoders designed for use in systems requiring the generation of high quality NTSC and PAL Video.



Features

• (M) NTSC and (B, D, G, H, I, M, N, NC) PAL Operation

• BT.601 and Square Pixel Operation

• Digital Input Formats

- 8-Bit, 16-Bit 4:2:2 YCbCr

- 8-Bit BT.656

• Composite and Y/C Analog Outputs

• Flexible Video Timing Control

- Timing Master or Slave

- Selectable Polarity on Each Control Signal

- Programmable Blank Output Timing

• “Sliced” VBI Data Support

- Closed Captioning

- Widescreen Signalling (WSS)

• Three 2x Oversampling, 10-Bit DACs

- Fast I2C Interface



Applications

• DVD Players

Video CD Players

• Digital VCRs

• Multimedia PCs


Motorola
Motorola => Freescale
Description : NTSC Digital Video Encoder

NTSC Digital Video Encoder HCMOS Technology

The MC44722 and MC44723 are Digital Video Encoders (DVE). They convert ITU-601/656 standard 4:2:2 Bit-Paralellel data into analog composite Video, S-Video or Y/Cb/Cr in PAL and NTSC formats. They accept the multiplexed ((CB,Y,CR)Y) signals from digital sources such as MPEG decoders and can act as a sync Generator master. All Video processing is done digitally and requires no external adjustment.
Specifically designed for digital satellite, digital cable decoders and multimedia terminals.

• World Wide Operation (PAL-BDGHI, PAL-N,PAL-M, NTSC-M)
• SMPTE 170M / ITU - R 624 composite Video output
• Programmable Color Sub-carrier Frequencies
• Analog Horizontal, Vertical, Frame or Composite Sync Outputs
• Sync Extraction From Digital Input Data (SAV, EAV)
• Sync Polarity and Horizontal Phase Control
• Master or Slave Sync (H/Vsync, H/Fsync, ITU-R656 slave) Operation
• Interlaced or Non-Interlaced Support
• 625/50 or 525/60 ITU-601/656 8-bit ((CB,Y,CR)Y) Digital Input
• Luma 2X / Chroma 4X Oversampling Filtering
• External VBI Information Data Input (such as TeleText Information Data)
• CVBS / YS / CS or Y / Cb / Cr Analog Outputs Through 10-bit DACs
• Easily programmed via Serial Bus ( I2C or SPI Bus)
• 2 Hardware I2C Chip Addresses
• Closed-Caption and CGMS Information data Insertion
• MACROVISION ver. 7.01 Anti-Copy Signal Insertion (MC44722 Only support NTSC mode)
• On Chip Color - bar Generator
• +3.3V Power Supply or +3.3V(Digital)/+5V(Analog) Power Supply
• Pin Compatible with MC44720FT

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]