Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : 6N137 HCPL-2601 HCPL-2611 HCPL-2630 HCPL-2631 QT
QT Optoelectronics => Fairchildsemi
Description : Optocoupler. 10 Mbit/s High-Speed Logic Gate Output; GaAsP Input View

DESCRIPTION
The 6N137, HCPL-2601/2611 single-channel and HCPL-2630/2631 dual-channel Optocoupler. consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector Logic Gate with a strobable output. This output features an open collector, thereby permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum Input signal of 5 mA will provide a minimum output sink current of 13
mA (fan out of 8). An internal noise shield provides superior common mode rejection of typically 10kV/µs. The HCPL- 2601 and HCPL- 2631 has a minimum CMR of 5 kV/µs. The HCPL-2611 has a minimum CMR of 10 kV/µs.

FEATURES
• Very high speed-10 Mbit/s
• Superior CMR-10 kV/µs
• Double working voltage-480V
• Fan-out of 8 over -40°C to +85°C
Logic Gate output
• Strobable output
• Wired OR-open collector

Part Name(s) : FOD8160 Fairchild
Fairchild Semiconductor
Description : High Noise Immunity, 3.3 V / 5 V, 10 Mbit/sec, Logic Gate Optocoupler.in Wide-Body SOP 5-Pin View

Description
The FOD8160 is a 3.3 V / 5 V High-Speed Logic Gate Optocoupler.with open collector output, which supports isolated communications to allow digital signals to communicate between systems without conducting ground loops or hazardous voltages. It utilizes Fairchild’s prioprietary Optoplanar® coplanar packaging technology and optimized IC design to achieve high noise immunity, characterized by high common-mode rejection specifications.

Features
■ Optoplanar® packaging technology allows more than 10 mm creepage and clearance distance, and 0.5 mm insulation distance to achieve reliable and high voltage insulation
■ High noise immunity characterized by common-mode transient immunity (CMTI)
    – 20 kV/µs Minimum CMTI
■ Specifications guaranteed over 3 V to 5.5 V supply voltage and -40°C to 100°C extended industrial temperature range
■ High speed, 10 Mbit/sec Data Rate (NRZ)
■ Safety and regulatory approvals
    – UL1577, 5,000 VACRMS for 1 minute
    – DIN-EN/IEC60747-5-5, 1,414 V peak working insulation voltage (pending approval)

Applications
■ Isolating intelligent power module
■ Isolating industrial communication interface

Part Name(s) : HCPL-0600 HCPL-0601 Fairchild
Fairchild Semiconductor
Description : HIGH SPEED-10 Mbit/s Logic Gate Optocoupler. View

DESCRIPTION
The HCPL-0600/0601 Optocoupler. consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector Logic Gate with a strobable output. The devices are housed in a compact small-outline package. This output features an open collector, thereby permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum Input signal of 5 mA will provide a minimum output sink current of 13 mA (fan out of 8). An internal noise shield provides superior common mode rejection of typically 10 kV/µs.
   
FEATURES
• Compact SO8 package
• Very high speed-10 Mbit/s
• Superior CMR-10 kV/µs
• Fan-out of 8 over -40°C to +85°C
Logic Gate output
• Strobable output
• Wired OR-open collector
• U.L. recognized (File # E90700)
   
APPLICATIONS
• Ground loop elimination
• LSTTL to TTL, LSTTL or
    5-volt CMOS
• Line receiver, data transmission
• Data multiplexing
• Switching power supplies
• Pulse transformer replacement
• Computer-peripheral interface
   

Part Name(s) : HCPL0637 HCPL0637R2 HCPL0637R2V HCPL0637V HCPL0638 HCPL0638R2 HCPL0638R2V HCPL0638V HCPL0639 HCPL0639R2 Fairchild
Fairchild Semiconductor
Description : High Speed-10 Mbit/s Logic Gate Optocoupler. View

Single Channel: HCPL0600, HCPL0601, HCPL0611

Dual Channel: HCPL0637, HCPL0638, HCPL0639



Description

The HCPL06XX Optocoupler. consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector Logic Gate with a strobable output (single channel devices). The devices are housed in a compact small-outline package. This output features an open collector, thereby permitting wired OR outputs. The HCPL0600, HCPL0601 and HCPL0611 output consists of bipolar transistors on a bipolar process while the HCPL0637, HCPL0638, and HCPL0639 output consists of bipolar transistors on a CMOS process for reduced power consumption. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. An internal noise shield provides superior common mode rejection.



Features

■ Compact SO8 package

■ Very high speed-10 Mbit/s

■ Superior CMR

Logic Gate output

■ Strobable output (single channel devices)

■ Wired OR-open collector

■ U.L. recognized (File # E90700)

■ IEC60747-5-2 approved (VDE option)

   – HCPL0600, HCPL0601, HCPL0611 only



Applications

■ Ground loop elimination

■ LSTTL to TTL, LSTTL or 5-volt CMOS

■ Line receiver, data transmission

■ Data multiplexing

■ Switching power supplies

■ Pulse transformer replacement

■ Computer-peripheral interface



 



Part Name(s) : SFH636 SFH636-X006 SFH636-X007 SFH636-X009 Vishay
Vishay Semiconductors
Description : Optocoupler. High Speed Phototransistor Output, 1 Mbd, 10 kV/ms CMR, Split Collector Transistor Output View

DESCRIPTION
The SFH636 is an Optocoupler.with a GaAlAs infrared emitting diode, optically coupled to an integrated photo detector consisting of a photo diode and a high speed transistor in a DIP-6 plastic package. The device is functionally similar to 6N136 except there is no base connection, and the electrical foot print is different. Noise and dv/dt performance is enhanced by not bringing out the base connection.

FEATURES
• High speed Optocoupler.without base connection
• Isolation test voltage: 5300 VRMS
• GaAlAs emitter
• Integrated detector with photo diode and transistor
• High data transmission rate: 1.0 Mbit/s
• TTL compatible
• Open collector output
• CTR at IF = 16 mA, VO = 0.4 V, VCC = 4.5 V, Tamb = 25 °C: ≥ 19 %
• Good CTR linearity relative to forward current
• Low coupling capacitance
• dV/dt: typ. 10 kV/µs
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

APPLICATIONS
• IGBT drivers
• Data communications
• Programmable controllers

Part Name(s) : 6N137 6N137S 6N137SD 6N137SDV 6N137SV 6N137TV 6N137V 6N137W HCPL-2601S HCPL-2601SD Fairchild
Fairchild Semiconductor
Description : High Speed-10 Mbit/s Logic Gate Optocoupler. View

Description
The 6N137, HCPL-2601/2611 single-channel and HCPL-2630/2631 dual-channel Optocoupler. consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector Logic Gate with a strobable output. This output features an open collector, thereby permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum Input signal of 5 mA will provide a minimum output sink current of 13mA (fan out of 8).

Features
■ Very high speed-10 Mbit/s
■ Superior CMR-10 kV/µs
■ Double working voltage-480V
■ Fan-out of 8 over -40°C to +85°C
Logic Gate output
■ Strobable output
■ Wired OR-open collector
■ U.L. recognized (File # E90700)

Applications
■ Ground loop elimination
■ LSTTL to TTL, LSTTL or 5-volt CMOS
■ Line receiver, data transmission
■ Data multiplexing
■ Switching power supplies
■ Pulse transformer replacement
■ Computer-peripheral interface

Part Name(s) : HCPL0600 HCPL0600V HCPL0600R1 HCPL0600R1V HCPL0600R2 HCPL0600R2V HCPL0601 HCPL0601V HCPL0601R1 HCPL0601R1V Fairchild
Fairchild Semiconductor
Description : High Speed-10 Mbit/s Logic Gate Optocoupler. View

Description
The HCPL06XX Optocoupler. consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector Logic Gate with a strobable output (single channel devices). The devices are housed in a compact small-outline package. This output features an open collector, thereby permitting wired OR outputs. The HCPL0600 and HCPL0601 output consists of bipolar transistors on a bipolar process while the HCPL0611, HCPL0630 and HCPL0631 output consists of bipolar transistors on a CMOS process for reduced power consumption. The coupled parameters are guaranteed over the temperature range of - 40°C to +85°C. A maximum Input signal of 5 mA will provide a minimum output sink current of 13 mA (fan out of 8). An internal noise shield provides superior common mode rejection.

Features
■ Compact SO8 package
■ Very high speed-10 Mbit/s
■ Superior CMR
■ Fan-out of 8 over -40°C to +85°C
Logic Gate output
■ Strobable output (single channel devices)
■ Wired OR-open collector
■ U.L. recognized (File # E90700)
■ VDE approval pending

Applications
■ Ground loop elimination
■ LSTTL to TTL, LSTTL or 5-volt CMOS
■ Line receiver, data transmission
■ Data multiplexing

Part Name(s) : 6N137 6N137F Toshiba
Toshiba
Description : HIGH SPEED-10 Mbit/s Logic Gate Optocoupler. View

Degital Logic Isolation Tele-Communication Analog Data Equipment Control





The TOSHIBA 6N137 consist of a highemitting diode and a one chip photo IC. This unit is 8-lead DIP package.





•  LSTTL / TTL compatible: 5V Supply

•  Ultra high speed: 10MBd

•  Guaranteed performance overtemperature: 0°C to 70°C

•  High isolation voltage: 2500Vrms min.

•  UL recognized: UL1577, file no. E67349


Part Name(s) : FOD060L FOD060LR1 FOD060LR1V FOD060LR2 FOD060LR2V FOD060LS FOD060LSD FOD060LSDV FOD060LSV FOD060LT Fairchild
Fairchild Semiconductor
Description : LVTTL/LVCMOS 3.3V High Speed-10 Mbit/s Logic Gate Optocoupler. View

Single Channel: FOD060L, FOD260L

Dual Channel: FOD063L



Description

These Optocoupler. consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector Logic Gate. Single channel devices include a strobable output. This output features an open collector, thereby permitting wired OR outputs. The output consists of bipolar transistors in a Bi-CMOS process for reduced power consumption. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum Input signal of 5 mA (3 mA for the FODX6XL versions) will provide a minimum output sink current of 13 mA (fan out of 8). An internal noise shield provides superior common mode rejection of typically 50 kV/µs at 2,000V common mode.



Features

■ Compact SO8 package (except FOD260L – 8-pin DIP)

■ Very high speed – 10 Mbit/s

■ Superior CMR — 50 kV/µs at 2,000V peak

■ Fan-out of 8 over -40°C to +85°C

Logic Gate output

■ Strobable output (single channel devices)

■ Wired OR-open collector

■ U.L. recognized (File # E90700) (pending)

■ UDE approval pending



Applications

■ Ground loop elimination

■ LSTTL to TTL, LSTTL or 5-volt CMOS

■ Line receiver, data transmission

■ Data multiplexing

■ Switching power supplies

■ Pulse transformer replacement

■ Computer-peripheral interface


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]